TL;DR
While "negative coal pillar" (NCP) layouts are designed to shield mine roadways from high static stress, dynamic shocks from nearby mining can still trigger catastrophic rockbursts. This paper reveals the mechanics behind these failures and introduces a dual-criterion risk identification model—based on energy and displacement—to predict and prevent these violent events.
What Problem Does This Paper Address?
In deep coal mining, "rockbursts"—the sudden, violent ejection of coal and rock—are a major safety hazard. To combat this, engineers often use a "negative coal pillar" (NCP) arrangement, where roadways are tucked beneath the edge of a previously mined-out area (the gob). This layout typically places the roadway in a low-stress "pressure relief" zone, making it significantly safer than traditional layouts.
However, a major rockburst occurred unexpectedly in an NCP roadway at the Junde Coal Mine during a mining shock event. This incident proved that NCP layouts are not immune to "dynamic load disturbances"—vibrations and pressure waves caused by rock fractures elsewhere in the mine. The authors set out to understand why these supposedly safe zones fail and how to identify when they are at risk.
Methods
The researchers employed a three-pronged approach:
- Field Investigation: They analyzed the "11.14" rockburst event at Junde Coal Mine, documenting damage like hydraulic support failure and roadway deformation.
- Numerical Simulation: Using PFC2D (Particle Flow Code), they created a virtual model of the mine to simulate how individual particles of coal and rock move and interact during a shock. This allowed them to visualize stress waves and energy absorption that are impossible to see in real life.
- Theoretical Modeling: They developed mathematical models based on energy attenuation theory and rock dynamics. These models calculate how much energy a shock wave loses as it travels through different rock layers and whether the remaining energy is enough to "eject" coal into the roadway.
Datasets
The study relies on:
- Field Data: Microseismic monitoring records and borehole data from the Junde Coal Mine (specifically the 17-seam gob-side face).
- Geomechanical Parameters: Laboratory-tested values for rock properties (density, elasticity, friction angles, and cohesion) for various strata like siltstone and coarse-grained sandstone.
- Validation Case: Data from the Huafeng Coal Mine was used to verify the effectiveness of the proposed prevention measures.
Key Insights and Ideas
- The "Double-Exceeded" State: A rockburst occurs when two thresholds are crossed simultaneously: the shock energy exceeds the support system's absorption capacity (Energy Criterion), and the resulting movement exceeds the roadway's structural stability limits (Displacement Criterion).
- The Role of the Plastic Zone: The "broken" or plastic coal surrounding an NCP roadway actually acts as a buffer. If this zone is wide enough, it absorbs the kinetic energy of the shock wave, preventing a burst.
- Shock Path Matters: The researchers identified three main paths for vibration waves: through the roof, the floor, or the coal seam itself. Each path attenuates energy differently, meaning the location of the "source" tremor drastically changes the risk level.
- Quantified Risk: The paper defines specific "danger zones" based on ejection velocity ($v_p$). For instance, if the calculated ejection velocity is $\ge 10$ m/s, a rockburst is considered certain.
Key Results
- Risk Identification Model: The authors proposed a quantitative method to calculate the "Critical Width" of the pressure relief zone. For the Junde case, they calculated that the plastic zone needed to be expanded to at least 21.7 meters to ensure stability.
- Displacement Thresholds: Roadway stability was categorized into three levels: Stable ($u < 50$ mm), Moderately Stable ($50 \le u < 200$ mm), and Unstable ($u \ge 200$ mm).
- Prevention Success: By implementing three targeted measures—quantifying relief zones, optimizing support resistance, and using roof pre-cracking (blasting) to reduce the intensity of tremors—the researchers successfully mitigated rockburst risks in similar geological conditions at the Huafeng Coal Mine.
Limitations and Future Work
The authors acknowledge that while their model is robust, it relies on accurate microseismic data and precise geomechanical parameters, which can vary wildly across different mines. Future work could involve integrating this theoretical model into real-time monitoring software that provides "early warnings" to miners based on live seismic activity. Additionally, the 2D simulation (PFC2D) could be expanded to 3D to better capture the complex, multi-directional nature of stress waves in deep mines.
Summary updated