Abstract
Storage phosphors displaying defect emission are indispensable in technologically advanced radiation dosimeters. The current dosimeter is limited to the passive detection mode, where ionizing radiation-induced deep-trap defects must be activated by external stimulations, such as ultraviolet light or heat. Herein, we designed a new type of shallow-trap storage phosphor by controlling the dopant amounts of Ag<sup>+</sup> and Bi<sup>3+</sup> in the host lattice of Cs<sub>2</sub>NaInCl<sub>6</sub>. A distinct phenomenon of X-ray-induced emission (XIE) is observed for the first time in an intrinsically nonemissive perovskite. The intensity of XIE exhibits a quantitative relationship with the accumulated dose, enabling a real-time radiation dosimeter. Thermoluminescence and in situ X-ray photoelectron spectroscopy verify that the emission originates from radiative recombination of electrons and holes associated with X-ray-induced traps. Theoretical calculations reveal the evolution process of Cl-Cl dimers serving as hole trap states. Analysis of temperature-dependent radioluminescence spectra provides evidence that the intrinsic electron-phonon interaction in 0.005Ag<sup>+</sup>@Cs<sub>2</sub>NaInCl<sub>6</sub> is significantly reduced under X-ray irradiation. Moreover, 0.025Bi<sup>3+</sup>@Cs<sub>2</sub>NaInCl<sub>6</sub> shows an elevated sensitivity to the accumulated dose with a broad response range from 0.08 Gy to 45.05 Gy. This work discloses defect manipulation in halide double perovskites, giving rise to distinct shallow-trap storage phosphors that bridge traditional deep-trap storage phosphors and scintillators and enabling a brand-new type of materials for real-time radiation dosimetry.
Introduction
Radiation dosimetry—measuring the absorbed dose of ionizing radiation—is critical for medical safety, nuclear energy, and space exploration. Currently, the field relies heavily on "passive" dosimeters. These devices utilize storage phosphors with "deep traps" that capture charge carriers (electrons and holes) generated by radiation. Because these carriers are effectively stuck, the data must be retrieved later via external stimulation like heat (thermoluminescence) or light (optically stimulated luminescence) in a laboratory setting. This lag time means radiation exposure is only known after the fact.
To address this, researchers have engineered a new type of "shallow-trap" storage phosphor using doped halide double perovskites ($Cs_2NaInCl_6$). Unlike traditional dosimeters, these materials enable real-time monitoring by translating accumulated radiation directly into measurable light emission at room temperature, bridging the gap between passive storage phosphors and active scintillators.
Methods
The study focused on the lead-free halide double perovskite $Cs_2NaInCl_6$, which is intrinsically non-emissive due to parity-forbidden electronic transitions. The research team employed several key techniques:
- Doping and Synthesis: Trace amounts of Silver ($Ag^+$) and Bismuth ($Bi^{3+}$) were introduced into the host lattice using hydrothermal methods to manipulate the trap states.
- Characterization: X-ray excited radioluminescence (RL) was used to observe the material's glow under irradiation. Thermoluminescence (TL) measured the depth of energy traps, while in situ X-ray Photoelectron Spectroscopy (XPS) tracked electron transfer during exposure.
- Theoretical Modeling: Density Functional Theory (DFT) calculations simulated the formation of $Cl-Cl$ dimers (known as $V_k$ centers), which serve as the primary hole traps in the lattice.
Results and Material Classification
The experimental results demonstrated that the optical properties of the perovskites are highly dependent on the dopant concentration. By carefully controlling these levels, the researchers could transition the material from a non-emissive state to a storage phosphor or a scintillator.
As shown in Table 1, the $0.005Ag^+$-doped and $0.025Bi^{3+}$-doped versions function as storage phosphors that exhibit RL enhancement with dose accumulation—a key requirement for real-time dosimetry. In contrast, higher dopant concentrations (e.g., $Cs_2Na_{0.5}Ag_{0.5}InCl_6$) result in standard scintillators that do not show this dose-dependent enhancement.
Key Insights
- Shallow vs. Deep Traps: The breakthrough involved engineering trap depths to approximately 0.5 eV. This "shallow" depth allows charge carriers to spontaneously recombine at room temperature, creating a steady X-ray induced emission (XIE) proportional to the total dose received.
- Lattice Softening: X-ray irradiation was found to significantly reduce the Huang-Rhys factor (S) from ~80 to ~11. This reduction in electron-phonon coupling "softens" the lattice, facilitating radiative transitions that are normally forbidden in the host material.
- The $V_k$ Center Mechanism: The study identified that X-rays cause $Cl^-$ ions to dislocate and form $Cl_2^-$ dimers ($V_k$ centers). These dimers act as hole traps, while the $Ag^+$ or $Bi^{3+}$ dopants facilitate electron trapping, enabling light-producing recombination.
Performance and Stability
The $0.025Bi^{3+}$-doped version demonstrated superior performance, offering a broad linear-like response range from 0.08 Gy to 45.05 Gy. Additionally, the materials showed excellent cycling stability, allowing them to be "reset" and reused. The Bi-doped crystals also exhibited a visible afterglow for over 60 seconds after the X-ray source was deactivated, confirming the spontaneous release of carriers from shallow traps.
Conclusion and Future Outlook
This work introduces a novel class of materials for active radiation monitoring. While the current results are promising, challenges remain regarding saturation limits at very high doses and the precision required during dopant synthesis. Future research will focus on extending the detection range and integrating these crystals into wearable electronic sensors or thin-film coatings for practical, real-world applications in medical and industrial environments.
Summary updated