Low dielectric resins derived from hyperbranched carbosilane oligmers functionalized by benzocyclobutene groups

Xian Li, Yawen Huang, Xu Ye, Quan Long, Wen Yuan, Fan Li, Qiuxia Peng, Jiajun Ma, Junxiao YangDesigned 2021 · DOI

TL;DR

Researchers have developed novel hyperbranched carbosilane oligomers functionalized with benzocyclobutene (BCB) groups. These new materials, when thermally cured, form transparent resins with exceptionally low dielectric constants (k ≈ 2.72) and high thermal stability, making them promising candidates for advanced microelectronic applications.

What Problem Does This Paper Address?

The relentless miniaturization of electronic devices, particularly in integrated circuits (ICs) and high-frequency applications like microwave transmission, demands materials with increasingly lower dielectric constants (low-k materials). A low dielectric constant is crucial for reducing signal delay, power consumption, and crosstalk between conductive pathways. While various low-k polymers like epoxy resins, polyimides, and silicon resins have been explored, there's a continuous need for materials that offer a superior balance of low dielectric performance, high thermal stability, and good processability. Polycarbosilanes, with their Si-C backbone, are inherently good candidates due to the low polarity of Si-C bonds. However, achieving a desirable combination of low-k, thermal stability, and mechanical integrity often requires careful molecular design and synthesis. This paper addresses this by functionalizing hyperbranched carbosilane oligomers with benzocyclobutene (BCB) groups, aiming to leverage the benefits of both structures for high-performance low-k resins.

Methods

The researchers synthesized novel hyperbranched carbosilane oligomers (HCBOs) using a Grignard coupling reaction. Chloromethyltrichlorosilane was reacted with magnesium to form an intermediate, which then underwent coupling with itself to create the branched carbosilane backbone. Subsequently, 4-bromobenzocyclobutene was introduced via a Grignard reagent to functionalize the HCBOs with BCB groups.

The characterization of these HCBOs and their cured resins (HCBRs) involved a suite of standard analytical techniques:

  • FTIR Spectroscopy: To confirm the presence of functional groups and monitor the ring-opening of BCB during curing.
  • NMR Spectroscopy (¹H and ¹³C): To elucidate the chemical structure and confirm the successful incorporation of BCB units.
  • Differential Scanning Calorimetry (DSC): To study the thermal curing behavior and identify the ring-opening temperature of the BCB groups.
  • Thermogravimetric Analysis (TGA): To assess the thermal stability of the cured resins.
  • Nanoindentation: To evaluate the mechanical properties, specifically hardness and elastic modulus.
  • White Light Interferometry: To analyze the surface morphology and roughness of the films.
  • Impedance Measurements: To determine the dielectric constant and dielectric loss at various frequencies.
  • X-ray Photoelectron Spectroscopy (XPS): To analyze the elemental composition and chemical states of the cured materials.

The curing process involved a multi-step thermal treatment under a nitrogen atmosphere, starting at 180°C and gradually increasing to 250°C.

Datasets

Not discussed in the paper. The study focuses on the synthesis and characterization of novel materials, rather than training or evaluating models on existing datasets.

Key Insights and Ideas

  • Synergistic Combination: The paper demonstrates that combining hyperbranched carbosilane structures with benzocyclobutene functionalization is an effective strategy for developing high-performance low-k materials. The hyperbranched structure contributes to free volume, while the BCB groups enable efficient thermal cross-linking.
  • BCB as a Thermal Cross-linker: The BCB moiety acts as a crucial cross-linking agent upon thermal treatment. Its ring-opening reaction at elevated temperatures leads to the formation of a highly cross-linked, rigid network, which is essential for achieving high thermal stability and good mechanical properties.
  • Enhanced Processability: Unlike some hyperbranched polymers that suffer from poor film-forming properties, these HCBOs are soluble in common organic solvents and can be easily spin-coated into films, indicating good processability for applications like thin-film dielectrics.
  • Low Dielectric Constant Mechanism: The low dielectric constant is attributed to the low polarity of Si-C bonds, the amorphous nature of the cured polymer, and the increased free volume resulting from the hyperbranched structure and BCB ring-opening.

Key Results

  • Low Dielectric Constant: The cured HCBOs (HCBRs) exhibit a dielectric constant of approximately 2.72 at 10 MHz, which is lower than many commonly used low-k polymers.
  • High Thermal Stability: The cured resins show excellent thermal stability, with a T₅% (temperature at which 5% weight loss occurs) of 458.1°C and a char yield of 61.2% at 800°C in a nitrogen atmosphere.
  • Mechanical Properties: The HCBRs possess good mechanical properties, with an average modulus of 7.1 GPa and an average hardness of 0.64 GPa, suggesting suitability for demanding applications.
  • Good Film Formation: The HCBO films exhibit good film formation and retention properties, with an average surface roughness (Ra) of 16.3 nm and root-mean-square deviation (Sq) of 76.7 nm.
  • Successful Synthesis and Curing: The synthesis of HCBOs was confirmed by NMR, and FTIR and DSC studies confirmed the successful thermal curing via BCB ring-opening.

Limitations and Future Work

  • Moisture Sensitivity: While not explicitly stated as a limitation, the paper notes that Si-C bonds can be susceptible to hydrolysis, and Si-O bonds may form during thermal curing, leading to the presence of oxygen in the XPS analysis. This suggests potential for moisture absorption, which can negatively impact dielectric properties. Future work could focus on further enhancing moisture resistance.
  • Comparison with Other BCB Resins: While a comparison table (Table 2) is provided, further in-depth comparative studies with other state-of-the-art low-k materials, especially those with similar BCB functionalities, would be beneficial.
  • Application-Specific Optimization: The paper suggests potential applications in IC encapsulation and laminated matrix resins. Further research could focus on tailoring the properties of these HCBOs for specific application requirements, such as photopatternability or improved adhesion.
  • Detailed Curing Mechanism: While a schematic is provided, a more detailed mechanistic study of the Diels-Alder reaction and subsequent cross-linking could offer deeper insights.

Summary updated

Abstract

Polycarbosilanes have been considered as potential materials used in electronic packaging and circuit boards owing to their excellent low-dielectric performance. In this work, we prepared new hyperbranched carbosilane oligomers (HCBOs) which were functionalized by benzocyclobutene (BCB) groups. HCBOs can be thermally cured to produce transparent (HCBRs) with low dielectric constant and high thermostability.
BibTeX
@inproceedings{li2021low,
  author = {Xian Li and Yawen Huang and Xu Ye and Quan Long and Wen Yuan and Fan Li and Qiuxia Peng and Jiajun Ma and Junxiao Yang},
  title = {{Low dielectric resins derived from hyperbranched carbosilane oligmers functionalized by benzocyclobutene groups}},
  booktitle = {Designed},
  year = {2021},
  doi = {10.1080/15685551.2021.2003556},
}
Figure