TL;DR
This paper presents a novel, simplified fabrication process for ultra-deep mesa silicon avalanche photodiodes (Si-APDs). By reducing photolithography steps and employing low-energy ion implantation, they achieve improved performance, lower cost, and faster fabrication times, making Si-APDs more accessible for applications like LiDAR and single-photon detection.
What Problem Does This Paper Address?
Silicon avalanche photodiodes (Si-APDs) are crucial components in various applications requiring sensitive light detection, such as medical imaging, robotics, and optical communication. Their internal amplification mechanism allows them to detect even faint light signals. While silicon APDs are attractive due to their low cost and compatibility with CMOS technology, traditional fabrication processes are often complex, time-consuming, and expensive, involving numerous photolithography and ion implantation steps. This complexity hinders their widespread adoption and limits their cost-effectiveness, especially for high-volume applications. The authors aim to address this by developing an "ultra-concise" fabrication process that significantly reduces steps and costs while maintaining or improving performance.
Methods
The core innovation lies in an "ultra-concise" fabrication process for deep-mesa Si-APDs. Key aspects include:
- Reduced Photolithography Steps: The process significantly cuts down the number of photolithography steps, reportedly by at least half compared to existing methods.
- Low-Energy Ion Implantation: Instead of multiple high-energy ion implantation steps, the authors employ a single, low-energy phosphorus implantation (below 30 keV) to form the p-n junction. This reduces fabrication costs and complexity.
- Ultra-Deep Mesa Etching: A deep mesa structure, approximately 107 µm deep, is etched using inductively coupled plasma (ICP) etching. This deep structure is crucial for the device's performance.
- Streamlined Passivation and Metallization: The process includes optimized steps for mesa sidewall passivation (using SiO2) and the deposition of Ti/Au alloy for electrical contacts.
The device architecture utilizes a traditional separate absorption and multiplication (SAM) structure, with an epi-absorption layer (A-layer) and an epi-multiplication layer (M-layer) grown via CVD.
Datasets
Not discussed in the paper. The paper focuses on the fabrication and characterization of a specific device, not on training or evaluating models on large datasets.
Key Insights and Ideas
- Simplification Drives Cost Reduction: The most significant insight is that simplifying the fabrication process, particularly by reducing photolithography and using low-energy ion implantation, directly translates to lower manufacturing costs and shorter fabrication times.
- Deep Mesa for Performance: The ultra-deep mesa structure, while challenging to fabricate, is key to achieving high breakdown voltage and good performance characteristics.
- Low-Energy Implantation is Sufficient: The study demonstrates that a single, low-energy ion implantation step can effectively form the necessary p-n junction for high-performance APDs, challenging the need for multiple, high-energy steps in traditional processes.
- Trade-offs in Etching: While the deep mesa etching is effective, it introduces challenges like sidewall roughness and requires high etching uniformity, highlighting areas for future improvement.
Key Results
The fabricated ultra-deep mesa Si-APD exhibits several impressive performance metrics:
- Breakdown Voltage: 140 V
- Dark Current: Below 1 nA at punch-through voltage.
- Maximum Gain: Exceeds 1000 at 95% breakdown voltage.
- Responsivity: A peak responsivity of 103 A/W at 870 nm was achieved at 120 V bias.
- Capacitance: Low capacitance of 500 fF at punch-through voltage.
- Response Time: A rapid optical pulse response time shorter than 2.7 ns at 55 V reverse voltage.
- Linear Dynamic Range: Favorable linearity from 1 to 100 gain, making it suitable for LiDAR.
Limitations and Future Work
The authors acknowledge the following limitations and suggest future directions:
- Sidewall Roughness and Defects: The etching process for the deep mesa can lead to sidewall roughness and defects. The dry oxidation time was not long enough to completely suppress these, contributing to a dark current that did not reach the absolute desired minimum.
- Etching Uniformity: The long etching time required for the deep mesa necessitates high uniformity and repeatability in the etching process, which is a challenge.
- Further Optimization: Future work will focus on resolving the issues related to sidewall roughness and defects, optimizing etching processes, and exploring further performance enhancements.
- Response Time at Different Bias Voltages: The current study was limited in measuring the device rise time at various bias voltages and plans to conduct these measurements in the future.
Summary updated