Joint Communication and Sensing in RIS-enabled mmWave Networks

Lu Wang, Luis F. Abanto‐Leon, Arash AsadiarXiv 2022 · DOI · arXiv

TL;DR

This paper introduces a novel framework for 6G networks that uses Reconfigurable Intelligent Surfaces (RIS) to simultaneously boost high-speed data transmission and environmental sensing. By co-designing the base station's hybrid beamforming and the RIS phase shifts, the authors demonstrate that RIS can effectively "see" around corners to detect targets while maintaining robust communication links for multiple users.

What Problem Does This Paper Address?

As we move toward 6G, researchers are pursuing Joint Communication and Sensing (JCAS)—the idea that a single wireless signal can both carry data and act like a radar to map the environment. However, two major hurdles exist:

  1. The mmWave Blockage Problem: Millimeter-wave (mmWave) frequencies offer huge bandwidth but are easily blocked by buildings or trees. If the line-of-sight is blocked, both communication and sensing fail.
  2. Hardware Complexity: While "fully digital" beamforming (where every antenna has its own radio chain) provides maximum control, it is too expensive and power-hungry for mmWave arrays with dozens of antennas. "Hybrid" beamforming is the practical alternative, but it is much harder to optimize.

Most existing research either ignores RIS or assumes unrealistic fully digital hardware. This paper fills that gap by providing an optimization strategy for a practical mmWave OFDM (multi-carrier) system assisted by an RIS.

Methods

The authors formulate a complex optimization problem: minimize the error between a designed sensing beampattern and an ideal reference pattern, subject to strict requirements for user signal quality (SINR) and hardware power limits.

To solve this non-convex "mathematical nightmare," they employ several sophisticated techniques:

  • Auxiliary Variable Decoupling: They introduce a "dummy" variable to separate the digital baseband beamformer from the analog RF beamformer, making the math more manageable.
  • Penalty Method: They move the hard SINR constraints into the objective function, "penalizing" the algorithm if it fails to meet communication requirements.
  • Manifold-based ADMM: This is the core engine. The Alternating Direction Method of Multipliers (ADMM) breaks the big problem into smaller pieces. Because RIS elements and RF phase shifters have "constant-modulus" constraints (they only change the phase, not the amplitude), the authors use Manifold Optimization (specifically Riemannian Conjugate Gradient) to navigate the complex geometric space of these constraints efficiently.

Datasets

The paper relies on numerical simulations rather than physical datasets. They use the extended Saleh-Valenzuela channel model, which is the industry standard for simulating how mmWave signals bounce around in realistic environments.

  • Setup: A base station with 64 antennas, 3 targets, and up to 10 users.
  • Benchmarks: They compare their proposed scheme against three others: fully digital beamforming (the "upper bound"), and versions of the system using random (unoptimized) RIS phase shifts.

Key Insights and Ideas

  • RIS as a "Sensing Mirror": The paper shows that RIS isn't just a relay for data; it can be shaped into a high-precision "sensing beam" to detect targets in areas the base station cannot directly see.
  • The Power of Optimization: Simply having an RIS isn't enough. The results show that a system with a randomly configured RIS performs nearly as poorly as one without an RIS at all. The "intelligence" in Reconfigurable Intelligent Surfaces comes entirely from the joint design of the phase shifts.
  • The JCAS Tradeoff: There is a zero-sum game between data and radar. To get a "cleaner" sensing beampattern (lower MSE), the system must often sacrifice some communication performance (lower SINR). The paper quantifies this "Pareto front," allowing operators to choose whether to prioritize bits or beams.

Key Results

  • Superior Connectivity: The proposed scheme achieved at least an 80.5% improvement in SINR feasibility (the ability to meet user requirements) compared to systems with random RIS settings.
  • Sharper Sensing: The optimized design improved the beampattern Mean Square Error (MSE) by 26.54% over random configurations.
  • Scalability: As the number of RIS elements increases, the sensing beams become narrower and the gain higher (measured by Peak-Side-Lobe-Ratio or PSLR), proving that larger RIS arrays provide diminishing but significant returns for environmental awareness.
  • Hybrid vs. Digital: While fully digital systems still perform better, the proposed hybrid approach gets impressively close while using significantly fewer expensive RF chains.

Limitations and Future Work

  • Perfect CSI Assumption: The study assumes the system has "Perfect Channel State Information"—meaning it knows exactly how the signal will bounce off every surface. In the real world, estimating these channels is notoriously difficult, especially for the RIS.
  • Static Environment: The current model looks at a "snapshot" in time. Future work needs to account for mobility—how do we keep the beams focused when users and targets (like drones or cars) are moving at high speeds?
  • Hardware Impairments: The model assumes the RIS can shift phases perfectly. Real-world RIS hardware often has "quantized" phases (e.g., only 2 or 4 possible settings), which would add another layer of complexity to the optimization.

Summary updated

Abstract

Empowering cellular networks with augmented sensing capabilities is one of the key research areas in 6G communication systems. Recently, we have witnessed a plethora of efforts to devise solutions that integrate sensing capabilities into communication systems, i.e., joint communication and sensing (JCAS). However, most prior works do not consider the impact of reconfigurable intelligent surfaces (RISs) on JCAS systems, especially at millimeter-wave (mmWave) bands. Given that RISs are expected to become an integral part of cellular systems, it is important to investigate their potential in cellular networks beyond communication goals. In this paper, we study mmWave orthogonal frequency-division multiplexing (OFDM) JCAS systems in the presence of RISs. Specifically, we jointly design the hybrid beamforming and RIS phase shifts to guarantee the sensing functionalities via minimizing a chordal-distance metric, subject to signal-to-interference-plus-noise (SINR) and power constraints. The non-convexity of the investigated problem poses a challenge which we address by proposing a solution based on the penalty method and manifold-based alternating direction method of multipliers (ADMM). Simulation results demonstrate that under various settings both sensing and communication experience improved performance when the RIS is adequately designed. In addition, we discuss the tradeoff between sensing and communication.
BibTeX
@misc{wang2022joint,
  author = {Lu Wang and Luis F. Abanto‐Leon and Arash Asadi},
  title = {{Joint Communication and Sensing in RIS-enabled mmWave Networks}},
  year = {2022},
  eprint = {2210.03685},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2210.03685},
}
Figure