Large Magneto-Electric Resistance in the Topological Dirac Semimetal alpha Sn

Yuejie Zhang, Vijaysankar Kalappattil, Chuan‐Pu Liu, Steven S.-l. Zhang, Jinjun Ding, Uppalaiah Erugu, Jifa Tian, Jinke Tang, Mingzhong WuarXiv 2021 · DOI · arXiv

Abstract

The spin-momentum locking of surface states in topological quantum materials can produce a resistance that scales linearly with magnetic and electric fields. Such a bilinear magneto-electric resistance (BMER) effect offers a completely new approach for magnetic storage and magnetic field sensing applications. The effects demonstrated so far, however, are relatively weak or for low temperatures. Strong room-temperature BMER effects have now been found in topological Dirac semimetal α-Sn thin films. The epitaxial α-Sn films were grown by sputtering on silicon substrates. They showed BMER responses that are 10^6 times larger than previously reported at room temperature and also larger than that previously reported at low temperatures. These results represent a major advance toward realistic BMER applications. The data also made possible the first characterization of the three-dimensional, Fermi-level spin texture of topological surface states in α-Sn.

Introduction

In topological materials, electrons exhibit spin-momentum locking, where their spin orientation is intrinsically tied to their direction of travel. This unique property enables the bilinear magneto-electric resistance (BMER) effect, a phenomenon where electrical resistance changes linearly with both the applied current and the external magnetic field. While BMER holds immense potential for next-generation magnetic sensors and memory, existing materials have only shown significant responses at cryogenic temperatures or extremely weak signals at room temperature.

Schematic of spin-momentum locking and the BMER mechanism in topological surface states.

Researchers have now achieved a breakthrough using α-Sn (alpha-tin) thin films. By engineering these films to act as Topological Dirac Semimetals (TDS), they observed a BMER response six orders of magnitude stronger than previous room-temperature benchmarks. This discovery, utilizing a single-element material on standard silicon, provides a scalable path for topological electronics.

Methods

The team synthesized ultra-thin films (4–15 nm) of α-Sn on Si(111) substrates using DC magnetron sputtering, a standard industrial technique. The lattice mismatch between tin and silicon induces tensile strain, which stabilizes the α-phase and drives the material into a topological state.

To isolate the BMER signal from conventional magnetoresistance, the researchers employed second-harmonic resistance measurements. By applying an AC current and measuring the voltage response at twice the frequency ($2ω$), they could directly extract the BMER coefficient (χ). Structural integrity and phase purity were confirmed via X-ray diffraction (XRD) and Atomic Force Microscopy (AFM).

Key Results and Discussion

The observed BMER coefficient (χ ≈ 2900 nm²A⁻¹Oe⁻¹) represents a million-fold increase over prior room-temperature reports. This giant effect is attributed to several factors:

  1. Hexagonal Warping: The (111) crystal orientation causes the electron Fermi contour to warp into a hexagon. This warping forces electron spins to tilt out of the 2D plane (by approximately ±30°), creating the specific symmetry required for a strong BMER signal.
  2. Low Carrier Density: BMER scales inversely with the cube of carrier density ($1/n^3$). The low carrier density in α-Sn amplifies the signal from topological surface states.
  3. Surface Asymmetry: Natural differences in roughness between the top and bottom interfaces prevent the BMER signals from opposing surfaces from canceling each other out.
Second-harmonic resistance ($R_{2ω}$) measurements showing the giant BMER signal and its angular dependence.

The team successfully mapped the 3D spin texture of α-Sn, proving that spins rotate and tilt as electrons traverse the hexagonal Fermi surface. The effect was found to be most potent in the thinnest (4 nm) films, where topological properties are most dominant before the material transitions to ordinary β-Sn at higher thicknesses.

Conclusion

This work demonstrates that α-Sn is a premier candidate for room-temperature topological spintronics. While further work is needed to stabilize thicker films and refine the Fermi level via gating or doping, the achievement of a giant, linear BMER response on silicon substrates marks a significant milestone toward practical, high-efficiency magnetic field sensing and data storage technologies.

Summary updated

Abstract

The spin-momentum locking of surface states in topological quantum materials can produce a resistance that scales linearly with magnetic and electric fields. Such a bilinear magneto-electric resistance (BMER) effect offers a completely new approach for magnetic storage and magnetic field sensing applications. The effects demonstrated so far, however, are relatively weak or for low temperatures. Strong room-temperature BMER effects have now been found in topological Dirac semimetal alpha-Sn thin films. The epitaxial alpha-Sn films were grown by sputtering on silicon substrates. They showed BMER responses that are 10^6 times larger than previously reported at room temperature and also larger than that previously reported at low temperatures. These results represent a major advance toward realistic BMER applications. The data also made possible the first characterization of the three-dimensional, Fermi-level spin texture of topological surface states in alpha-Sn.
BibTeX
@misc{zhang2021large,
  author = {Yuejie Zhang and Vijaysankar Kalappattil and Chuan‐Pu Liu and Steven S.-L. Zhang and Jinjun Ding and Uppalaiah Erugu and Jifa Tian and Jinke Tang and Mingzhong Wu},
  title = {{Large Magneto-Electric Resistance in the Topological Dirac Semimetal alpha Sn}},
  year = {2021},
  eprint = {2107.03472},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2107.03472},
}
Figure