Mechanism and Characterization of Bicomponent-Filler-Reinforced Natural Rubber Latex Composites: Experiment and Molecular Dynamics (MD)

Zhipeng Feng, Hongzhou Zhu, Bo Hu, Huabin Chen, Yong YanMolecules 2025 · DOI

TL;DR

This paper tackles the challenge of filler agglomeration in natural rubber latex (NR) composites by introducing a dual-component filler system of multi-walled carbon nanotubes (MWCNTs) and silica (SiO₂). The study demonstrates that this combination significantly enhances mechanical properties and improves filler dispersion, validated through both experimental testing and molecular dynamics simulations.

What Problem Does This Paper Address?

Natural rubber latex (NR) is a versatile material used across many industries due to its excellent elasticity. However, its inherent properties limit its application in demanding scenarios. To improve NR, reinforcing fillers like carbon black, carbon nanotubes (CNTs), and silica are often incorporated. A major hurdle in this process is the tendency of these fillers to clump together (agglomerate) within the NR matrix. This agglomeration not only hinders uniform dispersion but also leads to poor mechanical properties and increased brittleness, ultimately limiting the practical applications of NR composites. Existing methods for improving filler dispersion can be complex, inefficient, and environmentally unfriendly. This research aims to overcome these limitations by developing a simpler, more effective approach using a synergistic combination of two different types of fillers.

Methods

The researchers employed a multi-pronged approach combining experimental techniques with computational simulations:

  • Solution Blending: A straightforward method was used to prepare the NR composites. Natural rubber latex was mixed with MWCNTs and SiO₂ in a solvent (THF), followed by the addition of vulcanization agents and subsequent drying and vulcanization.
  • Mechanical Testing: Standard tensile tests were performed to evaluate the tensile strength, elongation at break, and Young's modulus of the prepared composites. Cyclic stress-strain curves were used to assess energy loss and viscoelastic behavior.
  • Dynamic Mechanical Analysis (DMA): This technique was used to study the viscoelastic properties of the composites across a range of temperatures, providing insights into storage modulus, loss modulus, and loss factor.
  • Rubber Process Analyzer (RPA): RPA was utilized to investigate the Payne effect, a phenomenon related to filler dispersion and network structure, by measuring storage modulus and loss factor as a function of strain.
  • Scanning Electron Microscopy (SEM): SEM was employed to visualize the microscopic morphology of the composites, allowing for direct observation of filler dispersion and agglomeration.
  • Molecular Dynamics (MD) Simulations: Using Materials Studio software, MD simulations were performed to model the behavior of the NR composites at the atomic level. Key parameters investigated included:
  • Mean Square Displacement (MSD): To understand the mobility of polymer chains.
  • Fractional Free Volume (FFV): To quantify the available free space for molecular chain movement.
  • Binding Energy: To characterize the strength of interactions between fillers and the NR matrix.

Datasets

Not discussed in the paper. The study relies on experimental data generated from the prepared composite samples and simulated data from molecular dynamics models.

Key Insights and Ideas

  • Synergistic Effect of Dual Fillers: The combination of MWCNTs and SiO₂ exhibits a synergistic effect, meaning their combined performance is greater than the sum of their individual contributions. This synergy is key to overcoming the limitations of single-filler systems.
  • MWCNT-SiO₂ Interaction: The strong adsorption energy of the SiO₂ surface appears to facilitate the attachment of MWCNTs, leading to a more uniform distribution and a synergistic effect that enhances overall performance.
  • Dispersion is King: The improved mechanical properties and reduced Payne effect are directly linked to the enhanced dispersion of the dual-component fillers within the NR matrix. This suggests that achieving good dispersion is paramount for maximizing the benefits of reinforcing fillers.
  • MD as a Predictive Tool: The molecular dynamics simulations provided valuable insights into the microscopic mechanisms underlying the observed macroscopic properties. The agreement between experimental and simulation results validates the predictive power of MD for this class of materials.

Key Results

  • Mechanical Enhancement: The addition of MWCNTs and SiO₂ (MSNR composite) resulted in significant improvements:
  • Tensile strength increased by 56.4%.
  • Elongation at break increased by 72.41%.
  • Young's modulus increased by 34.44%.
  • Reduced Payne Effect: The MSNR composite showed a 4.5% reduction in the Payne effect compared to single-filler composites (MNR and SNR), indicating better filler dispersion.
  • Molecular Dynamics Findings:
    • MSNR exhibited the lowest Mean Square Displacement (MSD) by 21%, suggesting restricted molecular chain movement and better interfacial bonding.
  • Fractional Free Volume (FFV) was reduced by 17.44% in MSNR, further supporting the idea of restricted chain mobility and improved packing.
  • The binding energy of MSNR was 69 times higher (more negative), indicating strong interactions between fillers and the NR matrix.
  • Energy Absorption: The MSNR composite showed the largest hysteresis area in cyclic stress-strain curves, indicating a greater capacity for energy absorption and dissipation, beneficial for vibration and impact damping.

Limitations and Future Work

  • Viscoelasticity and Hysteresis Loss: The authors acknowledge that NR is inherently viscoelastic, leading to hysteresis loss. While the MSNR composite shows improved energy absorption, it also exhibits a weak elastic recovery compared to other composites.
  • Future Work: The researchers plan to focus on reducing the viscoelasticity of NR composites to minimize hysteresis loss in future studies.

This study provides a strong foundation for developing high-performance NR composites by leveraging the synergistic effects of dual-component fillers, with promising applications in areas like high-performance tires, electronics, and high-temperature sealants.

Summary updated

Abstract

The incorporation of reinforcing fillers into natural rubber latex (NR) to achieve superior elasticity and mechanical properties has been widely applied across various fields. However, the tendency of reinforcing fillers to agglomerate within NR limits their potential applications. In this study, multi-walled carbon nanotube (MWCNT)-silica (SiO<sub>2</sub>)/NR composites were prepared using a solution blending method, aiming to enhance the performance of NR composites through the synergistic effects of dual-component fillers. The mechanical properties, dispersion behavior, and Payne effect of three types of composites-SiO<sub>2</sub>/NR (SNR), MWCNT/NR (MNR), and MWCNT-SiO<sub>2</sub>/NR (MSNR)-were investigated. In addition, the mean square displacement (MSD), fractional free volume (FFV), and binding energy of the three composites were simulated using molecular dynamics (MD) models. The results showed that the addition of a two-component filler increased the tensile strength, elongation at break, and Young's modulus of NR composites by 56.4%, 72.41%, and 34.44%, respectively. The Payne effect of MSNR was reduced by 4.5% compared to MNR and SNR. In addition, the MD simulation results showed that the MSD and FFV of MSNR were reduced by 21% and 17.44%, respectively, and the binding energy was increased by 69 times, which was in agreement with the experimental results. The underlying mechanisms between the dual-component fillers were elucidated through dynamic mechanical analysis (DMA), a rubber process analyzer (RPA), and field emission scanning electron microscopy (SEM). This study provides an effective reference for broadening the application fields of NR.
BibTeX
@inproceedings{feng2025mechanism,
  author = {Zhipeng Feng and Hongzhou Zhu and Bo Hu and Huabin Chen and Yong Yan},
  title = {{Mechanism and Characterization of Bicomponent-Filler-Reinforced Natural Rubber Latex Composites: Experiment and Molecular Dynamics (MD)}},
  booktitle = {Molecules},
  year = {2025},
  doi = {10.3390/molecules30020349},
}
Figure