Low-cost LiFePO4using Fe metal precursor
Lists
Only you see this
Abstract
A nano-LiFePO4 possessing a plate-shaped morphology was synthesized by the solvothermal process using low-cost Fe metal powder as the starting precursor at a moderate temperature of around 230 °C under high pressure. Field-emission scanning electron microscopy (FE-SEM) images revealed the average thickness, length and width of the nanoplates to be 20, 100 and 100 nm respectively. The nanoplate-LiFePO4 delivered specific discharge capacities of 171 mA h g−1 with impressive cycle performance until 150 cycles and high rate capabilities as capacities of 125 mA h g−1 was achieved at elevated C-rates of 16 C. Field-emission transmission electron microscopy (FE-TEM) confirmed the growth of the nanoplates along the [010] and [101] crystallographic directions. Solid state 7Li magic angle spinning nuclear magnetic resonance study suggests progressive Li-ion intercalation/de-intercalation along a specific crystallographic direction and appears to support the domino-cascade model. Extended X-ray absorption fine structure spectroscopy (EXAFS) studies indicated a flexible LiFePO4 nanostructure due to the reconstruction of crystals' surface and thereby realize enhanced capacities. We believe that the strategy to adopt Fe-metal precursor in order to obtain such high performing nano-LiFePO4 is very promising for large-scale commercialization from a cost perspective.
BibTeX
@article{kim2011low,
author = {Donghan Kim and Jinsub Lim and Vinod Mathew and Bonil Koo and Younkee Paik and Docheon Ahn and Seung‐Min Paek and Jaekook Kim},
title = {{Low-cost LiFePO<sub>4</sub>using Fe metal precursor}},
journal = {Journal of Materials Chemistry},
year = {2011},
doi = {10.1039/c2jm14499a},
}Loading related content...