Kinetics and thermodynamics study for electrosorption of NaCl onto carbon nanotubes and carbon nanofibers electrodes

Haibo Li, Likun Pan, Yanping Zhang, Linda Zou, Changqing Sun, Yankun Zhan, Zhuo SunChemical 2009 · DOI

TL;DR

This study investigates the electrosorption of NaCl using novel carbon nanotube and carbon nanofiber (CNTs-CNFs) composite films as electrodes. The research reveals that lower temperatures enhance salt removal due to a hydrophobic-hydrophilic transition on the CNTs-CNFs surface, and that the process is best described by Langmuir isotherms and first-order kinetics, indicating a physisorption mechanism.

What Problem Does This Paper Address?

Modern industries generate significant amounts of wastewater containing harmful metal ions and other by-products. Efficiently removing these contaminants is crucial for environmental protection and water reuse. Capacitive deionization (CDI) is a promising technology for this purpose, utilizing porous electrodes to remove ionic species from water. Carbon nanotubes (CNTs) and carbon nanofibers (CNFs) are particularly attractive electrode materials due to their high surface area and low mass transfer resistance. While previous research has explored their use in CDI, a deeper understanding of the electrosorption kinetics and thermodynamics, especially the influence of solution temperature, was lacking. This paper aims to fill this gap by systematically studying these aspects for CNTs-CNFs composite electrodes in NaCl solutions.

Methods

The researchers fabricated CNTs-CNFs composite films by chemical vapor deposition (CVD) on graphite substrates. They then characterized these films using scanning electron microscopy (SEM) for surface morphology and Raman spectroscopy for structural analysis. To remove residual catalyst (Ni) that could interfere with electrosorption, the films were treated with acid.

Batch-mode electrosorption experiments were conducted using these CNTs-CNFs electrodes in NaCl solutions. The key experimental parameters investigated were solution temperature (ranging from 281 K to 295 K in 2 K increments) and initial NaCl concentration. A direct voltage of 1.2 V was applied between the electrodes to drive the electrosorption process. The removal of NaCl was monitored by measuring the solution conductivity over time.

To analyze the experimental data, the researchers employed several modeling approaches:

  • Electrosorption Isotherms: Langmuir and Freundlich isotherm models were used to describe the equilibrium relationship between the amount of adsorbed NaCl and its concentration in the solution.
  • Electrosorption Kinetics: Pseudo-first-order, pseudo-second-order, and parabolic diffusion models were applied to understand the rate of salt removal over time.
  • Thermodynamic Analysis: The van't Hoff equation was used to determine thermodynamic parameters such as standard free energy (ΔG°), standard enthalpy (ΔH°), and standard entropy (ΔS°), providing insights into the energy changes and spontaneity of the electrosorption process.

Datasets

Not discussed in the paper. The study relies on experimental data generated from controlled laboratory experiments using synthesized CNTs-CNFs electrodes and prepared NaCl solutions.

Key Insights and Ideas

  • Temperature Matters: A Hydrophobic-Hydrophilic Shift: The most striking finding is the significant impact of solution temperature on salt removal. As the temperature decreases, salt removal increases. This is attributed to a temperature-induced hydrophobic-hydrophilic transition on the CNTs-CNFs surface, which enhances the affinity between the electrode material and hydrated ions at lower temperatures. This suggests that optimizing temperature is a crucial factor for efficient CDI.
  • Langmuir Dominance: The electrosorption of NaCl onto CNTs-CNFs electrodes is well-described by the Langmuir isotherm model. This implies that the adsorption occurs on a finite number of active sites and that each site has equivalent energy, suggesting a monolayer adsorption process.
  • First-Order Kinetics: The electrosorption process follows first-order kinetics. This indicates that the rate of salt removal is directly proportional to the concentration of the adsorbate. This is a simpler kinetic model compared to second-order or diffusion-controlled processes, which can simplify process design and control.
  • Physisorption at Play: Thermodynamic analysis strongly suggests that the electrosorption of NaCl onto CNTs-CNFs is a physisorption process. The relatively low enthalpy change (ΔH°) and negative free energy (ΔG°) are characteristic of physical adsorption, which involves weaker intermolecular forces rather than chemical bond formation.

Key Results

  • Salt Removal: Salt removal decreased from 45.4% at 281 K to 33% at 295 K.
  • Isotherm Fitting: The Langmuir isotherm provided a better fit to the experimental data (regression coefficients r² > 0.97) compared to the Freundlich isotherm (r² > 0.94) across all tested temperatures.
  • Maximum Adsorption Capacity (qm): The calculated qm values from the Langmuir model decreased with increasing temperature, from 22.00 mg/g at 281 K to 12.33 mg/g at 295 K.
  • Kinetics: The electrosorption kinetics were best described by a first-order model, with the rate constant (k) increasing as the solution temperature decreased, indicating a higher diffusion rate at lower temperatures.
  • Thermodynamics: The electrosorption process was found to be thermodynamically favorable (negative ΔG°), with an endothermic enthalpy change (positive ΔH°), consistent with physisorption.

Limitations and Future Work

  • Limited Temperature Range: The study focused on a relatively narrow temperature range (281-295 K). Further investigation into a wider temperature spectrum could provide more comprehensive insights.
  • Single Salt System: The experiments were conducted with NaCl only. Future work could explore the electrosorption of mixed salt solutions or other ionic species to assess the selectivity and performance of CNTs-CNFs electrodes in more complex water matrices.
  • Electrode Stability: While not explicitly detailed as a limitation, the long-term stability and reusability of the CNTs-CNFs electrodes under repeated charge-discharge cycles would be an important area for future research.
  • Scale-up: The study was conducted in batch mode. Investigating the performance of these electrodes in continuous flow systems would be crucial for practical applications.

The authors suggest that the observed hydrophobic-hydrophilic transition and the physisorption nature of the process are key to understanding and optimizing electrosorption for water purification.

Summary updated

BibTeX
@inproceedings{li2009kinetics,
  author = {Haibo Li and Likun Pan and Yanping Zhang and Linda Zou and Changqing Sun and Yankun Zhan and Zhuo Sun},
  title = {{Kinetics and thermodynamics study for electrosorption of NaCl onto carbon nanotubes and carbon nanofibers electrodes}},
  booktitle = {Chemical},
  year = {2009},
  doi = {10.1016/j.cplett.2009.12.031},
}
Figure