Laboratory studies on CO2 foam flooding enhanced by a novel amphiphilic ter-polymer

Xin Xu, Ali Saeedi, Ketao LiuJournal of Petroleum Science and Engineering 2015 · DOI

Introduction

Carbon dioxide ($CO_2$) flooding is a widely adopted technique for Enhanced Oil Recovery (EOR). However, its effectiveness is often hampered by two physical phenomena: viscous fingering, where the low-viscosity gas bypasses the oil, and gravity segregation, where the light gas rises to the top of the reservoir. Creating a $CO_2$ foam can mitigate these issues by increasing the effective viscosity and improving sweep efficiency.

While Hydrolyzed Polyacrylamide (HPAM) is commonly used to stabilize these foams, it performs poorly in high-salinity and high-temperature environments. Under such conditions, HPAM molecules tend to coil or degrade, losing their thickening ability. This study introduces a novel amphiphilic ter-polymer, AVS, designed to maintain stability and performance where traditional polymers fail.

Methodology

The researchers synthesized AVS using acrylamide (AM), 2-acrylamido-2-methylpropane sulfonic acid (AMPS), and a specialized functional monomer. The performance of AVS was benchmarked against standard HPAM across various laboratory tests, including rheology, surface tension measurements, and bulk foam testing.

Experimental Setup

Core flooding experiments were conducted using a high-pressure, high-temperature (HPHT) rig to simulate reservoir conditions (50°C, 2000 psi). Berea sandstone core plugs were used as the porous media. The experimental fluids included crude oil from an offshore Western Australian reservoir (18.5 °API) and brine solutions with salinities up to 50,000 ppm NaCl.

Schematic of the high-pressure, high-temperature (HPHT) core flooding experimental setup.

The study evaluated three injection strategies: direct foam injection (pre-generated), co-injection of gas and liquid, and Surfactant Alternating Gas (SAG).

Results and Discussion

Molecular Design and Stability

The "secret sauce" of AVS lies in its amphiphilic structure. Unlike HPAM, which only thickens the bulk liquid, AVS is surface-active. Its hydrophobic groups migrate to the gas-liquid interface, reinforcing the foam lamellae (the thin films between bubbles).

Chemical structures of (a) HPAM and (b) the novel amphiphilic ter-polymer AVS.

At concentrations above 750 ppm, AVS solutions demonstrated roughly twice the viscosity of HPAM under identical conditions. Crucially, the hydrophobic groups in AVS create a 3D network through hydrophobic association, a process that is actually enhanced by the high temperatures and salinities that typically degrade HPAM.

Enhanced Oil Recovery Performance

In core flooding trials, AVS-enhanced foam achieved a tertiary oil recovery of 28.89%. When compared to HPAM-enhanced foam, AVS provided a significant recovery boost: 3.7% in low-permeability cores and 6.6% in high-permeability cores. The study also identified an optimal gas-to-liquid injection ratio of 3:1 and a "transition foam quality" peak at approximately 72% gas fraction, where apparent viscosity is maximized.

Conclusion

The novel AVS ter-polymer represents a significant advancement in $CO_2$ foam EOR, particularly for harsh reservoir environments. By leveraging hydrophobic association and surface activity, AVS overcomes the thermal and saline limitations of traditional HPAM. While this study provides a robust proof-of-concept, future work should involve longer core composites to better model field-scale kinetics and long-term thermal stability over several months.

Summary updated

BibTeX
@article{xu2015laboratory,
  author = {Xin Xu and Ali Saeedi and Ketao Liu},
  title = {{Laboratory studies on CO2 foam flooding enhanced by a novel amphiphilic ter-polymer}},
  journal = {Journal of Petroleum Science and Engineering},
  year = {2015},
  doi = {10.1016/j.petrol.2015.10.025},
}
Figure