Low-Cost Wireless Temperature Measurement: Design, Manufacture, and Testing of a PCB-Based Wireless Passive Temperature Sensor

Dan Yan, Yong Yang, Ying-ping Hong, Ting Liang, Zong Yao, Xiaoyong Chen, Jijun Xiong2018 · DOI

TL;DR

This paper introduces a novel, low-cost wireless passive temperature sensor built entirely from standard Printed Circuit Board (PCB) materials. By leveraging the temperature-dependent dielectric properties of the PCB substrate, the sensor offers a simple, integrated solution for temperature monitoring in various applications, demonstrating good linearity and repeatability across a wide temperature range.

What Problem Does This Paper Address?

Accurate and affordable temperature monitoring is crucial across numerous industries, from food logistics and agriculture to healthcare and everyday devices. Existing temperature sensing solutions often suffer from high costs, complex integration, and the need for wired connections, which limits their applicability in many scenarios, especially for mobile or embedded systems. While wireless passive sensors exist, they often rely on specialized materials or complex fabrication processes, hindering their widespread adoption. This paper aims to bridge this gap by developing a temperature sensor that is not only wireless and passive but also cost-effective and easily manufacturable using standard PCB technology.

Methods

The core of the proposed sensor is a microwave patch antenna integrated onto a PCB substrate. The temperature sensing mechanism relies on the change in the dielectric constant of the PCB material with temperature. This change alters the resonant frequency of the patch antenna.

The design process involved:

  • Theoretical Design: Deriving equations to model the resonant frequency of the patch antenna based on its physical dimensions and the dielectric properties of the substrate.
  • Parameter Analysis: Investigating the influence of physical parameters like patch length and width on the resonant frequency.
  • Software Simulation: Utilizing High Frequency Structure Simulator (HFSS) to optimize the sensor's design for improved radiation efficiency and reduced transmission loss. This included simulating the electric field distribution to understand the radiation mechanism.
  • Fabrication: Manufacturing the sensor using standard PCB fabrication processes, selecting FR4 as the substrate material due to its cost-effectiveness, suitable dielectric properties, and thermal expansion matching with copper.
  • Experimental Testing: Setting up both high-temperature and low-temperature testing systems to evaluate the sensor's performance. This involved using a vector network analyzer to measure the sensor's return loss and resonant frequency across a wide temperature range.

Datasets

Not discussed in the paper. The paper focuses on the design, fabrication, and experimental testing of a single sensor prototype.

Key Insights and Ideas

  • PCB as a Sensing Element: The paper demonstrates that standard PCB materials, specifically the dielectric substrate, can be effectively utilized as the sensing element for temperature measurement, eliminating the need for specialized sensing materials.
  • Simplicity and Integration: The design leverages the inherent properties of PCB manufacturing to create a sensor that is mechanically simple, easy to integrate with other electronic circuits, and cost-effective.
  • Temperature-Dependent Dielectric Constant: The fundamental principle relies on the well-established fact that the dielectric constant of materials changes with temperature, and this change is effectively translated into a measurable shift in the sensor's resonant frequency.
  • Humidity Influence: A significant finding is the noticeable impact of humidity on the sensor's resonant frequency, which can even outweigh the temperature effect under certain conditions. This highlights a crucial consideration for real-world deployment.
  • Sensitivity Discrepancy: The measured sensitivity of the sensor was significantly higher than the theoretically predicted value, attributed to the combined effects of temperature and absorbed moisture.

Key Results

  • Wide Temperature Range: The sensor was tested and performed well across a broad temperature range of -40 °C to 125 °C.
  • Resonant Frequency Shift: The resonant frequency decreased from 2.434 GHz to 2.379 GHz as the temperature increased from -40 °C to 125 °C.
  • Good Linearity: The fitting curve of resonant frequency versus temperature showed good linearity (R² = 0.97489) over the entire test range.
  • Repeatability: Three repeated tests confirmed the sensor's good repeatability.
  • Average Sensitivity: The average sensitivity measured was 347.45 KHz/°C, which is considerably higher than the theoretical prediction of 156.8 KHz/°C.
  • Low-Cost and Compact: The fabricated sensor has a compact size of 56.2 mm × 70 mm × 1.6 mm and is made from low-cost PCB materials.

Limitations and Future Work

  • Humidity Sensitivity: The paper acknowledges that humidity significantly affects the sensor's performance. While the study investigates this influence, further work is needed to mitigate or compensate for humidity variations to ensure accurate temperature readings in diverse environmental conditions.
  • Measurement Range Improvement: The authors suggest improving the measurement range of the sensor, possibly by ameliorating the test system and designing a high-gain broadband interrogation antenna.
  • Theoretical vs. Experimental Discrepancy: The significant difference between the measured and theoretical sensitivity warrants further investigation to fully understand and potentially harness this effect.

Summary updated

BibTeX
@misc{yan2018low,
  author = {Dan Yan and Yong Yang and Ying-ping Hong and Ting Liang and Zong Yao and Xiaoyong Chen and Jijun Xiong},
  title = {{Low-Cost Wireless Temperature Measurement: Design, Manufacture, and Testing of a PCB-Based Wireless Passive Temperature Sensor}},
  year = {2018},
  doi = {10.3390/s18020532},
}

Loading related content...

Figure