Measuring Small Longitudinal Phase Shifts via Weak Measurement Amplification

Kai Xu, Xiao‐Min Hu, Chao ZHang, Bi‐Heng Liu, Yun-Feng Huang, Chuan‐Feng Li, Guang‐Can Guo, Mengjun Hu, Yong-Sheng ZhangarXiv 2018 · DOI · arXiv

TL;DR

Researchers have developed a novel "Weak Measurement Phase Amplification" (WMPA) scheme that boosts ultra-small longitudinal phase shifts by an order of magnitude. By mapping a tiny phase signal onto the polarization state of a photon and using post-selection, they demonstrated a practical, robust method for high-precision interferometry that could improve technologies like gravitational wave detection.

What Problem Does This Paper Address?

In precision metrology, measuring "longitudinal phase shifts"—tiny changes in the phase of a wave along its direction of travel—is fundamental to detecting everything from gravitational waves to biological molecules. While standard interferometry is powerful, it often hits a "precision floor" due to technical noise or the limits of detector resolution.

Weak Measurement Amplification (WMA) has emerged as a way to "zoom in" on tiny signals by using a quantum mechanical trick: weakly coupling a system to a "pointer" and then performing a very specific, rare measurement (post-selection). However, previous WMA schemes for phase measurement were often impractical, requiring perfectly shaped laser pulses (Gaussian distributions) or complex detection in the time/frequency domain. This paper addresses the need for a simpler, more robust WMA protocol suitable for standard polarization-based interferometry.

Methods

The authors propose a scheme called Weak Measurements Amplification Based Phase Measurement (WMPA). Unlike standard Weak Value Amplification (WVA), which relies on a linear approximation, this method uses a non-linear magnification approach.

  1. System and Pointer: They use a single photon where the path (which way it goes) is the "system" and its polarization (horizontal vs. vertical) is the "pointer."
  2. The Interaction: The photon passes through a Liquid Crystal Variable Retarder (LCVR), which introduces an ultra-small phase shift ($\theta$) between the polarization states.
  3. Post-selection: The "magic" happens here. They set up the interferometer so that only photons in a very specific path state are detected. This post-selection is designed to be nearly orthogonal to the initial state.
  4. Amplification: Because the post-selection is so restrictive, the small phase $\theta$ is mathematically "pushed" into a much larger rotation ($\kappa$) of the polarization state on the Bloch sphere.
  5. Extraction: The amplified phase $\kappa$ is then easily measured using standard polarization optics (Half-Wave Plates and Polarizing Beam Splitters).

Datasets

As this is an experimental physics paper, the "datasets" consist of primary experimental measurements:

  • Phase Calibration: Measurements of the LCVR's phase shift vs. applied voltage to establish a baseline.
  • Amplification Data: Comparisons between the input ultra-small phase ($\theta$) and the measured amplified phase ($\kappa$) across different magnification factors (3x, 5x, and 10x).
  • Visibility Tests: Data confirming the system's performance under finite interference visibility (approx. 0.997).

Key Insights and Ideas

  • Non-linear Magnification: Most WVA experiments rely on a linear regime where the "weak value" is a constant. This paper shows that by embracing the non-linear regime of the interaction, they can achieve stable amplification without a "definite" weak value.
  • Robustness to Visibility: One of the biggest hurdles in interferometry is "visibility"—how clear the interference fringes are. The authors demonstrate that their WMPA protocol is remarkably robust against the finite visibility typically found in real-world labs.
  • The "Micrometer" Analogy: They liken their protocol to a mechanical micrometer, which transforms a tiny linear displacement into a large, readable rotation of a dial. Here, the "dial" is the photon's polarization.

Key Results

  • 10x Amplification: The team successfully demonstrated a one-order-of-magnitude amplification of phase signals.
  • Precision Range: They measured ultra-small phases in the range of 0.03 rad to 0.1 rad.
  • Sensitivity Boost: The theoretical precision of the phase estimation was improved by the amplification factor ($h$). For example, with a 10x boost, the sensitivity to the phase signal $\theta$ is significantly enhanced compared to conventional methods when technical noise is the limiting factor.
  • Experimental Validation: The measured data (dots on their graphs) matched the theoretical predictions (lines) with high fidelity, proving the reliability of the non-linear WMPA model.

Limitations and Future Work

  • The Post-selection Tax: Like all weak measurement schemes, WMPA works by throwing away the vast majority of photons. This means that while the signal is amplified, the signal-to-noise ratio (SNR) only improves if the dominant noise is "technical" (like jitter or electronic noise) rather than "fundamental" (shot noise).
  • Quantum Noise: The authors acknowledge that if an experiment is strictly limited by quantum shot noise, WMA cannot outperform conventional interferometry. However, they note that for most practical applications, technical noise is the real enemy, making WMPA a valuable tool.
  • Future Directions: The authors suggest that combining this technique with quantum resources like squeezed light or entanglement could eventually allow measurements to reach the Heisenberg limit, the theoretical maximum precision allowed by physics.

Summary updated

Abstract

Weak measurement amplification, which is considered as a very promising scheme in precision measurement, has been applied to various small physical quantities estimation. Since many quantities can be converted to phase signal, it is thus interesting and important to consider measuring ultra-small longitudinal phase shifts by using weak measurement. Here, we propose and experimentally demonstrate a novel weak measurement amplification based ultra-small longitudinal phase estimation, which is suitable for polarization interferometry. We realize one order of magnitude amplification measurement of small phase signal directly introduced by Liquid Crystal Variable Retarder and show its robust to finite visibility of interference. Our results may find important applications in high-precision measurements, such as gravitational waves detection.
BibTeX
@misc{xu2018measuring,
  author = {Kai Xu and Xiao‐Min Hu and Chao ZHang and Bi‐Heng Liu and Yun-Feng Huang and Chuan‐Feng Li and Guang‐Can Guo and Mengjun Hu and Yong-Sheng Zhang},
  title = {{Measuring Small Longitudinal Phase Shifts via Weak Measurement Amplification}},
  year = {2018},
  eprint = {1803.07746},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/1803.07746},
}

Loading related content...

Figure