Low-Profile Ultrawideband Hybrid Absorber Using Carbon-Magnetic Material With Enhanced Absorption
Lists
Only you see this
Abstract
In this letter, a low-profile ultra-wideband hybrid absorber (HA) is proposed with enhanced absorption efficiency of 97% in X-band and Ku-band based on stepimpedance matching method. The proposed HA integrates multi-layer graphene-based structure (MGBS) and magnetic material (MM) with stacked step-impedance substrate in an optimized configuration. The impedance calculations show that the step-impedance substrate significantly broadens the conditions for the proposed HA to achieve -15 dB reflectivity. Simulation results indicate that the reflectivity of the designed HA is less than -10 dB in the range of 0.75 ∼ 20 GHz and enhanced to -15 dB across 8 ∼ 20 GHz with a relative bandwidth of 185.5% and a thickness of 0.055 λL at the lowest operating frequency. Meanwhile, the oblique incidence response reaches 30° for TE mode and 60° for TM mode. Finally, a prototype is fabricated and measured results are consistent with the simulation results.
BibTeX
@article{liu2025low,
author = {Ran Liu and Bian Wu and Jiancheng Lv and Lei Wang and Ding Zhang and Yutong Zhao and Tao Su},
title = {{Low-Profile Ultrawideband Hybrid Absorber Using Carbon-Magnetic Material With Enhanced Absorption}},
journal = {IEEE Antennas and Wireless Propagation Letters},
year = {2025},
doi = {10.1109/lawp.2025.3593786},
}Loading related content...