Macro- and Micro-Characteristics and Mechanical Properties of Xigeda Formation Claystone in Luding County, Western Sichuan, China

Ruian Wu, Xiang Li, Changbao Guo, Jiawei Ni, Yang Wang, Deguang Song, Chang QiSustainability 2023 · DOI

TL;DR

This study investigates the engineering geological properties of the Xigeda Formation claystone in Luding County, China, revealing distinct macro- and micro-characteristics between yellow and gray claystone layers. The research highlights the significant impact of moisture content on the claystone's mechanical properties, particularly its reduced strength when wet, which has critical implications for geological hazard assessment and infrastructure development in the region.

What Problem Does This Paper Address?

The Xigeda Formation, a prevalent geological unit in southwestern China, is classified as hard soil or soft rock. While its engineering geological characteristics are crucial for infrastructure projects and understanding geological hazards, there's a need for detailed characterization, especially concerning its response to environmental factors like moisture. Previous research has indicated that this formation is generally stable under natural conditions but highly susceptible to water, leading to a significant decrease in mechanical strength. This paper aims to provide a comprehensive understanding of the Xigeda Formation claystone in Luding County by examining its material composition, microstructure, and mechanical behavior under varying moisture conditions, thereby addressing the knowledge gap regarding its specific engineering properties and water sensitivity in this particular region.

Methods

The researchers employed a multi-faceted approach to characterize the Xigeda Formation claystone:

  • X-ray Diffraction (XRD): Used to determine the mineral composition of the claystone samples, identifying key minerals and their proportions.
  • Scanning Electron Microscopy (SEM): Employed to visualize and analyze the microstructure of the claystone, revealing details about particle arrangement, pore structure, and cementation.
  • In-situ Permeability Tests (Double-Ring Infiltration Test): Conducted in the field to measure the permeability coefficient of the claystone in its natural state.
  • Laboratory Mechanical Tests (Triaxial Tests): Performed on remolded samples to assess the shear strength, cohesion, and internal friction angle under various moisture content and confining pressure conditions.

Datasets

Not discussed in the paper. The study relies on experimental data collected from field samples.

Key Insights and Ideas

  • Yellow vs. Gray Claystone Distinction: The study reveals that while both yellow and gray claystones share similar mineral compositions (primarily quartz and clay minerals, with illite being dominant), they differ significantly in their microstructure and density. Yellow claystone exhibits higher density and stronger cementation due to a higher proportion of clay minerals and lower calcite content, suggesting more intense weathering and depositional conditions.
  • Water Sensitivity is Paramount: The most striking finding is the pronounced weakening of the claystone's mechanical properties, particularly cohesion, when exposed to increased moisture. This sensitivity is significantly higher in the Luding County region compared to other areas where the Xigeda Formation is found.
  • Microstructure Dictates Behavior: The SEM analysis provides a visual link between microstructure and mechanical properties. The denser, more cemented structure of yellow claystone contributes to its higher initial strength, while the disruption of this cementation by water leads to a drastic reduction in cohesion.
  • Permeability is Higher Than Expected: The in-situ permeability of the Xigeda Formation claystone in Luding County is found to be in the medium range (3.62 × 10⁻⁴ to 7.34 × 10⁻⁴ cm/s), which is higher than that reported for claystone in other regions. This is attributed to the low degree of diagenesis and intact nature of the formation in this specific area.

Key Results

  • Mineral Composition: Both yellow and gray claystones are rich in quartz and clay minerals, with illite being the dominant clay mineral. Yellow claystone has a higher clay mineral content (12% more) and lower calcite content compared to gray claystone.
  • Microstructure: Yellow claystone shows a denser microstructure with more conspicuous cementation between clay minerals, while gray claystone is looser with thinner and more scattered clay minerals.
  • Permeability: The average permeability coefficient for the Xigeda Formation claystone in Luding County is 5.11 × 10⁻⁴ cm/s, classifying it as medium permeable.
  • Mechanical Properties:
    • Cohesion: Decreases significantly with increasing moisture content for both yellow and gray claystones. For example, yellow claystone's cohesion dropped from 121.12 kPa to 18.54 kPa as moisture increased from 20% to saturation (30.93%).
  • Internal Friction Angle: Generally increases with increasing moisture content, particularly for yellow claystone, which saw a 28.7% rise from 22.62° to 29.12° as moisture content went from 20% to saturation. Gray claystone showed a less consistent trend.
  • Water Sensitivity: The claystone in Luding County exhibits the most significant susceptibility to moisture content changes, leading to a pronounced weakening of mechanical properties.

Limitations and Future Work

  • Remolded Samples: The study utilized remolded samples for triaxial tests due to the disturbed nature of the collected soil mass. This might not perfectly replicate the in-situ behavior of the intact claystone.
  • Regional Comparison: While comparisons are made with other regions, the study focuses primarily on the Luding County site. Further research could expand the comparative analysis to a wider range of Xigeda Formation locations.
  • Future Work: The authors suggest that further investigation into the engineering geological characteristics of this unique hard soil and soft rock formation is essential. This includes continued research on its properties and the development of effective strategies for geological hazard prevention and mitigation, especially considering its high water sensitivity.

Summary updated

Abstract

Claystone is actually a type of hard soil or soft rock. To reveal the engineering geological characteristics of the Xigeda formation claystone in Luding County (Western Sichuan, China), some experiments, including X-ray diffraction (XRD), scanning electron microscopy (SEM), and geotechnical tests, are performed. The testing results indicate that the Xigeda formation claystone primarily consists of silt, clay, and other fine-grained materials. It is characterized by interbedded yellow and gray thin layers with a horizontal lamination structure. The yellow and gray claystones are made of the same materials but differ in their proportions. Additionally, yellow claystone is characterized by a higher density, resulting in enhanced cementation among clay particles. The permeability coefficient of Xigeda formation claystones ranges from 3.62 × 10−4~7.34 × 10−4 cm/s. The cohesion of yellow and gray claystones decreases with increasing moisture content, and the decline is greater at higher moisture contents. However, the relationship between internal friction angle and moisture content is different. The mechanical properties of the Xigeda formation exhibit significant differences in sensitivity to changes in moisture content across various regions. Notably, the claystone within the study region experiences a particularly pronounced weakening of its mechanical properties when exposed to water.
BibTeX
@inproceedings{wu2023macro,
  author = {Ruian Wu and Xiang Li and Changbao Guo and Jiawei Ni and Yang Wang and Deguang Song and Chang Qi},
  title = {{Macro- and Micro-Characteristics and Mechanical Properties of Xigeda Formation Claystone in Luding County, Western Sichuan, China}},
  booktitle = {Sustainability},
  year = {2023},
  doi = {10.3390/su151713274},
}
Figure