Light-driven flow synthesis of acetic acid from methane with chemical looping

Wenqing Zhang, Dawei Xi, Yihong Chen, Aobo Chen, Yawen Jiang, Hengjie Liu, Zeyu Zhou, Hui Zhang, Zhi Liu, Ran Long, Yujie XiongNature Communications 2023 · DOI

TL;DR

Researchers have developed a novel photocatalytic method to directly convert methane (CH4) into acetic acid (CH3COOH) using only light and water, eliminating the need for additional oxidants or reagents. This breakthrough relies on a specially engineered PdO/Pd-WO3 nanocomposite material that facilitates the necessary chemical transformations, achieving impressive efficiency and selectivity in a continuous flow reactor.

What Problem Does This Paper Address?

Methane, a potent greenhouse gas, is an abundant and cheap carbon source. Converting it into valuable chemicals like acetic acid (a key industrial feedstock) is highly desirable for both economic and environmental reasons. Traditional methods for producing acetic acid from methane are often multi-step, energy-intensive, and require additional oxidants (like O2 or H2SO4) or CO, which limits their sustainability and applicability. While photocatalysis offers a greener alternative, directly converting methane to acetic acid photocatalytically has been a significant challenge, primarily due to difficulties in activating methane and controlling the formation and coupling of intermediate species. This paper tackles the problem of achieving a direct, reagent-free, light-driven synthesis of acetic acid from methane.

Methods

The core of this research lies in the design and synthesis of a novel photocatalyst: a PdO/Pd-WO3 heterointerface nanocomposite. The synthesis involves loading palladium nanoparticles (Pd NPs) onto WO3 nanosheets, followed by a controlled thermal annealing process to create PdO species on the Pd NPs. This annealing step is crucial for forming the PdO/Pd heterostructure.

Key techniques employed include:

  • Transmission Electron Microscopy (TEM) and High-Resolution TEM (HRTEM): Used to visualize the morphology, size, and crystal structure of the synthesized nanoparticles and their interfaces. HRTEM was particularly important for identifying the distinct lattice fringes of Pd and PdO, confirming the formation of the heterostructure.
  • X-ray Diffraction (XRD): Used to analyze the crystalline phases present in the materials.
  • X-ray Photoelectron Spectroscopy (XPS): Employed to determine the oxidation states of elements and their surface composition, confirming the presence of Pd and PdO.
  • Electron Energy-Loss Spectroscopy (EELS): Used in conjunction with HAADF-STEM to confirm the elemental composition at the Pd/PdO interface.
  • In situ Diffuse Reflectance-Infrared Fourier-Transform Spectroscopy (DRIFTS): A crucial technique for monitoring the formation of reaction intermediates (like methyl and carbonyl species) on the catalyst surface during the photocatalytic reaction under light irradiation.
  • Near Ambient Pressure X-ray Photoelectron Spectroscopy (NAP-XPS): Used to study surface species under more realistic reaction conditions, providing insights into the evolution of carbon and oxygen species.
  • Gas Chromatography-Mass Spectrometry (GC-MS): Utilized for product analysis, especially for isotopic labeling experiments to trace the origin of oxygen atoms in the acetic acid product.
  • 13C Nuclear Magnetic Resonance (NMR) Spectroscopy: Used to confirm the origin of the carbon in the produced methanol and acetic acid from 13CH4.
  • Photocatalytic Reactor Setup: A custom-designed photochemical flow reactor with an arc-shaped flow channel was developed to enhance the contact between reactants and the catalyst, promoting continuous synthesis.

The novelty lies in the rational design of the PdO/Pd-WO3 heterointerface, which creates specific active sites for methane activation and C-C coupling, and the development of a flow reactor to optimize the reaction kinetics.

Datasets

Not discussed in the paper. The study focuses on experimental synthesis and characterization of a novel catalyst and its performance evaluation in a controlled reaction environment.

Key Insights and Ideas

  • PdO is the key to carbonyl formation: The research strongly suggests that the PdO component within the PdO/Pd-WO3 heterostructure is essential for activating methane to form carbonyl intermediates (*CO). This is a critical step that bypasses the need for external CO.
  • Heterointerface is crucial for C-C coupling: The interface between Pd and PdO is identified as the active site for the cascade reaction between methyl (CH3) and carbonyl (CO) intermediates, leading to the formation of acetic acid. Simply mixing Pd/WO3 with PdO did not yield the same results, highlighting the importance of the integrated heterointerface.
  • Oxygen source for carbonyls: Isotope labeling experiments using 18O-enriched PdO confirmed that the oxygen atom in the carbonyl intermediate, and subsequently in acetic acid, originates from the lattice oxygen of PdO.
  • Volcano-like relationship for PdO content: The performance of the catalyst showed a "volcano-like" trend with varying PdO content. Too little PdO limited carbonyl formation, while too much PdO hindered charge separation and reduced overall activity. PdO/Pd-WO3-2 emerged as the optimal composition.
  • Flow reactor enhances efficiency: The development of a photochemical flow reactor with an arc-shaped channel significantly improved the production rate and selectivity by facilitating continuous contact between reactants and the catalyst, promoting efficient utilization of intermediates.
  • Regeneration is possible: The catalyst's performance degrades over time due to the consumption of PdO and potential structural changes. However, a regeneration process involving heating in air can restore its activity, suggesting potential for long-term use.

Key Results

  • Direct synthesis of acetic acid from methane: Achieved photocatalytically without additional reagents (oxidants or CO).
  • Optimal catalyst performance: The PdO/Pd-WO3-2 nanocomposite demonstrated a production rate of 1.5 mmol g<sub>Pd</sub><sup>-1</sup> h<sup>-1</sup> and a selectivity of 91.6% towards acetic acid in the flow reactor.
  • Methane conversion rate: Achieved an impressive initial methane conversion rate of 181.5 µmol g<sup>-1</sup> h<sup>-1</sup> in the first 3 hours of reaction.
  • Identification of intermediates: In situ DRIFTS and NAP-XPS confirmed the formation of methyl (CH3) and carbonyl (CO) intermediates, and their subsequent coupling.
  • Durability: The flow reactor system showed good reproducibility and durability over five cyclic tests, with negligible leaching of Pd.

Limitations and Future Work

  • Catalyst Degradation: The catalyst performance degrades over time due to the consumption of PdO and potential structural changes in the Pd/PdO heterostructure. While regeneration is possible, it adds a step to the process.
  • WO3 Reduction: The WO3 component can be reduced by photo-induced electrons, leading to gradual lattice oxygen loss, which also contributes to performance decay.
  • Intermediate Self-Coupling: The paper notes that generated CH3 can undergo self-coupling to produce C2H6, suggesting that controlling CH3 utilization is key to further improving acetic acid selectivity.
  • Future Directions: The authors suggest that controllable utilization of *CH3 in solution and gas phases is important for improving production rates and selectivity. They also propose that this work opens avenues for the synthesis of other C2+ oxygenates from methane under mild conditions. The development of more robust catalysts with improved long-term stability and efficient regeneration strategies would be beneficial.

Summary updated

Abstract

Oxidative carbonylation of methane is an appealing approach to the synthesis of acetic acid but is limited by the demand for additional reagents. Here, we report a direct synthesis of CH<sub>3</sub>COOH solely from CH<sub>4</sub> via photochemical conversion without additional reagents. This is made possible through the construction of the PdO/Pd-WO<sub>3</sub> heterointerface nanocomposite containing active sites for CH<sub>4</sub> activation and C-C coupling. In situ characterizations reveal that CH<sub>4</sub> is dissociated into methyl groups on Pd sites while oxygen from PdO is the responsible for carbonyl formation. The cascade reaction between the methyl and carbonyl groups generates an acetyl precursor which is subsequently converted to CH<sub>3</sub>COOH. Remarkably, a production rate of 1.5 mmol g<sub>Pd</sub><sup>-1</sup> h<sup>-1</sup> and selectivity of 91.6% toward CH<sub>3</sub>COOH is achieved in a photochemical flow reactor. This work provides insights into intermediate control via material design, and opens an avenue to conversion of CH<sub>4</sub> to oxygenates.
BibTeX
@inproceedings{zhang2023light,
  author = {Wenqing Zhang and Dawei Xi and Yihong Chen and Aobo Chen and Yawen Jiang and Hengjie Liu and Zeyu Zhou and Hui Zhang and Zhi Liu and Ran Long and Yujie Xiong},
  title = {{Light-driven flow synthesis of acetic acid from methane with chemical looping}},
  booktitle = {Nature Communications},
  year = {2023},
  doi = {10.1038/s41467-023-38731-y},
}
Figure