TL;DR
This paper presents the first monolithic integration of a refractive microlens on a surface-micromachined plate that stands perpendicular to the substrate. This novel approach overcomes limitations of previous diffractive microlenses, offering improved efficiency and wavelength independence for free-space micro-optical systems.
What Problem Does This Paper Address?
The integration of micro-optical components into free-space systems is crucial for applications like optical data storage, sensing, and communication networks. A key challenge has been effectively interfacing these components, which often require beams to travel parallel to the substrate, with other surface-micromachined elements. Previous solutions for micro-lenses, such as mounting them directly onto or etching them into the substrate, had limitations. Diffractive Fresnel lenses, while functional, suffered from low diffraction efficiency and were wavelength-specific. This paper addresses the need for a high-performance, easily manufacturable, out-of-plane refractive microlens that can be precisely positioned perpendicular to the substrate, enabling more robust and versatile micro-optical benches.
Methods
The fabrication process involves a two-step approach:
- Surface Micromachining: A supporting plate structure is created using standard surface micromachining techniques. This involves depositing alternating layers of polysilicon and phospho-silicate glass (PSG). The PSG acts as a sacrificial mold, and is later removed using hydrofluoric acid (HF) to release the polysilicon structures. The design incorporates integrated micro-spring latches and side-latches to hold the support plate perpendicular to the substrate at a precise 90° angle.
- Microlens Fabrication: A refractive microlens is formed by reflowing AZ 4620 photoresist. Two layers of photoresist are spun onto the chip to achieve a thickness of up to 20 µm. Photolithography defines a 300 µm diameter circle. After exposure and development, the resulting photoresist cylinder is heated in an oven (200 °F for 20 minutes). Surface tension forces cause the photoresist to reflow into a spherical shape. The AZ 4620 resist's resistance to spreading during reflow is highlighted as an advantage.
After fabrication, the structure is released in HF and manually assembled.
Datasets
Not discussed in the paper. The paper focuses on the fabrication and characterization of a single device.
Key Insights and Ideas
- Monolithic Integration: The core innovation is the ability to monolithically integrate a refractive microlens onto a micromachined plate that stands perpendicular to the substrate. This simplifies assembly and improves robustness.
- Reflowed Photoresist for Lenses: Using reflowed photoresist is a cost-effective and relatively simple method for creating spherical microlenses, offering an alternative to more complex diffractive optics.
- Perpendicular Mounting: The design's ability to precisely position the lens perpendicular to the substrate is critical for aligning with beams traveling parallel to the substrate, a common requirement in micro-optical systems.
- Improved Efficiency and Wavelength Independence: Compared to diffractive Fresnel lenses, refractive microlenses offer higher efficiency and are not wavelength-dependent, broadening their applicability.
- Aberrations from Etch Holes: The presence of etch holes in the support plate, while beneficial for the release process, can introduce aberrations on the bottom surface of the lens, slightly degrading performance. This is noted as an area for improvement.
Key Results
- Spherical Surface Profile: Profilometer scans confirmed a spherical surface with a radius of curvature of 432 µm. The lens surface was spherical to within 0.5 µm over a central radius of 110 µm.
- Absorption Coefficient: The absorption coefficient of AZ 4620 photoresist at 633 nm was measured to be α = 0.0122 µm⁻¹ (or 0.0532 dB/µm).
- Optical Loss: Estimated optical loss through the lens was 0.72 dB (approximately 15% intensity loss).
- Focal Length: The calculated focal length was 699 µm. Experimental measurement yielded a focal length of 637 µm.
- Collimation Performance: The collimated beam divergence angle was 0.18°, a significant improvement over the 3.30° divergence of the fiber alone.
- Focal Spot Size: The measured FWHM focal spot size was 2.2 µm, compared to a theoretical diffraction-limited spot size of 1.3 µm.
Limitations and Future Work
- Etch Holes: The presence of etch holes under the lens surface is a limitation that causes aberrations and degrades performance. Future work could involve designing the support plate to avoid these holes under the lens area.
- Photoresist Reflow Constant (β): The accuracy of the focal length calculation depends on the precise determination of the constant (β) that accounts for volume loss during photoresist reflow. This constant can be problematic to measure accurately due to solvent evaporation.
- Assembly: The current assembly process is manual, which can be time-consuming and limit scalability. Future work could explore automated assembly techniques.
- Wavelength Dependence of Fresnel Lenses: While refractive lenses are wavelength-independent, the paper notes that Fresnel-plate lenses have advantages like no post-processing and greater control over focal length during design. This suggests a trade-off between efficiency/versatility and fabrication simplicity.
- Applications: The paper suggests future applications in free-space optical interconnects, optical switches, and optical storage systems, implying that further development and integration into these systems are logical next steps.
Summary updated