Abstract
The process of unwinding and renaturation of DNA has been widely used in studies of nucleotide sequence organization. Compared with traditional methods for DNA unwinding and renaturation, the label-free and non-destruction detection technology is significant and desiderated. We realized an optical system based on optical rotation via weak measurement for detection of single- and double-strand state of DNA. The optical rotation, which was induced by the status change of single and double DNA strands, was exploited to modulate the preselected polarization of a weak measurement system. With this modulation, the optical rotation caused by the separation of DNA strands can be determined through the center wavelength shift of the output spectrum. By monitoring the wavelength shift in real time, the separation processes of the DNAs with different base ratio (25% and 70%) and length (4nt and 40nt), and DNAs with three terminally modified cholesterol molecules were experimentally explored in varied pH and temperature conditions. In addition, the detection limit of the DNA concentration was obtained to be 5 × 10⁻⁶ mol/L. Our work based on optical rotation detection of single- and double-strand DNA exhibits the unique advantages of real-time monitoring, label-free, non-destruction and simplicity.
Introduction
Understanding the dynamics of DNA denaturation (unwinding) and renaturation (zipping back together) is fundamental to molecular biology and diagnostic technologies like PCR and gene sequencing. Traditional detection methods often rely on fluorescent labels, gold nanoparticles, or electrochemical markers. While effective, these "labels" can interfere with the DNA's natural behavior or destroy the sample. Furthermore, standard polarimetry often lacks the sensitivity required to detect the minute changes in optical rotation that occur during DNA state transitions at low concentrations. This study presents a highly sensitive, label-free, and non-destructive method to distinguish between single-stranded (ssDNA) and double-stranded (dsDNA) by leveraging quantum weak measurement.
Experimental Methods and Setup
The researchers developed an optical transmission system based on the principles of quantum weak measurement to amplify tiny changes in optical rotation.
The system operates through four key stages:
- Pre-selection: Light from a superluminescent diode (SLD) is polarized into a specific initial state.
- Weak Coupling: The light passes through a sample cell (SC) containing DNA. As DNA transitions between single- and double-stranded states, its optical rotation changes, acting as a "weak perturbation" to the light's polarization.
- Post-selection: The light passes through a second polarizer (P2) set at a specific angle.
- Amplification: By tuning the system near a "dark" state (where pre- and post-selection states are almost orthogonal), the tiny change in optical rotation is amplified into a significant shift in the center wavelength of the output spectrum, measured by a spectrograph.
The setup includes a Soleil-Babinet compensator (SBC) to precisely tune the "working point," ensuring maximum sensitivity across varying environmental conditions.
Key Insights and Results
The core innovation lies in using wavelength shifts as a proxy for nearly imperceptible optical rotation changes. This approach bypasses the noise limitations of intensity-based measurements. Key findings include:
- High Sensitivity: Achieving an optical rotation resolution of $2.138 \times 10^{-5}$ degrees, approximately 100 times more sensitive than standard polarimeters.
- Real-time Monitoring: The system successfully tracked DNA "unspooling" in extreme pH environments and refolding during cooling from 104°C.
- Sequence Sensitivity: The magnitude of the wavelength shift correlates with DNA length and Guanine-Cytosine (GC) content. DNA with a 70% GC ratio produced a significantly larger optical state change than a 25% GC ratio.
- Detection Limit: The system can detect DNA at concentrations as low as $5 \times 10^{-6}$ mol/L.
Conclusion
This quantum weak measurement approach offers a robust, transmission-based sensing platform that is largely immune to refractive index changes in the solution. This makes it ideal for experiments involving drastic temperature or pH swings. Future improvements, such as increasing the interaction length of the sample cell, could further lower the detection limit, paving the way for real-time diagnostic tools for genetic markers without expensive chemical reagents.
Summary updated