Meta-DSP: A Meta-Learning Approach for Data-Driven Nonlinear Compensation in High-Speed Optical Fiber Systems

Xinyu Xiao, Zhennan Zhou, Bin Dong, Dingjiong Ma, Li Zhou, Jie SunJournal of Lightwave Technology 2025 · OpenReview

TL;DR

This paper introduces Meta-DSP, a novel meta-learning-based approach for compensating nonlinear effects in high-speed optical fiber systems. Meta-DSP significantly improves generalization across different transmission rates and channel configurations without requiring retraining, offering a scalable and computationally efficient solution for dynamic optical networks.

What Problem Does This Paper Address?

High-speed optical fiber communication systems are crucial for modern data transmission, but their capacity is fundamentally limited by nonlinear effects within the fiber. While Digital Backward Propagation (DBP) is effective at mitigating these issues, its computational complexity is prohibitive for practical implementation. Existing data-driven solutions, like Filtered DBP (FDBP), reduce complexity but suffer from a critical lack of generalization. This means that an FDBP model trained for a specific transmission rate or number of channels cannot be directly applied to different settings without extensive retraining, making them unsuitable for dynamic network environments. The paper aims to bridge this gap by developing a system that can adapt to various transmission parameters without the need for re-training.

Methods

The proposed solution, Meta-DSP, is a two-module pipeline:

  • Meta-DBP: This module leverages meta-learning, specifically a hypernetwork, to generate the necessary parameters (N-filter) for nonlinear compensation. The hypernetwork learns a mapping from task-specific information (like symbol rate and filter length) to the N-filter weights. This allows Meta-DBP to infer the correct compensation parameters for new scenarios quickly, rather than retraining from scratch. It builds upon the Filtered DBP (FDBP) concept by replacing the static filter with a dynamically generated one.
  • XPM-ADF: This module is an adaptive filter designed to specifically address Cross-Phase Modulation (XPM) noise, which arises from inter-channel nonlinear interactions. It combines a Finite Impulse Response (FIR) filter with a single-tap phase estimator, updated using the Normalized Least Mean Squares (NLMS) algorithm, to effectively capture and mitigate XPM.

Datasets

The models were trained and evaluated using simulated optical fiber transmission data. Specifically, Meta-DBP was initially trained on 40 Gbaud, single-channel data. The performance was then tested across various scenarios, including higher symbol rates (80/160 Gbaud) and multi-channel configurations (up to 21 channels). The paper does not explicitly mention newly introduced benchmark datasets, but rather uses simulated data representative of different transmission parameters.

Key Insights and Ideas

  • Meta-learning for Generalization: The core idea is that by learning how to learn compensation parameters (via a hypernetwork), the system can generalize to unseen scenarios much more effectively than traditional data-driven methods.
  • Scaling Transformation for Symbol Rates: The paper identifies that the nonlinear compensation filters (N-filters) for different symbol rates are related by a scaling transformation. This insight is crucial for the hypernetwork's ability to generalize across varying transmission speeds.
  • Decoupling SPM and XPM Compensation: The Meta-DSP architecture effectively separates the compensation of intra-channel nonlinearities (SPM, handled by Meta-DBP) from inter-channel nonlinearities (XPM, handled by XPM-ADF), allowing for specialized and efficient mitigation of each.
  • Computational Efficiency: The meta-learning approach drastically reduces the computational cost during inference, as the hypernetwork can generate parameters very quickly, unlike the time-consuming SGD training required by FDBP for new scenarios.

Key Results

  • Significant Q-factor Improvement: Meta-DSP achieved a Q-factor improvement of 0.55 dB over CDC in challenging scenarios (160 Gbaud, 21 channels) compared to a baseline FDBP trained on 40 Gbaud data. It also closely matched the performance of FDBP trained on the higher 160 Gbaud data.
  • Computational Complexity Reduction: Meta-DSP reduces computational complexity by approximately 10x compared to traditional DBP.
  • Fast Inference: The hypernetwork inference for Meta-DSP is extremely fast, taking less than 0.1 seconds, compared to over 120 seconds for FDBP retraining on a new dataset.
  • Robust Generalization: Meta-DSP demonstrated strong generalization capabilities, successfully applying knowledge learned from 40 Gbaud single-channel data to 80/160 Gbaud and up to 21-channel configurations.

Limitations and Future Work

  • Complexity of Transmission Models: The authors plan to investigate Meta-DSP's performance under more complex transmission models, such as those incorporating Polarization Mode Dispersion (PMD).
  • Higher Optical Power Conditions: Future work will explore the feasibility of Meta-DSP for compensation under stronger optical power conditions.
  • Theoretical Capacity Limits: The research aims to leverage deep learning and data-driven modeling to explore the theoretical capacity limits of nonlinear channels.

Summary updated

Abstract

Nonlinear effects in high-speed optical fiber systems fundamentally limit channel capacity. While traditional Digital Backward Propagation (DBP) with adaptive filters addresses these effects, its computational complexity remains impractical. Data-driven solutions like Filtered DBP (FDBP) reduce complexity but critically lack inherent generalization: Their nonlinear compensation capability cannot be naturally extended to new transmission rates or WDM channel counts without retraining on newly collected data. We propose Meta-DSP, a novel signal processing pipeline combining: (1) Meta-DBP, a meta-learning-based DBP model that generalizes across transmission parameters without retraining, and (2) XPM-ADF, a carefully engineered adaptive filter designed to address multi-channel nonlinear distortions. The system demonstrates strong generalization, learning from 40 Gbaud single-channel data and successfully applying this knowledge to higher rates (80/160 Gbaud) and multi-channel configurations (up to 21 channels). Experimental results show Meta-DSP improves Q-factor by 0.55 dB over CDC in challenging scenarios while reducing computational complexity 10× versus DBP. This work provides a scalable solution for nonlinear compensation in dynamic optical networks, balancing performance with practical computational constraints.
BibTeX
@article{xiao2025meta,
  author = {Xinyu Xiao and Zhennan Zhou and Bin Dong and Dingjiong Ma and Li Zhou and Jie Sun},
  title = {{Meta-DSP: A Meta-Learning Approach for Data-Driven Nonlinear Compensation in High-Speed Optical Fiber Systems}},
  journal = {Journal of Lightwave Technology},
  year = {2025},
  url = {https://openreview.net/forum?id=mrQduIHoLa},
}
Figure