Abstract
The Lunar Mineralogical Spectrometer (LMS) is one of the main payloads on the Chang’E-5 (CE-5) lunar probe, belonging to the China Lunar Exploration Program. The scientific objective of the LMS is to explore the mineralogical composition and search for evidence of -OH/H2O in the sampling area. The LMS consists of an optomechanism unit, a dustproof calibration unit (DPCU) and an electronic unit. The LMS is installed on the lander about 1.4-m above the lunar surface, the field of view (FOV) is $4.17\times 4.17^{\circ }$, the instant FOV of the visible imaging channel is 0.28 mrad, and the typical spatial resolution is 0.56 mm/pixel @ 2 m distance. The rotation range of the 2D scanner is $\pm 22.5^{\circ}$ along the azimuth axis and $0\sim 30^{\circ }$ along the elevation axis, making it possible to observe the sampling area or to select important observing targets. The dispersing beam uses acousto-optic tunable filters, and target detection is performed with a 2D scanner. The LMS acquires spectral imaging information covering 480–950 nm, and reflectance spectra of 900–3,200-nm, both at a 5-nm/band sampling interval. The spectral resolution is $2.4\sim 9.4\text{ nm}$ in the visible and near-infrared channels and $7.6\sim 24.9\text{ nm}$ in the short–medium-wave infrared channel. The LMS has a 588-band detection capability designed for fine spectral observation of sampling points and wields a 20-band full-view multi-spectral mode to observe candidate areas prior to sampling. The DPCU of the LMS is integrated with a calibration diffuser that is used for in-flight calibration on the lunar surface using solar irradiation, thus improving the quantitative level of scientific data.
Introduction
While orbital remote sensing has mapped the Moon's surface for decades, a significant "scale gap" often exists between satellite data and the actual composition of the soil on the ground. For the Chang’E-5 (CE-5) sample-return mission, the Lunar Mineralogical Spectrometer (LMS) was developed to provide in-situ mineral identification and search for water/hydroxyl signatures directly at the landing site. This instrument allowed scientists to identify specific minerals like olivine and pyroxene, guiding the robotic arm to select the most scientifically valuable spots for sampling.
Instrument Architecture and Placement
The LMS is an evolutionary advancement over the spectrometers used on the Chang’E-3 and 4 rovers. It is installed on the lander approximately 1.4 meters above the lunar surface, providing a strategic vantage point for observing the sampling area.
The system utilizes Acousto-Optic Tunable Filters (AOTF) for light dispersion. Unlike traditional spectrometers that rely on moving gratings or prisms, AOTFs use ultrasonic waves in a crystal to diffract specific wavelengths. This design makes the instrument compact, robust, and electronically tunable with no internal moving parts for dispersion.
As shown in the architecture diagram, the LMS splits light into two primary channels: a Visible/Near-Infrared (V-NIR) channel (480–1450 nm) and a Short/Medium-Wave Infrared (S-MWIR) channel (1400–3200 nm). To combat the harsh lunar environment where temperatures can exceed 70°C, the LMS employs Thermal-Electric Coolers (TECs) on the detectors and utilizes phase-locked amplification to extract signals from background thermal noise.
Operational Modes and Calibration
The LMS features a 2D scanning mechanism that allows for $\pm 22.5^\circ$ movement in azimuth and $0\sim 30^\circ$ in elevation. This enables two distinct operational modes:
- Full-view Multi-spectral Mode: A 20-band panoramic mosaic used to map candidate areas prior to sampling.
- Full-band Staring Mode: A 588-band high-resolution point spectroscopy mode for deep-dive analysis of specific sampling points.
To ensure data accuracy, the instrument includes a Dustproof Calibration Unit (DPCU). This unit protects the optics from abrasive lunar dust during landing and houses a calibration diffuser. This allows for "in-flight" radiometric calibration using actual sunlight, achieving an inversion uncertainty of less than 6% for 98% of the spectral bands.
Key Results and Future Outlook
The LMS successfully identified the presence of pyroxene and plagioclase at the Mons Rümker landing site in Oceanus Procellarum. It achieved a spatial resolution of 0.56 mm/pixel at a 2-meter distance, allowing for the analysis of individual small rocks and soil patches. Despite the extreme thermal conditions, the instrument maintained a signal-to-noise ratio (S/N) greater than 100 in the infrared band.
While some higher uncertainty was noted at the extreme edges of the spectral range (near 480 nm and 2500 nm), the LMS technology has proven to be a successful baseline for future exploration. These technologies are slated for application in the Chang’E-6 mission (lunar far-side sample return) and the Chang’E-7/8 missions, which will focus on permanent lunar exploration and resource utilization.
Summary updated