Kisműholdak fejlesztése a sokoldalúság és a könnyű reprodukálhatóság tükrében

Péter Huszár, Patrik Reizinger, Dorottya Milánkovich, Alexandra SzéllRepüléstudományi 2020 · DOI

Abstract: A világűr mára már nem csak a gazdasági nagyhatalmak kiváltsága. A társuló technológia fejlődésének hatására bekövetkező költségcsökkenés eredményeképpen napjainkban akár egy kis cég, alacsony költségvetéssel is megmérettetheti magát a 21. század űrversenyében. Ehhez biztosítanak tökéletes platformot a nano- és mikroműholdak, amelyek alkalmazási lehetőségei folyamatosan bővülnek. Az egyre változatosabb hasznos terhek azonban értéktelenek a sokoldalú platformok és azok alapvető alrendszerei nélkül, mint például a fedélzeti számítógép, tápegység, kommunikációs egység vagy a műhold térbeli orientációjáért felelős alrendszer (Attitude Determination and Control System – ADCS). Így felmerül az igény egy olyan univerzális műholdplatform fejlesztésére, amelyben a létfontosságú alrendszerek biztosítva vannak különböző, harmadik fél által fejlesztett hasznos terhek, illetve tudományos kísérleti eszközök számára. Ezzel létrehozhatunk egy standardizált, költséghatékony és rugalmasan bővíthető, ezáltal még szélesebb körben elérhető kisműholdas platformot. A cikkben részletesen bemutatunk egy, a fentiekben leírt követelményeknek megfelelő univerzális CubeSatplatformot, kitérünk az egyedi mérnöki módszereket és megoldásokat igénylő fejlesztési folyamatokra, a nagy megbízhatóságú szoftvertechnológia előnyeire és a platform nyújtotta új lehetőségekre.

Introduction

The space sector has undergone a paradigm shift. Once the exclusive domain of global superpowers, technological advancements and the resulting reduction in costs have opened the "New Space" race to smaller entities. Nano- and microsatellites, particularly those following the CubeSat standard, offer a versatile platform for scientific and commercial endeavors. However, the true value of these missions lies in the reliability of the underlying satellite bus—the core system providing power, communication, and orientation.

The Need for a Universal Platform

Traditional CubeSat development often suffered from a "one satellite, one mission" philosophy, where every subsystem was custom-built. This approach led to high development costs and significant failure risks. To address this, the Hungarian company C3S Electronic Development Ltd., under the aegis of the European Space Agency (ESA), developed a standardized, modular 3U/12U satellite platform. By decoupling the core "bus" from the specific payload, researchers can focus their resources on scientific objectives rather than basic infrastructure.

Engineering for Reliability

The transition from "educational toys" to industrial-grade tools requires rigorous engineering. Key technical features of the C3S platform include:

  • Subsystem Redundancy: High reliability is achieved through dual-redundant On-Board Computers (OBC) and Communication (COM) modules.
  • Advanced ADCS: The Attitude Determination and Control System utilizes sensor fusion (MEMS gyroscopes, magnetometers, and star trackers) processed via an Unscented Kalman Filter (UKF) to manage non-linear satellite dynamics.
  • Communication Robustness: Barker 13 coding is used for beacon messages. Furthermore, the COM module utilizes Look-Up Tables (LUT) derived from thermal vacuum chamber testing to compensate for frequency drifts caused by extreme orbital temperature fluctuations.
  • Thermal Management: Deployment of antennas and solar panels is managed via "thermal cutters"—resistor-heated wires that burn through nylon lines. This requires precise temperature monitoring to prevent damage to surrounding electronics.

Testing Methodologies: "Flat Sat" and "Bus Tester"

A cornerstone of the development process is the "Flat Sat" architecture. This method allows all electronic components to be connected and tested on a bench before mechanical integration, significantly reducing the risk of assembly-induced failures. Additionally, a custom "Bus Tester" was developed to verify individual modules against European Cooperation for Space Standardization (ECSS) quality requirements. The operational philosophy also emphasizes a clear split between the Mission Operation Center (MOC), which monitors satellite health, and the Scientific Operation Center (SOC), which manages payload data.

Market Evolution and Results

The demand for reliable CubeSat platforms is driven by a rapidly expanding market. Historical data shows a clear trend toward increased mission frequency and complexity.

Growth of CubeSat launches between 2012 and 2018.

As the market matures, the focus has shifted from simple In-Orbit Demonstrations (IOD) to sophisticated Earth observation and commercial telecommunications constellations.

Scalability and Future Directions

The developed architecture is inherently scalable, supporting configurations from 3U (loaf-of-bread size) to larger 12U models.

Comparison of 3U and 12U CubeSat platform configurations.

While the platform offers significant advantages, certain constraints remain. The authors acknowledge that magnetic actuators (magnetorquers) can only control the satellite in a two-dimensional subspace relative to the Earth's magnetic field. For full 3D agility, reaction wheels are necessary, which increase system complexity and power consumption. Furthermore, future development focuses on "Design for Demise" strategies—selecting materials that ensure the satellite burns up completely upon atmospheric re-entry to mitigate the growing problem of space debris.

Conclusion

By standardizing the essential subsystems of a satellite, the C3S platform provides a cost-effective, flexible, and high-reliability solution for the modern space industry. This approach not only lowers the barrier to entry but also ensures that small-scale missions can achieve professional-grade results in the challenging environment of low Earth orbit.

Summary updated

Abstract

A világűr mára már nem csak a gazdasági nagyhatalmak kiváltsága. A társuló technológia fejlődésének hatására bekövetkező költségcsökkenés eredményeképpen napjainkban akár egy kis cég, alacsony költségvetéssel is megmérettetheti magát a 21. század űrversenyében. Ehhez biztosítanak tökéletes platformot a nano- és mikroműholdak, amelyek alkalmazási lehetőségei folyamatosan bővülnek. Az egyre változatosabb hasznos terhek azonban értéktelenek a sokoldalú platformok és azok alapvető alrendszerei nélkül, mint például a fedélzeti számítógép, tápegység, kommunikációs egység vagy a műhold térbeli orientációjáért felelős alrendszer (Attitude Determination and Control System – ADCS). Így felmerül az igény egy olyan univerzális műholdplatform fejlesztésére, amelyben a létfontosságú alrendszerek biztosítva vannak különböző, harmadik fél által fejlesztett hasznos terhek, illetve tudományos kísérleti eszközök számára. Ezzel létrehozhatunk egy standardizált, költséghatékony és rugalmasan bővíthető, ezáltal még szélesebb körben elérhető kisműholdas platformot. A cikkben részletesen bemutatunk egy, a fentiekben leírt követelményeknek megfelelő univerzális CubeSatplatformot, kitérünk az egyedi mérnöki módszereket és megoldásokat igénylő fejlesztési folyamatokra, a nagy megbízhatóságú szoftvertechnológia előnyeire és a platform nyújtotta új lehetőségekre.
BibTeX
@inproceedings{huszar2020kismuholdak,
  author = {Péter Huszár and Patrik Reizinger and Dorottya Milánkovich and Alexandra Széll},
  title = {{Kisműholdak fejlesztése a sokoldalúság és a könnyű reprodukálhatóság tükrében}},
  booktitle = {Repüléstudományi},
  year = {2020},
  doi = {10.32560/rk.2020.2.6},
}
Figure