LOW COST MULTI-SENSOR ROBOT LASER SCANNING SYSTEM AND ITSACCURACY INVESTIGATIONS FOR INDOOR MAPPING APPLICATION

C. Chen, Xu Zou, Min Tian, J. Li, Weitong Wu, Yi-Zhe Song, Wei Dai, Bisheng Yang2017 · DOI

Abstract

In order to solve the automation of 3D indoor mapping task, a low cost multi-sensor robot laser scanning system is proposed in this paper. The multiple-sensor robot laser scanning system includes a panorama camera, a laser scanner, and an inertial measurement unit and etc., which are calibrated and synchronized together to achieve simultaneously collection of 3D indoor data. Experiments are undertaken in a typical indoor scene and the data generated by the proposed system are compared with ground truth data collected by a TLS scanner showing an accuracy of 99.2% below 0.25 meter, which explains the applicability and precision of the system in indoor mapping applications.

Introduction

While outdoor mapping has been revolutionized by GPS and high-end mobile mapping systems, indoor environments remain a significant challenge. Traditional methods like Terrestrial Laser Scanning (TLS) provide incredible accuracy but are labor-intensive, requiring a human to manually move and register the scanner at multiple locations. Existing "unmanned" solutions are often prohibitively expensive or rely on manual operation. This research aims to bridge this gap by creating a fully autonomous, low-cost robot capable of real-time 3D indoor mapping for applications like Building Information Modeling (BIM), indoor navigation, and virtual reality.

System Design and Methodology

The researchers developed a custom robot built on a two-wheel differential chassis. The hardware stack is designed to balance cost and performance, utilizing an Intel NUC for processing and the Robot Operating System (ROS) for control.

The multi-sensor robot hardware configuration including LiDAR, IMU, and panoramic camera.

Hardware Components:

  • Velodyne VLP-16: A 16-line LiDAR for laser scanning.
  • Xsens MTi-300AHRS: A high-precision MEMS-based Inertial Measurement Unit (IMU).
  • DETU F4: A high-resolution panoramic camera for visual data.

6-DOF Pose Estimation Strategy

The core technical challenge is estimating the robot's 6 Degrees of Freedom (6 DOF) pose—position ($x, y, z$) and orientation (roll, pitch, yaw)—in real-time. Instead of computationally heavy 3D SLAM, the system uses a hybrid approach:

  1. 2D SLAM (GMapping): LiDAR data and the GMapping algorithm solve for the 2D position ($x, y$) and yaw.
  2. IMU Integration: The IMU provides roll and pitch angles.
  3. Geometric Derivation: Since the scanner is at a fixed height, the final $z$ coordinate is calculated by combining the known mechanical height with the IMU orientation data.

Experimental Evaluation

The system was tested in a real-world indoor environment consisting of multiple rooms and a long corridor. To evaluate accuracy, a ground truth dataset was established using a professional-grade Riegl VZ-400 Terrestrial Laser Scanner. The resulting scans were manually registered to create a high-density, high-precision reference point cloud.

Comparison between point clouds collected by the professional TLS (top) and the proposed low-cost robot system (bottom).

Key Results and Insights

The system was evaluated using a point-to-plane distance formula to compare the robot's output against the TLS ground truth.

  • High Accuracy: 99.2288% of the points in the robot-generated cloud fell within 0.225 meters of the reference data.
  • Efficiency: The paper demonstrates that full 3D SLAM is not always necessary for indoor mapping. Combining 2D SLAM with a reliable IMU is a computationally efficient way to generate high-quality 3D data.
  • Viability of Low-Cost Hardware: By using a 16-beam LiDAR, the authors proved that a budget-conscious hardware stack can meet professional accuracy requirements for many applications like floor plan generation.

Limitations and Future Work

While the results are promising, the authors noted several areas for improvement. The VLP-16 provides a relatively sparse cloud compared to static scanners, making it less suitable for high-detail architectural preservation. Future work will focus on automated calibration routines, investigating offline scan matching algorithms to further refine pose estimation, and improving stability to handle more rugged or uneven indoor terrain.

Summary updated

Abstract

In order to solve the automation of 3D indoor mapping task, a low cost multi-sensor robot laser scanning system is proposed in this paper. The multiple-sensor robot laser scanning system includes a panorama camera, a laser scanner, and an inertial measurement unit and etc., which are calibrated and synchronized together to achieve simultaneously collection of 3D indoor data. Experiments are undertaken in a typical indoor scene and the data generated by the proposed system are compared with ground truth data collected by a TLS scanner showing an accuracy of 99.2% below 0.25 meter, which explains the applicability and precision of the system in indoor mapping applications.
BibTeX
@inproceedings{chen2017low,
  author = {C. Chen and Xu Zou and Min Tian and J. Li and Weitong Wu and Yi-Zhe Song and Wei Dai and Bisheng Yang},
  title = {{LOW COST MULTI-SENSOR ROBOT LASER SCANNING SYSTEM AND ITSACCURACY INVESTIGATIONS FOR INDOOR MAPPING APPLICATION}},
  booktitle = {˜The},
  year = {2017},
  doi = {10.5194/isprs-archives-xlii-2-w8-83-2017},
}
Figure