Mechanics and Crack Analysis of Irida Graphene Bilayer Composite: A Molecular Dynamics Study

Jianyu Li, Mingjun Han, Shuai Zhao, Teng Li, Taotao Yu, Yinghe Zhang, Ho-Kin Tang, Qing PengJournal of Composites Science 2023 · DOI

TL;DR

This study uses molecular dynamics simulations to investigate the mechanical properties and fracture behavior of irida graphene (IG) and its composites with graphene. The research reveals that while IG is a promising 2D material, its fracture strength is lower than graphene, but bilayer structures and composites can enhance its mechanical performance, offering insights for advanced nanoelectronic device design.

What Problem Does This Paper Address?

The rapid development of 2D materials, inspired by graphene's exceptional properties, has led to the exploration of novel structures like irida graphene (IG). IG, characterized by its unique 3-6-8 carbon atom fused rings, shows promise for applications in electronics and energy storage due to its excellent conductivity and stability. However, a comprehensive understanding of its mechanical behavior, particularly under stress and in the presence of defects like cracks, is crucial for its practical implementation. This paper aims to fill this gap by systematically analyzing the tensile properties and fracture mechanics of monolayer and bilayer IG, as well as IG-graphene composites, under various conditions, including the presence and orientation of cracks.

Methods

The researchers employed molecular dynamics (MD) simulations as their primary computational tool, utilizing the LAMMPS (large-scale atomic/molecular massively parallel simulator) software. For simulating the interactions between carbon atoms, they used the AIREBO (adaptive intermolecular reactive bond order) force field, which is known to handle significant deformations in carbon nanostructures. To model the interactions between layers in bilayer structures, they employed Lennard-Jones potentials for van der Waals forces.

The study involved creating various simulation models:

  • Monolayer and bilayer graphene (GE)
  • Monolayer and bilayer irida graphene (IG)
  • Composite structures (e.g., graphene/irida graphene bilayers)

Cracks were introduced into these models by removing atoms from the simulation box. The simulations were conducted at a temperature of 300 K with a time step of 0.001 picoseconds (ps). The mechanical properties were analyzed by applying tensile loads and observing the resulting stress-strain relationships. Visualization of simulation results was done using OVITO and VMD.

Datasets

Not discussed in the paper. The study relies on in silico simulations rather than experimental datasets.

Key Insights and Ideas

  • IG's inherent weakness: While IG boasts excellent conductivity and thermal properties, its intrinsic tensile strength is lower than that of pristine graphene. This is attributed to its unique atomic structure and potentially weaker interatomic bonds compared to graphene's hexagonal lattice.
  • Bilayer structures as a solution: The mechanical properties of IG can be significantly enhanced by forming bilayer structures or composites with graphene. The presence of a graphene layer in a GE/IG bilayer acts as a reinforcing substrate, improving both fracture stress and strain.
  • Cracks are detrimental, but orientation matters: The presence of cracks drastically reduces the fracture stress and strain of all studied materials. However, the orientation of the crack relative to the tensile direction plays a critical role. Perpendicular cracks (90° to the tensile direction) are the most damaging, leading to the lowest fracture stress.
  • Angle of attack: As the angle between the crack and the tensile direction increases, the material's tensile strength generally decreases. This suggests that cracks aligned with the tensile direction are less impactful than those perpendicular to it, contrary to initial intuition. The study found that larger angles lead to reduced fracture stress.
  • Bimodal fracture in composites: Bilayer structures, especially composites, exhibit a "bimodal" fracture behavior. This means they don't break all at once but rather layer by layer, leading to a more gradual stress-strain curve with distinct peaks. This behavior is attributed to the differing mechanical properties and breaking points of the individual layers.

Key Results

  • Monolayer comparison: Monolayer graphene exhibits a fracture stress of 90.1 GPa, while monolayer irida graphene has a significantly lower fracture stress of 52.3 GPa.
  • Bilayer comparison: Bilayer graphene (GE/GE) shows a fracture stress of 91.5 GPa, while bilayer irida graphene (IG/IG) has a fracture stress of 51.4 GPa. The GE/IG composite structure achieves a fracture stress of 67.3 GPa.
  • Crack length impact: For monolayer graphene and IG, a crack length of 25 Å reduced fracture stress by approximately three times compared to the uncracked state.
  • Crack orientation impact: The study found that cracks oriented at 75° to the tensile direction resulted in the lowest stress and strain across all structures. Perpendicular cracks (90°) were also found to be highly detrimental.
  • Bilayer fracture mechanism: Bilayer graphene and IG structures fracture layer by layer, unlike monolayer structures which fracture more simultaneously.

Limitations and Future Work

The authors acknowledge that their study focuses solely on mechanical properties. They suggest that future research should incorporate thermal properties, as well as the influence of temperature, pressure, and strain rate, which are crucial factors in real-world applications. Additionally, while the study provides valuable insights into crack behavior, further investigation into optimizing crack mitigation strategies and understanding the long-term durability of these materials under various environmental conditions would be beneficial. The authors also note that while the angle between cracks and the tensile direction affects tensile strength, excessively large angles should be avoided in practical applications to prevent premature failure.

Summary updated

Abstract

In this paper, we conducted molecular dynamics simulations to investigate the mechanical properties of double-layer and monolayer irida graphene (IG) structures and the influence of cracks on them. IG, a new two-dimensional material comprising fused rings of 3-6-8 carbon atoms, exhibits exceptional electrical and thermal conductivity, alongside robust structural stability. We found the fracture stress of the irida graphene structure on graphene sheet exceeds that of the structure comprising solely irida graphene. Additionally, the fracture stress of bilayer graphene significantly surpasses that of bilayer irida graphene. We performed crack analysis in both IG and graphene and observed that perpendicular cracks aligned with the tensile direction result in decreased fracture stress as the crack length increases. Moreover, we found that larger angles in relation to the tensile direction lead to reduced fracture stress. Across all structures, 75° demonstrated the lowest stress and strain. These results offer valuable implications for utilizing bilayer and monolayer IG in the development of advanced nanoscale electronic devices.
BibTeX
@article{li2023mechanics,
  author = {Jianyu Li and Mingjun Han and Shuai Zhao and Teng Li and Taotao Yu and Yinghe Zhang and Ho-Kin Tang and Qing Peng},
  title = {{Mechanics and Crack Analysis of Irida Graphene Bilayer Composite: A Molecular Dynamics Study}},
  journal = {Journal of Composites Science},
  year = {2023},
  doi = {10.3390/jcs7120490},
}
Figure