LATTES: a new gamma-ray detector concept for South America

P. Assis, U. Barres de Almeida, A. Blanco, R. Conceição, B. D’Ettoree Piazzoli, A. De Angelis, M. Doro, P. Fonte, L. Lopes, G. Matthiae, M. Pimenta, R.c. Shellard, B. ToméSpringer Link (Chiba Institute of Technology) 2017 · DOI

TL;DR

This paper introduces LATTES, a novel hybrid detector concept designed to fill a critical gap in gamma-ray astronomy by offering improved sensitivity at lower energies (~100 GeV) with a wide field of view. This South American-based experiment aims to complement existing observatories, enabling the detection of transient phenomena and long-term observations of variable sources.

What Problem Does This Paper Address?

Detecting very high-energy (VHE) gamma-rays is crucial for understanding extreme astrophysical phenomena. Current methods rely on either Cherenkov detectors (with lower energy thresholds but narrow fields of view) or Extensive Air Shower (EAS) arrays (with wider fields of view but higher energy thresholds). This leaves a significant gap in sensitivity around 100 GeV, particularly for the Southern Hemisphere sky. Furthermore, while satellite-based instruments like Fermi can detect gamma-rays at lower energies, their limited collection area makes them insufficient for the rapidly decreasing flux of higher-energy photons. The LATTES project aims to bridge this gap by providing a wide-field-of-view instrument with enhanced sensitivity in the 100 GeV range, crucial for studying transient events and extended sources.

Methods

LATTES proposes a novel hybrid detector design combining Resistive Plate Chambers (RPCs) and Water Cherenkov Detectors (WCDs). Each station consists of two RPCs placed above a WCD. RPCs, with their fine segmentation and fast timing, help reconstruct the shower's direction, while the WCD provides a calorimetric measurement of secondary particles, crucial for lowering the energy threshold. A thin lead plate is included to convert secondary photons, improving geometrical reconstruction. The system is designed to trigger on signals within the WCD, allowing the RPCs to operate at a low threshold while minimizing noise. The detector's performance was evaluated using end-to-end Monte Carlo simulations with CORSIKA for shower generation and Geant4 for detector response.

Datasets

The study utilizes simulated datasets generated for gamma-ray and proton primaries. Specifically, 10,000 CORSIKA simulations were performed for energies ranging from 10 GeV to 5 TeV. These simulations were weighted to represent power-law differential energy spectra with an index of -1. Proton simulations covered zenith angles between 5 and 15 degrees, while gamma-ray simulations were fixed at a 10-degree zenith angle. No real-world observational datasets were used for evaluation in this paper.

Key Insights and Ideas

  • Hybrid Detector Synergy: The combination of RPCs for precise timing and segmentation with WCDs for calorimetric measurements offers a powerful synergy, enabling both good angular resolution and a lower energy threshold than traditional EAS arrays.
  • Filling the 100 GeV Gap: LATTES directly addresses a critical observational gap in gamma-ray astronomy, providing a much-needed instrument for this energy range, especially in the Southern Hemisphere.
  • Complementarity to IACTs: The wide field of view and triggering capabilities of LATTES make it an ideal complementary experiment to Imaging Atmospheric Cherenkov Telescopes (IACTs), enabling rapid alerts for transient phenomena and facilitating long-term monitoring.
  • High-Altitude Advantage: The proposed installation at ~5200 m a.s.l. is crucial for maximizing the detector's sensitivity and performance.

Key Results

The Monte Carlo simulations indicate that LATTES can achieve a reasonable energy resolution of approximately 100% at the lower end of its energy range (~100 GeV), primarily limited by shower-to-shower fluctuations. The angular resolution is estimated to be better than 2 degrees at 100 GeV. The effective area for gamma-ray primaries at 100 GeV, even after selection cuts, is found to be around 103 m². The projected differential sensitivity for steady sources after one year of observation shows that LATTES can cover the gap between Fermi and HAWC sensitivities in the 100 GeV region.

Limitations and Future Work

The authors acknowledge that the gamma-hadron discrimination capabilities of the hybrid detector are still largely unexplored and require further study. For the sensitivity calculations, they conservatively assumed no background rejection below 300 GeV and used HAWC's gamma/hadron capabilities as an ansatz for higher energies. These aspects need to be thoroughly investigated in future work. The paper also suggests that LATTES could serve as a valuable trigger for transient phenomena and enable long-term observations of variable sources, highlighting its potential for future discoveries.

Summary updated

Abstract

Currently the detection of Very High Energy gamma-rays for astrophysics rely on the measurement of the Extensive Air Showers (EAS) either using Cherenkov detectors or EAS arrays with larger field of views but also larger energy thresholds. In this talk we present a novel hybrid detector concept for a EAS array with an improved sensitivity in the lower energies (~ 100 GeV). We discuss its main features, capabilities and present preliminary results on its expected perfomances and sensitivities.This wide field of view experiment is planned to be installed at high altitude in South America making it a complementary project to the planned Cherenkov telescope experiments and a powerful tool to trigger further observations of variable sources and to detect transients phenomena.
BibTeX
@inproceedings{assis2017lattes,
  author = {P. Assis and U. Barres de Almeida and A. Blanco and R. Conceição and B. D’Ettoree Piazzoli and A. De Angelis and M. Doro and P. Fonte and L. Lopes and G. Matthiae and M. Pimenta and R.C. Shellard and B. Tomé},
  title = {{LATTES: a new gamma-ray detector concept for South America}},
  booktitle = {Springer Link (Chiba Institute of Technology)},
  year = {2017},
  doi = {10.1051/epjconf/201713603013/pdf},
}
Figure