Low-Voltage Analog Switch in Deep Submicron CMOS: Design Technique and Experimental Measurements

Mohamad Sawan, Fieee, Frsc, Fcae, Feic, O.q., Christian Jesús B. Fayomi, Mohamad Sawan, Gordon W. RobertsIEICE Trans. Fundam. Electron. Commun. Comput. sci 2006 · DOI

TL;DR

This paper presents a novel low-voltage, low-stress CMOS analog switch design that utilizes a bootstrapped technique and a new clock voltage doubler. The key innovation is a dummy compensated bootstrapped switch that significantly reduces charge injection and maintains a nearly constant ON-resistance, making it suitable for advanced low-voltage ADCs.

What Problem Does This Paper Address?

As integrated circuits move towards lower supply voltages (deep submicron CMOS), designing high-performance analog components like sample-and-hold circuits becomes increasingly challenging. The limited headroom in low-voltage systems severely impacts dynamic range, linearity, and speed. Specifically, analog switches, crucial for sample-and-hold circuits, suffer from imperfections like charge injection and clock feedthrough. These issues degrade accuracy, especially in high-precision applications. Traditional methods to mitigate these problems often introduce complexity or compromise performance. Furthermore, the shrinking oxide thickness in advanced CMOS processes leads to higher electric fields, posing reliability concerns for bootstrapped circuits that rely on voltage boosting. This paper aims to address these challenges by proposing a reliable, low-voltage, and low-stress analog switch design.

Methods

The core of the proposed design is a bootstrapped analog switch, a technique known for enabling rail-to-rail switching in low-voltage scenarios. The authors introduce a novel low-voltage and low-stress CMOS clock voltage doubler circuit. This doubler is crucial for generating the necessary boosted voltage for the bootstrapped switch without exceeding the device's reliability limits, especially as oxide thicknesses decrease.

A key improvement over standard bootstrapped switches is the incorporation of a dummy transistor. This dummy switch is strategically placed to absorb charge injection, a major source of error. The paper also emphasizes the importance of a constant ON-resistance for predictable performance. The design utilizes a pMOS transistor as the pass device, which offers advantages in terms of relatively constant conductance and channel charge, and can operate at supply voltages close to its threshold voltage.

For improved reliability, particularly concerning drain-to-substrate and source-to-substrate voltages that can exceed VDD in n-well processes, the authors propose a circular or "doughnut" layout for critical devices. This layout helps to increase the breakdown voltage and reduce parasitic capacitance. The paper also delves into the design considerations for the effective W/L ratio of these specialized transistors, deriving equations based on their octagonal shape.

Datasets

Not discussed in the paper. The paper focuses on circuit design and experimental validation using a fabricated test chip.

Key Insights and Ideas

  • Novel Low-Stress Clock Voltage Doubler: The paper introduces a new clock voltage doubler that is not only low-voltage but also designed to minimize stress on the devices, addressing a critical reliability concern in advanced CMOS processes.
  • Dummy Compensation for Reduced Charge Injection: The inclusion of a dummy transistor in the bootstrapped switch architecture is shown to be highly effective in mitigating charge injection errors, leading to improved sample-and-hold accuracy.
  • Constant ON-Resistance: Achieving a nearly constant ON-resistance across a wide range of input voltages is a significant advantage, simplifying circuit analysis and improving linearity.
  • "Doughnut" Layout for Reliability: The proposed circular or "doughnut" layout for critical transistors significantly enhances reliability by increasing breakdown voltage, a crucial aspect for deep submicron technologies.
  • Suitability for Ultra-Low Voltage Operation: The design demonstrates successful operation at supply voltages as low as 0.65V, making it highly relevant for emerging low-power applications.

Key Results

The paper reports on a test chip fabricated using a TSMC 0.18 µm CMOS process. Experimental results demonstrate:

  • Operation at 0.65V: The circuit successfully operates with a supply voltage as low as 0.65V.
  • Constant ON-Resistance: Measured ON-resistance variations were minimal, for example, a typical variation of 0.0368 kΩ was observed for an input signal varying from 0.125 V to 0.65 V under a 0.65 V supply.
  • Linear Feedthrough Error: The feedthrough error voltage showed an almost linear variation with respect to the analog input.
  • Sample-and-Hold Performance: Waveforms from a sample-and-hold operation at 0.5 MHz sampling speed showed good signal reproduction.
  • SFDR and SNDR: For a 1V supply, the measured SINAD was 71.05 dB (11.5 bits) at 0.25 MHz sampling, and for a 0.65V supply, it was 45.775 dB (7.3 bits). Spurious Free Dynamic Range (SFDR) was also measured and presented for different input levels and sampling frequencies.

Limitations and Future Work

  • Complexity of Design Equations: The authors acknowledge that deriving analytical design equations for the proposed circuit is difficult, and they provide general design guidelines instead.
  • Parasitic Capacitance Impact: While the design aims to minimize errors, the paper notes that parasitic capacitances (junction and backgate) are the major source of distortion, particularly affecting the time constant's signal dependency.
  • Future Work: The paper implicitly suggests that further optimization of the clock booster and dummy compensation scheme could lead to even better performance. The demonstrated reliability improvements through layout techniques also open avenues for further exploration in robust analog design for advanced nodes. The authors highlight the circuit's suitability for high-speed ADCs, implying potential for integration into more complex mixed-signal systems.

Summary updated

BibTeX
@article{oq2006low,
  author = {Mohamad Sawan, FIEEE, FRSC, FCAE, FEIC, O.Q. and Christian Jesús B. Fayomi and Mohamad Sawan and Gordon W. Roberts},
  title = {{Low-Voltage Analog Switch in Deep Submicron CMOS: Design Technique and Experimental Measurements}},
  journal = {IEICE Trans. Fundam. Electron. Commun. Comput. sci},
  year = {2006},
  doi = {10.1093/ietfec/e89-a.4.1076},
}

Loading related content...

Figure