Abstract
The DArk Matter Particle Explorer (DAMPE), a space-based high energy particle detector, has been operated on-orbit for more than five years. The large geometric factor and good charge resolution enable DAMPE to have very good potential to measure cosmic-rays up to 100 TeV. Knowledge of the boron to carbon (B/C) flux ratio is very important in understanding the propagation of cosmic rays, especially in TeV energy range. In this contribution, the latest progress of the B/C flux ratio analysis based on the flight data collected by DAMPE during the 5 years of operation, is presented.
Introduction
Understanding the propagation of cosmic rays (CRs) through the galaxy is fundamental to modern astrophysics. CRs are generally classified into two groups: primaries, such as Carbon (C) and Oxygen (O), which are accelerated at astrophysical sources like supernova remnants; and secondaries, such as Boron (B), which are produced through the fragmentation of heavier primary nuclei during their journey through the interstellar medium (ISM).
The Boron-to-Carbon (B/C) flux ratio serves as a "standard candle" for cosmic ray propagation models. Since Boron is almost exclusively a secondary product, the B/C ratio directly reflects the amount of material traversed by cosmic rays. Current diffusion models, often based on Kolmogorov turbulence theory, predict specific power-law behaviors for this ratio. While magnetic spectrometers like AMS-02 have provided high-precision data at lower energies, their measurement uncertainties increase significantly in the TeV range. The DAMPE experiment aims to extend these measurements into the multi-TeV regime using a calorimetric approach.
The DAMPE Experiment and Methodology
The DArk Matter Particle Explorer (DAMPE) is a high-energy satellite-borne detector designed for the study of cosmic rays and gamma rays. Unlike magnetic spectrometers that measure rigidity, DAMPE utilizes a deep BGO (Bismuth Germanate) imaging calorimeter (32 radiation lengths) to measure the energy of incident particles directly.
Key sub-detectors include:
- Plastic Scintillator strip Detector (PSD): Essential for charge identification ($|Z|$), allowing for the separation of Boron ($Z=5$) from Carbon ($Z=6$).
- Silicon-Tungsten Tracker (STK): Provides precise trajectory reconstruction and an independent charge measurement.
- BGO Imaging Calorimeter: Measures the energy deposited by hadronic and electromagnetic showers.
- Neutron Detector (NUD): Aids in the discrimination between hadronic nuclei and electromagnetic backgrounds.
Data Analysis
The analysis is based on five years of on-orbit data collected between January 1, 2016, and December 31, 2020, totaling approximately 1.2 × 10⁸ seconds of live time. To account for the fact that hadronic showers are not fully contained within the 1.6 nuclear interaction lengths of the BGO calorimeter, a Bayesian unfolding method was applied to reconstruct the incident energy from the deposited energy.
Charge resolution is a critical factor in this analysis. By combining measurements from the PSD and STK, the collaboration achieved high-purity samples. As shown in the charge distribution plots, the separation between Boron and Carbon is distinct, with contamination levels for Boron kept below 2% for energies under 300 GeV.
Results and Discussion
The DAMPE collaboration has successfully measured the B/C flux ratio from 15 GeV/n up to 3 TeV/n. The results demonstrate a continuous decrease in the ratio with increasing energy, consistent with standard diffusion models.
Crucially, the DAMPE data shows excellent agreement with previous measurements from AMS-02 and PAMELA in the overlapping energy regions. This cross-instrument consistency validates the energy unfolding and charge identification techniques used by the DAMPE team. At the highest energies reached (near 3 TeV/n), the data points follow the extrapolated power laws from lower energies, suggesting that the underlying diffusion mechanisms remain stable into the TeV regime.
Conclusion and Future Outlook
These preliminary results from DAMPE represent a significant step in extending B/C ratio measurements into the high-energy frontier. While statistical uncertainties increase at the multi-TeV scale due to the rapidly falling cosmic ray flux, the calorimetric approach of DAMPE provides a robust alternative to magnetic spectrometers.
Future work will focus on refining systematic uncertainty estimates, particularly regarding helium background at very high energies. Continued data collection will further improve the precision of these measurements, potentially uncovering new spectral features in the propagation of cosmic rays that are currently hidden by statistical noise.
Summary updated