Linear optical implementation of perfect discrimination between single-bit unitary operations

Pei Zhang, Peng Liang, Zhiwei Wang, Xi‐Feng Ren, Bi‐Heng Liu, Yun‐Feng Huang, Guang‐Can GuoJournal of Physics B Atomic Molecular and Optical Physics 2008 · DOI · arXiv

Abstract

Discrimination of unitary operations is a fundamental quantum information processing task. Assisted with linear optical elements, we experimentally demonstrate perfect discrimination between single-bit unitary operations using two methods—sequential scheme and parallel scheme. The complexity and resource consumed in these two schemes are analyzed and compared.

Introduction: The Challenge of Quantum Discrimination

In quantum information science, distinguishing between non-orthogonal states or operations with 100% certainty is a significant challenge. If presented with a "black box" containing one of two possible unitary operations, $U$ or $V$, how can one determine which is which?

Early theoretical work suggested that "parallelism"—using multiple entangled qubits and running them through multiple copies of the circuit simultaneously—was necessary for perfect discrimination. However, recent theories propose a sequential scheme, where a single qubit is passed through the same unknown operation multiple times, interspersed with specific "helper" or auxiliary operations.

Conceptual diagrams of the parallel (A) and sequential (B) schemes for unitary discrimination.

Experimental Implementation

The researchers implemented the sequential discrimination scheme using a linear optical setup.

  • Qubit Encoding: The polarization of a single photon (Horizontal $|H\rangle$ and Vertical $|V\rangle$) served as the quantum bit.
  • Optical Gates: Unitary operations ($U, V$) and auxiliary gates ($X$) were realized using Half-Wave Plates (HWP) and Quarter-Wave Plates (QWP) to precisely rotate photon polarization.
  • Sequential Protocol: For a run of $N=2$, a photon is prepared in an initial state, passed through the unknown operation, then an auxiliary gate, and finally the unknown operation again.
  • Detection: A Polarizing Beam Splitter (PBS) and two single-photon detectors ($D_1, D_2$) were used for the final projective measurement.

Key Insights: Entanglement vs. Iteration

The study demonstrates that entanglement is a resource, not a strict requirement, for perfect unitary discrimination. The sequential scheme offers several advantages:

  1. Hardware Simplicity: It eliminates the need for complex multi-qubit entanglement and non-local measurements.
  2. Robustness: By using a single qubit, the system is less sensitive to the environmental decoherence that often affects multi-qubit systems.
  3. Orthogonality through Iteration: Each pass through the unknown operation effectively "stretches" the difference between the potential outcomes until they become orthogonal and thus perfectly distinguishable.

Experimental Results

The team tested the sequential scheme across two different pairs of unitary operations (Case 1 and Case 2). The experimental data showed a high degree of success in distinguishing the operations.

Experimental photon counts for Case 1 and Case 2, demonstrating near-perfect discrimination between detectors D1 and D2.
  • Discrimination Probability: The system achieved success rates between 98.0% and 98.4%, closely matching the theoretical prediction of 100%.
  • Gate Fidelity: Quantum process tomography confirmed that the optical gates operated with high fidelities, ranging from 0.975 to 0.996.
  • Validation: As shown in the results, photons subjected to operation $U$ were almost exclusively detected at $D_1$, while those from $V$ were detected at $D_2$, confirming that the output states were successfully rendered orthogonal.

Limitations and Future Outlook

The ~2% error in discrimination is primarily attributed to the mechanical limits of wave-plate rotation (0.2-degree precision) and minor optical misalignments. As the target operations $U$ and $V$ become more similar, the number of required iterations $N$ increases, which may lead to cumulative errors or photon loss. While the sequential scheme is currently more practical for near-term quantum devices, the parallel scheme remains a viable long-term goal as technologies for large-scale entanglement and non-local measurements mature.

Summary updated

Abstract

Discrimination of unitary operations is a fundamental quantum information processing task. Assisted with linear optical elements, we experimentally demonstrate perfect discrimination between single-bit unitary operations using two methods--sequential scheme and parallel scheme. The complexity and resource consumed in these two schemes are analyzed and compared.
BibTeX
@article{zhang2008linear,
  author = {Pei Zhang and Peng Liang and Zhiwei Wang and Xi‐Feng Ren and Bi‐Heng Liu and Yun‐Feng Huang and Guang‐Can Guo},
  title = {{Linear optical implementation of perfect discrimination between single-bit unitary operations}},
  journal = {Journal of Physics B Atomic Molecular and Optical Physics},
  year = {2008},
  doi = {10.1088/0953-4075/41/19/195501},
}
Figure