Metis: the Solar Orbiter visible light and ultraviolet coronal imager

E. Antonucci, M. Romoli, V. Andretta, Silvano Fineschi, P. Heinzel, J. D. Moses, G. Naletto, G. Nicolini, D. Spadaro, L. Teriaca, A. Berlicki, Gerardo Capobianco, Giuseppe Crescenzio, Vania Da Deppo, Mauro Focardi, Fabio Frassetto, K. Heerlein, Federico Landini, Enrico Magli, Andrea Marco Malvezzi, G. Massone, Radek Melich, P. Nicolosi, G. Noci, M. Pancrazzi, Maria Guglielmina Pelizzo, Luca Poletto, C. Sasso, U. Schühle, S. K. Solanki, L. Strachan, Roberto Susino, Giuseppe Tondello, M. Uslenghi, J. Woch, L. Abbo, А. Бемпорад, Marta Casti, S. Dolei, C. Grimani, M. Messerotti, M. Ricci, T. Straus, Daniele Telloni, Paola Zuppella, F. Auchère, R. Bruno, A. Ciaravella, Alain Jody Corso, Miguel Alvarez Copano, R. Aznar Cuadrado, R. D’Amicis, R. Enge, Alessio Gravina, S. Jejčič, P. Lamy, A. C. Lanzafame, Thimo Meierdierks, Ioanna Papagiannaki, Hardi Peter, G. Fernández-Rico, Mewael Sertsu, J. Staub, K. Tsinganos, M. Velli, R. Ventura, Enrico Verroi, J. C. Vial, S. Vivès, A. Volpicelli, Stephan Werner, Andreas Zerr, Barbara Negri, Marco Castronuovo, Alessandro Gabrielli, Roberto Bertacin, Rita Carpentiero, Silvia Natalucci, F. Marliani, Marco Cesa, Philippe Laget, Danilo Morea, Stefano Pieraccini, P. G. Radaelli, Paolo Sandri, Paolo Sarra, Stefano Cesare, Felice Del Forno, Ernesto Massa, Mauro Montabone, Sergio Mottini, Daniele Quattropani, Tiziano Schillaci, Roberto Boccardo, Rosario Brando, Arianna Pandi, Cristian Baietto, S. Bertone, A. Álvarez‐Herrero, P. García ParejoSpringer Link (Chiba Institute of Technology) 2020 · DOI

TL;DR

Metis is a novel coronagraph aboard the Solar Orbiter spacecraft, designed to simultaneously image the Sun's corona in visible and UV light. This unique capability, combined with Solar Orbiter's close-Sun orbit and out-of-ecliptic trajectories, will provide unprecedented insights into solar wind acceleration, coronal mass ejections, and the Sun-heliosphere connection.

What Problem Does This Paper Address?

Understanding the Sun's corona and the origin of the solar wind has been a long-standing challenge. Previous instruments, like SOHO's UVCS, provided crucial data but were limited in their field of view and simultaneous multi-wavelength capabilities. The Metis instrument aims to overcome these limitations by imaging the entire off-limb corona from a unique vantage point, enabling detailed studies of plasma dynamics, magnetic field influence, and the processes driving solar wind acceleration and coronal mass ejections (CMEs). The paper addresses the need for a comprehensive understanding of the inner heliosphere, particularly the region where the solar wind originates and CMEs are launched.

Methods

Metis employs an innovative externally occulted coronagraph design, combining visible light (VL) and ultraviolet (UV) imaging. Key methodological aspects include:

  • Simultaneous VL and UV Imaging: Metis captures images in the visible light band (580-640 nm) and the UV H I Lyman-α line (121.6 nm) concurrently.
  • Novel Occultation Design: An "inverted external occulter" (IEO) and internal occulter (IO) system minimize thermal load and stray light, crucial for close-Sun observations.
  • Broadband Polarimeter: The VL channel includes a polarimeter to measure the linearly polarized component of the K corona, aiding in electron density diagnostics.
  • Doppler Dimming Technique: By comparing VL and UV data, Metis utilizes Doppler dimming to measure the outflow velocity of neutral hydrogen, a proxy for solar wind speed.
  • Advanced Optics: Multi-wavelength coatings on mirrors and interference filters enable simultaneous VL and UV observation through a single optical train.
  • High Spatial and Temporal Resolution: Metis achieves spatial scales down to 2000 km (VL) and 15,000 km (UV) at perihelion, with temporal resolution down to 1 second for VL fluctuations.
  • Unique Orbit: Solar Orbiter's eccentric orbit (down to 0.28 AU) and increasing inclination provide close-up views and out-of-ecliptic perspectives, enabling longer-term studies and disentangling solar rotation effects.

Datasets

Not discussed in the paper. The paper focuses on the instrument design, capabilities, and scientific objectives, rather than presenting results from specific datasets.

Key Insights and Ideas

  • Bridging the Gap: Metis is designed to bridge the gap between remote sensing of the corona and in-situ measurements by Parker Solar Probe, offering a more complete picture of solar wind phenomena.
  • Unprecedented View: The combination of Metis's capabilities with Solar Orbiter's unique orbit promises to revolutionize our understanding of the inner heliosphere, particularly the solar wind acceleration region and CME initiation.
  • Multi-Wavelength Synergy: The simultaneous VL and UV imaging is crucial for deriving key plasma parameters like electron density and outflow velocity, which are difficult to obtain with single-wavelength instruments.
  • Disentangling Rotation: The spacecraft's orbital motion relative to the Sun's rotation at perihelion allows for the study of intrinsic coronal evolution, free from the confounding effects of solar rotation.

Key Results

The paper details the instrument's design, calibration, and expected performance. Key results from the calibration campaigns include:

  • Stray Light Rejection: Metis achieves excellent stray light rejection, with a ratio of less than 10⁻⁹ for the VL channel and less than 10⁻⁷ for the UV channel.
  • Optical Performance: Measured angular resolutions are approximately 20 arcsec for VL and ≥ 80 arcsec for UV.
  • Throughput: Overall efficiencies are reported as 0.118 ± 0.022 for the VL channel and 0.0126 ± 0.004 for the UV channel.
  • Thermal Stability: The instrument is designed to withstand extreme temperature variations encountered during Solar Orbiter's orbit, with stringent tolerances on optical alignment.
  • EMC Compliance: Metis is characterized as an "EMC quiet" instrument, meeting the stringent electromagnetic compatibility requirements of the Solar Orbiter mission.

Limitations and Future Work

  • Data Latency: The significant data latency (weeks to months) due to Solar Orbiter's distance from Earth necessitates careful offline planning of operations.
  • Off-Pointing Constraints: Metis requires precise Sun-pointing, and off-pointing beyond certain angles necessitates closing the heat shield door, limiting observation opportunities.
  • VL Dark Frames: Due to the design of the external door, true in-flight VL detector dark frames are not obtainable.
  • Future Work: The paper outlines future work including the development of a comprehensive data processing and analysis software suite, the implementation of a low-latency data pipeline for near-real-time monitoring, and the application of advanced diagnostic techniques (e.g., wavelet analysis, intermittency measures) to the acquired data. The synergy with other Solar Orbiter instruments and future missions like Parker Solar Probe is also highlighted.

Summary updated

Abstract

Aims. Metis is the first solar coronagraph designed for a space mission and is capable of performing simultaneous imaging of the off-limb solar corona in both visible and UV light. The observations obtained with Metis aboard the Solar Orbiter ESA-NASA observatory will enable us to diagnose, with unprecedented temporal coverage and spatial resolution, the structures and dynamics of the full corona in a square field of view (FoV) of ±2.9° in width, with an inner circular FoV at 1.6°, thus spanning the solar atmosphere from 1.7 R⊙ to about 9 R⊙, owing to the eccentricity of the spacecraft orbit. Due to the uniqueness of the Solar Orbiter mission profile, Metis will be able to observe the solar corona from a close (0.28 AU, at the closest perihelion) vantage point, achieving increasing out-of-ecliptic views with the increase of the orbit inclination over time. Moreover, observations near perihelion, during the phase of lower rotational velocity of the solar surface relative to the spacecraft, allow longer-term studies of the off-limb coronal features, thus finally disentangling their intrinsic evolution from effects due to solar rotation. Methods. Thanks to a novel occultation design and a combination of a UV interference coating of the mirrors and a spectral bandpass filter, Metis images the solar corona simultaneously in the visible light band, between 580 and 640 nm, and in the UV H <ns0:sc>I</ns0:sc> Lyman-α line at 121.6 nm. The visible light channel also includes a broadband polarimeter able to observe the linearly polarised component of the K corona. The coronal images in both the UV H <ns0:sc>I</ns0:sc> Lyman-α and polarised visible light are obtained at high spatial resolution with a spatial scale down to about 2000 km and 15 000 km at perihelion, in the cases of the visible and UV light, respectively. A temporal resolution down to 1 s can be achieved when observing coronal fluctuations in visible light. Results. The Metis measurements, obtained from different latitudes, will allow for complete characterisation of the main physical parameters and dynamics of the electron and neutral hydrogen/proton plasma components of the corona in the region where the solar wind undergoes the acceleration process and where the onset and initial propagation of coronal mass ejections (CMEs) take place. The near-Sun multi-wavelength coronal imaging performed with Metis, combined with the unique opportunities offered by the Solar Orbiter mission, can effectively address crucial issues of solar physics such as: the origin and heating/acceleration of the fast and slow solar wind streams; the origin, acceleration, and transport of the solar energetic particles; and the transient ejection of coronal mass and its evolution in the inner heliosphere, thus significantly improving our understanding of the region connecting the Sun to the heliosphere and of the processes generating and driving the solar wind and coronal mass ejections. Conclusions. This paper presents the scientific objectives and requirements, the overall optical design of the Metis instrument, the thermo-mechanical design, and the processing and power unit; reports on the results of the campaigns dedicated to integration, alignment, and tests, and to the characterisation of the instrument performance; describes the operation concept, data handling, and software tools; and, finally, the diagnostic techniques to be applied to the data, as well as a brief description of the expected scientific products. The performance of the instrument measured during calibrations ensures that the scientific objectives of Metis can be pursued with success.
BibTeX
@inproceedings{antonucci2020metis,
  author = {E. Antonucci and M. Romoli and V. Andretta and Silvano Fineschi and P. Heinzel and J. D. Moses and G. Naletto and G. Nicolini and D. Spadaro and L. Teriaca and A. Berlicki and Gerardo Capobianco and Giuseppe Crescenzio and Vania Da Deppo and Mauro Focardi and Fabio Frassetto and K. Heerlein and Federico Landini and Enrico Magli and Andrea Marco Malvezzi and G. Massone and Radek Melich and P. Nicolosi and G. Noci and M. Pancrazzi and Maria Guglielmina Pelizzo and Luca Poletto and C. Sasso and U. Schühle and S. K. Solanki and L. Strachan and Roberto Susino and Giuseppe Tondello and M. Uslenghi and J. Woch and L. Abbo and А. Бемпорад and Marta Casti and S. Dolei and C. Grimani and M. Messerotti and M. Ricci and T. Straus and Daniele Telloni and Paola Zuppella and F. Auchère and R. Bruno and A. Ciaravella and Alain Jody Corso and Miguel Alvarez Copano and R. Aznar Cuadrado and R. D’Amicis and R. Enge and Alessio Gravina and S. Jejčič and P. Lamy and A. C. Lanzafame and Thimo Meierdierks and Ioanna Papagiannaki and Hardi Peter and G. Fernández-Rico and Mewael Sertsu and J. Staub and K. Tsinganos and M. Velli and R. Ventura and Enrico Verroi and J. C. Vial and S. Vivès and A. Volpicelli and Stephan Werner and Andreas Zerr and Barbara Negri and Marco Castronuovo and Alessandro Gabrielli and Roberto Bertacin and Rita Carpentiero and Silvia Natalucci and F. Marliani and Marco Cesa and Philippe Laget and Danilo Morea and Stefano Pieraccini and P. G. Radaelli and Paolo Sandri and Paolo Sarra and Stefano Cesare and Felice Del Forno and Ernesto Massa and Mauro Montabone and Sergio Mottini and Daniele Quattropani and Tiziano Schillaci and Roberto Boccardo and Rosario Brando and Arianna Pandi and Cristian Baietto and S. Bertone and A. Álvarez‐Herrero and P. García Parejo},
  title = {{Metis: the Solar Orbiter visible light and ultraviolet coronal imager}},
  booktitle = {Springer Link (Chiba Institute of Technology)},
  year = {2020},
  doi = {10.1051/0004-6361/201935338/pdf},
}
Figure