Large Size Silicon Interposer and 3D IC Integration for System-in-Packaging (SiP)

John H. Lau, Pei-Jer Tzeng, Chau‐Jie Zhan, Ching-Kuan Lee, Ming-Ji Dai, Jui‐Chin Chen, Yu-Chen Hsin, Shang-Chun Chen, Chien-Ying Wu, Li Li, Peng Su, Jie Xue, M. BrillhartIMAPSource 2012 · DOI

Abstract

The feasibility study of a 3D IC integration SiP is demonstrated in this investigation. The heart of this SiP is a TSV (through-silicon via) passive interposer (28mm × 28mm) with double sided wiring layers. This interposer is used to support a very large chip (22mm × 18mm) on its top-side and 2 smaller chips (10mm × 10mm) at its bottom-side (a truly 3D IC integration). The bottom side of this interposer is attached to an organic substrate (40mm × 40mm) (with ordinary lead-free solder bumps). The lead-free micro solder bumps (Cu/Sn) on all the chips are made by wafer bumping with a UBM (under bump metallurgy) of Ti/Cu and the bump structure of Cu and Sn.
BibTeX
@inproceedings{lau2012large,
  author = {John H. Lau and Pei-Jer Tzeng and Chau‐Jie Zhan and Ching-Kuan Lee and Ming-Ji Dai and Jui‐Chin Chen and Yu-Chen Hsin and Shang-Chun Chen and Chien-Ying Wu and Li Li and Peng Su and Jie Xue and M. Brillhart},
  title = {{Large Size Silicon Interposer and 3D IC Integration for System-in-Packaging (SiP)}},
  booktitle = {IMAPSource},
  year = {2012},
  doi = {10.4071/isom-2012-thp61},
}

Loading related content...

Figure