Ligand-Directed Self-Assembly of Organic-Semiconductor/Quantum-Dot Blend Films Enables Efficient Triplet Exciton-Photon Conversion

Victor Gray, Daniel T. W. Toolan, Simon Dowland, Jesse R. Allardice, Michael P. Weir, Zhilong Zhang, James Xiao, Anastasia Klimash, Jurjen Winkel, Emma K. Holland, Garrett Fregoso, John E. Anthony, Hugo Bronstein, Richard H. Friend, Anthony J. Ryan, Richard A. Jones, Neil C. Greenham, Akshay RaoJournal of the American Chemical Society 2024 · DOI

TL;DR

Researchers have developed a novel method to create highly uniform blends of organic semiconductors and quantum dots (QDs) by engineering the QD surface with electronically active ligands. This approach overcomes the common problem of phase separation, enabling efficient energy transfer between the materials for applications like enhanced solar energy harvesting and photon upconversion.

What Problem Does This Paper Address?

Combining organic semiconductors and quantum dots (QDs) holds immense promise for next-generation optoelectronic devices, offering a synergistic blend of their unique properties. However, a major hurdle has been the tendency of these materials to aggregate and separate into distinct phases during film formation. This poor morphology compromises the crucial interfaces needed for efficient energy or charge transfer, significantly hindering device performance in applications like photovoltaics, photodetectors, and photon frequency conversion. The paper tackles this challenge by developing a strategy to achieve well-dispersed, intermixed organic-QD films.

Methods

The core innovation lies in a ligand-directed self-assembly approach. Instead of using standard, inert organic ligands on the QDs, the researchers functionalized the QD surface with electronically active, soluble semiconductor ligands that are chemically matched to the organic semiconductor host material. This "active ligand" strategy promotes favorable interactions, guiding the self-assembly of the blend into a more homogeneous structure.

Key characterization techniques employed include:

  • Small-Angle X-ray and Neutron Scattering (SAXS/SANS): Used to analyze the structure and dispersity of the QD core and the surrounding ligand shell, confirming successful ligand exchange and quantifying ligand density.
  • Grazing Incidence X-ray Scattering (GISAXS): Provided insights into the film morphology and the ordering of QDs within the organic matrix.
  • Transmission Electron Microscopy (TEM): Offered direct visual confirmation of the QD dispersion and aggregation in the films.
  • Steady-State and Time-Resolved Optical Spectroscopy: Essential for evaluating the optoelectronic properties, including absorption, photoluminescence (PL), and energy transfer efficiencies.
  • Magnetic Field-Dependent PL Measurements: Used to confirm the role of singlet fission and triplet energy transfer in the observed phenomena.

Datasets

Not discussed in the paper. The study focuses on experimental fabrication and characterization of novel material blends.

Key Insights and Ideas

  • Ligand "Matchmaking" is Crucial: The success of the blend hinges on the chemical and electronic compatibility between the QD ligand and the organic host. Simply using inert ligands leads to aggregation, while active, matched ligands promote uniform dispersion.
  • Directed Self-Assembly: The active ligands act as molecular "glue," directing the self-assembly process to prevent phase segregation and QD aggregation.
  • Preserving Electronic Properties: The approach not only improves morphology but also preserves the intrinsic electronic properties of both the organic semiconductor and the QDs, which is vital for efficient energy transfer.
  • Versatile Application: The demonstrated strategy is effective for two distinct photon conversion processes: singlet fission photon multiplication (SF-PM) and triplet-triplet annihilation photon upconversion (TTA-UC), highlighting its broad applicability.

Key Results

  • Improved QD Dispersion: Films fabricated with active ligands (PbS-TET-CA:TIPS-Tc) showed significantly more homogeneous QD dispersion compared to films with conventional ligands (PbS-OA:TIPS-Tc), as evidenced by TEM and GISAXS.
  • Efficient Triplet Transfer: Near-unity efficiency for triplet exciton transfer across the organic-inorganic interface was achieved.
  • High SF-PM Performance: The PbS-TET-CA:TIPS-Tc films achieved an exciton multiplication factor (EMF) of (186 ± 18)%, indicating efficient singlet fission in the organic phase and subsequent triplet transfer to QDs. This is a substantial improvement over films with conventional ligands, which showed a negative EMF (-4 ± 8)%.
  • Measurable TTA-UC: Despite an energy mismatch, the approach enabled measurable solid-state upconversion quantum yield (UCQY) of 0.1 ± 0.06% for the TTA-UC system, which was significantly better than the solution-phase counterpart.

Limitations and Future Work

  • Energy Mismatch in TTA-UC: For TTA-UC, a slight mismatch in triplet energy levels between the organic host (F-TA) and the QD ligand (TA-CA) limited the efficiency of triplet migration, resulting in a lower UCQY.
  • QD PLQE for SF-PM: For SF-PM to be practical, QDs with higher photoluminescence quantum yields (PLQE) are needed. The authors suggest that PbS QDs with larger band gaps (around 1000 nm) could offer higher PLQEs.
  • SF Material Optimization: Developing SF materials with triplet energies better matched to these higher-bandgap QDs is crucial for maximizing SF-PM efficiency.
  • UCQY Enhancement: For TTA-UC, the development of organic materials with higher solid-state PLQYs is required to boost the overall UCQY.

The authors propose that optimizing the relative energy levels of the organic and inorganic components, alongside developing higher-performing QDs and organic materials, will pave the way for practical solid-state SF-PM and TTA-UC composites. The general strategy of ligand-directed self-assembly is also highlighted as a promising route for controlling morphology in a wide range of organic-QD blend applications.

Summary updated

Abstract

Blends comprising organic semiconductors and inorganic quantum dots (QDs) are relevant for many optoelectronic applications and devices. However, the individual components in organic-QD blends have a strong tendency to aggregate and phase-separate during film processing, compromising both their structural and electronic properties. Here, we demonstrate a QD surface engineering approach using electronically active, highly soluble semiconductor ligands that are matched to the organic semiconductor host material to achieve well-dispersed inorganic-organic blend films, as characterized by X-ray and neutron scattering, and electron microscopies. This approach preserves the electronic properties of the organic and QD phases and also creates an optimized interface between them. We exemplify this in two emerging applications, singlet-fission-based photon multiplication (SF-PM) and triplet-triplet annihilation-based photon upconversion (TTA-UC). Steady-state and time-resolved optical spectroscopy shows that triplet excitons can be transferred with near unity efficiently across the organic-inorganic interface, while the organic films maintain efficient SF (190% yield) in the organic phase. By changing the relative energy between organic and inorganic components, yellow upconverted emission is observed upon 790 nm NIR excitation. Overall, we provide a highly versatile approach to overcome longstanding challenges in the blending of organic semiconductors with QDs that have relevance for many optical and optoelectronic applications.
BibTeX
@article{gray2024ligand,
  author = {Victor Gray and Daniel T. W. Toolan and Simon Dowland and Jesse R. Allardice and Michael P. Weir and Zhilong Zhang and James Xiao and Anastasia Klimash and Jurjen Winkel and Emma K. Holland and Garrett Fregoso and John E. Anthony and Hugo Bronstein and Richard H. Friend and Anthony J. Ryan and Richard A. Jones and Neil C. Greenham and Akshay Rao},
  title = {{Ligand-Directed Self-Assembly of Organic-Semiconductor/Quantum-Dot Blend Films Enables Efficient Triplet Exciton-Photon Conversion}},
  journal = {Journal of the American Chemical Society},
  year = {2024},
  doi = {10.1021/jacs.4c00125},
}

Loading related content...

Figure