Joint Discrete Antenna Positioning and Beamforming Optimization in Movable Antenna Enabled Full-Duplex ISAC Networks

Zhendong Li, Jin Ba, Zhou Su, Haixia Peng, Yuntao Wang, Wen Chen, Qingqing WuIEEE Trans. Wireless Communications 2025 · DOI

TL;DR

This paper introduces a novel approach for optimizing movable antenna (MA) systems in full-duplex Integrated Sensing and Communication (ISAC) networks. By jointly optimizing MA positions and beamforming, the system significantly reduces transmit power consumption compared to traditional fixed antenna setups, enhancing overall efficiency.

What Problem Does This Paper Address?

The paper tackles the challenge of optimizing energy efficiency in full-duplex ISAC networks, which aim to simultaneously provide communication and sensing services. A key issue is the high transmit power required, especially when dealing with complex antenna configurations. Traditional systems often use fixed antenna arrays, limiting their ability to adapt to changing channel conditions and exploit spatial diversity. Movable antennas (MAs) offer a solution by allowing dynamic adjustment of antenna positions to maximize spatial diversity gain. However, optimizing the discrete positions of these MAs, along with beamforming vectors, sensing parameters, and user transmit power, presents a highly coupled and non-convex optimization problem that is difficult to solve directly.

Methods

The authors propose a novel optimization framework based on the Discrete Binary Particle Swarm Optimization (BPSO) algorithm. Here's a breakdown of their approach:

  • Problem Formulation: They formulate a problem to minimize the total transmit power consumption by jointly optimizing:
  • Discrete positions of MA elements.
  • Beamforming vectors for communication and sensing.
  • Sensing signal covariance matrix.
  • User transmit power.
  • Handling Non-Convexity: To address the inherent non-convexity and rank-1 constraints in the optimization problem, they employ:
  • Difference-of-Convex (DC) Programming: Used to transform non-convex terms into a difference of convex functions.
  • Successive Convex Approximation (SCA): Applied iteratively to approximate non-convex functions with convex ones, allowing for efficient optimization.
  • BPSO Algorithm: The BPSO framework is used to iteratively search for the optimal discrete positions of MA elements. Within each iteration, the fitness function (representing transmit power) is solved using DC programming and SCA. Once the BPSO iteration converges, the optimal discrete MA positions are determined, and the corresponding beamforming vectors, sensing covariance matrix, and user transmit power are derived.
  • Transforming Constraints: To facilitate optimization, they transform the SINR constraints and introduce auxiliary variables. They also address the rank-1 constraint on beamforming matrices using a penalty term and iterative optimization.

Datasets

Not discussed in the paper. The paper relies on simulated data generated based on the defined system model and parameters.

Key Insights and Ideas

  • Movable Antennas for ISAC Efficiency: The core idea is that by allowing antennas to move to optimal discrete positions, MA-enabled ISAC systems can significantly boost spatial diversity, leading to substantial reductions in transmit power compared to fixed antenna arrays.
  • BPSO for Discrete Optimization: BPSO proves to be an effective metaheuristic for navigating the complex search space of discrete antenna positions, especially when combined with techniques for handling non-convexity.
  • Joint Optimization is Crucial: The paper emphasizes that jointly optimizing antenna positions, beamforming, and power allocation is key to achieving maximum energy efficiency, rather than optimizing these parameters in isolation.
  • Practicality of Discrete Positions: The choice of discrete MA positions is motivated by the need for simpler control and reduced mechanical complexity in practical deployments, making the proposed solution more feasible.

Key Results

  • Significant Power Reduction: Numerical simulations demonstrate that the proposed MA-enabled ISAC system achieves substantial reductions in total transmit power consumption compared to traditional fixed antenna arrays. For instance, gains of up to 52.4 W were observed in one scenario (Fig. 3).
  • Improved Performance with MA: The MA-enabled system consistently outperforms fixed antenna arrays across various scenarios, including different sensing SINR thresholds, communication SINR thresholds, numbers of users, and antenna element configurations.
  • Beampattern Control: The beampattern simulations show that the algorithm can effectively steer beams towards target users for both sensing and communication, while simultaneously suppressing interference.
  • Convergence: The BPSO algorithm demonstrates good convergence behavior, typically reaching a stable solution within six to seven iterations.

Limitations and Future Work

  • Perfect CSI Assumption: The paper assumes perfect channel state information (CSI) is available at the FD-DFRC-BS. The authors acknowledge that real-world scenarios often involve imperfect CSI, and this is suggested as a direction for future research.
  • Computational Complexity: While BPSO is efficient, it still introduces computational overhead. The paper notes that balancing computational load with achieving optimal solutions is an ongoing research area.
  • Imperfect CSI: Investigating the performance under imperfect CSI conditions would make the system more practical.
  • Dynamic Environments: Exploring the system's performance in more dynamic environments with rapidly changing channels or user mobility could be a valuable extension.
  • Hardware Imperfections: Analyzing the impact of hardware impairments, such as non-linearities and quantization errors, on the system's performance would be beneficial.

Summary updated

Abstract

In this paper, we propose a full-duplex integrated sensing and communication (ISAC) system enabled by a movable antenna (MA). By leveraging the characteristic of MA that can increase the spatial diversity gain, the performance of the system can be enhanced. We formulate a problem of minimizing the total transmit power consumption via jointly optimizing the discrete position of MA elements, beamforming vectors, sensing signal covariance matrix and user transmit power. Given the significant coupling of optimization variables, the formulated problem presents a non-convex optimization challenge that poses difficulties for direct resolution. To address this challenging issue, the discrete binary particle swarm optimization (BPSO) algorithm framework is employed to solve the formulated problem. Specifically, the discrete positions of MA elements are first obtained by iteratively solving the fitness function. The difference-of-convex (DC) programming and successive convex approximation (SCA) are used to handle non-convex and rank-1 terms in the fitness function. Once the BPSO iteration is complete, the discrete positions of MA elements can be determined, and we can obtain the solutions for beamforming vectors, sensing signal covariance matrix and user transmit power. Numerical results demonstrate the superiority of the proposed system in reducing the total transmit power consumption compared with fixed antenna arrays.
BibTeX
@article{li2025joint,
  author = {Zhendong Li and Jin Ba and Zhou Su and Haixia Peng and Yuntao Wang and Wen Chen and Qingqing Wu},
  title = {{Joint Discrete Antenna Positioning and Beamforming Optimization in Movable Antenna Enabled Full-Duplex ISAC Networks}},
  journal = {IEEE Transactions on Wireless Communications},
  year = {2025},
  doi = {10.1109/twc.2025.3630154},
}
Figure