Measurement of the total cross section of uranium-uranium collisions at<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:msqrt><mml:msub><mml:mi>s</mml:mi><mml:mrow><mml:mi>N</mml:mi><mml:mi>N</mml:mi></mml:mrow></mml:msub></mml:msqrt><mml:mo>=</mml:mo><mml:mn>192.8</mml:mn></mml:mrow></mml:math>GeV

W. Fischer, A. J. Baltz, M. Blaskiewicz, D. Gassner, K. A. Drees, Y. Luo, M. Minty, P. Thieberger, M. Wilinski, I. PshenichnovPhysical 2014 · DOI · arXiv

Abstract

Heavy ion cross sections totaling several hundred barns have been calculated previously for the Relativistic Heavy Ion Collider (RHIC) and the Large Hadron Collider (LHC). These total cross sections are more than an order of magnitude larger than the geometric ion-ion cross sections primarily due to bound-free pair production (BFPP) and electromagnetic dissociation (EMD). Apart from a general interest in verifying the calculations experimentally, an accurate prediction of the losses created in the heavy ion collisions is of practical interest for the LHC, where some collision products are lost in cryogenically cooled magnets and have the potential to quench these magnets. In the 2012 RHIC run uranium ions collided with each other at $\sqrt{s_{NN}}=192.8$ GeV with nearly all beam losses due to collisions. This allows for the measurement of the total cross section, which agrees with the calculated cross section within the experimental error.

Introduction

When heavy ions like uranium (U) or lead (Pb) collide at relativistic speeds, their intense electromagnetic fields interact even during ultra-peripheral collisions where the nuclei do not physically overlap. These interactions trigger two primary non-nuclear processes: Bound-Free Pair Production (BFPP) and Electro-Magnetic Dissociation (EMD). In BFPP, an electron-positron pair is created, and the electron is captured by one of the ions, altering its charge. In EMD, a nucleus absorbs a photon from the opposing ion's field and emits a neutron, changing its mass.

Both processes alter the ion's charge-to-mass ratio, causing it to deviate from the stable beam orbit. In high-luminosity accelerators like the LHC, these lost ions can strike superconducting magnets, potentially causing a "quench"—a sudden loss of superconductivity that halts operations. This study utilizes the 2012 uranium run at RHIC to experimentally verify theoretical calculations of these cross sections.

Experimental Methodology

The researchers employed a "burn-off" measurement technique. By monitoring the rate at which particles disappear from the beam ($dN/dt$) relative to the luminosity ($L$), the total cross section ($\sigma$) can be determined using the relation: $$\sigma = \frac{-dN/dt}{L}$$

To ensure high precision, the team utilized 3D stochastic cooling, a novel feedback system that counteracts natural beam spread. This system ensures that beam losses are almost exclusively due to collisions ("luminous loss") rather than background processes like scattering off residual gas. Data was analyzed from 60 physics stores, focusing on the final 50 stores where machine stability was optimal and 3D cooling was fully operational. Approximately 554,000 data points were processed using Parametric Current Transformers (PCTs) for intensity monitoring and Zero Degree Calorimeters (ZDCs) for luminosity measurement.

Results and Comparison

The measured total cross section for U+U collisions at 192.8 GeV was found to be $515 \pm 13_{stat} \pm 22_{sys}$ barn. This result is more than 60 times larger than the geometric "nuclear" cross section of approximately 8 barns, confirming that over 98% of beam loss is driven by electromagnetic interactions.

Theoretical cross section calculations for various heavy-ion species at RHIC and LHC.

As shown in the table above, the calculated total cross section for U+U is 487.3 barn, dominated by BFPP (329 b) and single EMD (150.1 b). The experimental measurement is approximately 5.4% higher than this calculation but remains within the combined experimental error margin of roughly 5%.

Discussion

The extraction of the cross section relies on the linear relationship between the beam loss rate and the total luminosity. By plotting these variables, the slope provides a direct measurement of the cross section.

Linear fit of beam loss rate versus luminosity for the Blue and Yellow beams.

The prolate ("football") shape of the uranium nucleus adds complexity to the EMD calculations, specifically regarding the radius ($R_U$) used in the models. Despite these complexities, the agreement between the experimental data and theoretical predictions validates the current understanding of electromagnetic processes in heavy-ion colliders.

Conclusion

This measurement confirms that electromagnetic processes are the dominant source of beam loss in high-energy heavy-ion collisions. The results provide a critical benchmark for predicting beam-induced heat loads in superconducting magnets at facilities like the LHC. Future refinements, including more precise measurements of residual gas composition, will further reduce systematic uncertainties and improve the predictive power of these electromagnetic models.

Summary updated

Abstract

Heavy ion cross sections totaling several hundred barns have been calculated previously for the Relativistic Heavy Ion Collider (RHIC) and the Large Hadron Collider (LHC). These total cross sections are more than an order of magnitude larger than the geometric ion-ion cross sections primarily due to bound-free pair production (BFPP) and electromagnetic dissociation (EMD). Apart from a general interest in verifying the calculations experimentally, an accurate prediction of the losses created in the heavy ion collisions is of practical interest for the LHC, where some collision products are lost in cryogenically cooled magnets and have the potential to quench these magnets. In the 2012 RHIC run uranium ions collided with each other at $\sqrt{{s}_{NN}}=192.8$ GeV with nearly all beam losses due to collisions. This allows for the measurement of the total cross section, which agrees with the calculated cross section within the experimental error.
BibTeX
@inproceedings{fischer2014measurement,
  author = {W. Fischer and A. J. Baltz and M. Blaskiewicz and D. Gassner and K. A. Drees and Y. Luo and M. Minty and P. Thieberger and M. Wilinski and I. Pshenichnov},
  title = {{Measurement of the total cross section of uranium-uranium collisions at<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:msqrt><mml:msub><mml:mi>s</mml:mi><mml:mrow><mml:mi>N</mml:mi><mml:mi>N</mml:mi></mml:mrow></mml:msub></mml:msqrt><mml:mo>=</mml:mo><mml:mn>192.8</mml:mn></mml:mrow></mml:math>GeV}},
  booktitle = {Physical},
  year = {2014},
  doi = {10.1103/physrevc.89.014906},
}

Loading related content...

Figure