Abstract
A fluid reconfigurable intelligent surface (fRIS)-aided integrated sensing and communication (ISAC) system is proposed to enhance multi-target sensing and multi-user communication. Unlike the conventional RIS, the fRIS employs movable elements with adjustable positions, offering additional spatial degrees of freedom. In this system, a joint optimization problem is formulated to minimize sensing beampattern mismatch and symbol estimation error. An algorithm based on alternating minimization is devised to handle the resultant non-convex problem, where the subproblems are solved via augmented Lagrangian method, quadratic programming, semidefinite relaxation, and majorization-minimization. A key challenge is that the element positions affect both incident and reflective channels, leading to the high-order composite objective functions. As a remedy, the high-order terms are transformed into linear and linear-difference forms by exploiting the structural characteristics of fRIS and the channels. Numerical results demonstrate the superiority of the proposed scheme over conventional RIS-aided ISAC and other benchmarks.
Introduction
Integrated Sensing and Communication (ISAC) is a cornerstone of 6G wireless technology, where the same spectrum and hardware are utilized for both data transmission and environmental radar sensing. Reconfigurable Intelligent Surfaces (RIS) are frequently employed to assist ISAC by reflecting signals around obstacles. However, conventional RIS elements are fixed in place, often requiring a massive number of elements to achieve high performance and spatial diversity. This leads to high manufacturing costs and significant computational burdens for optimization.
To address these limitations, this paper introduces the concept of fluid RIS (fRIS). In an fRIS system, reflecting elements can physically move within a defined area. This "movable antenna" concept allows the system to physically reshape the propagation geometry, providing a more powerful way to mitigate interference and enhance signal strength than phase-shifting alone.
System Model and Problem Formulation
The proposed system consists of a base station (BS) serving multiple communication users while simultaneously sensing multiple aerial targets, assisted by an fRIS mounted on a building. The fRIS features movable elements that can adjust their positions to optimize the reflective channels.
The core objective is to jointly optimize the transmit beamforming at the BS and the phase shifts and positions of the fRIS elements. The goal is to minimize a weighted sum of the sensing beampattern mismatch and the communication symbol estimation error. A significant challenge arises because the element positions influence both the incident (BS-to-RIS) and reflective (RIS-to-user/target) channels, resulting in a complex quartic (fourth-order) non-convex objective function.
Optimization Methodology
To solve the non-convex joint optimization problem, the authors developed an Alternating Minimization (AM) algorithm. This approach decomposes the main problem into four iterative subproblems:
- Communication Symbol Estimation: Solved using a closed-form expression.
- fRIS Phase Shift Optimization: Addressed via Semidefinite Relaxation (SDR) or Manifold Optimization.
- Transmit Waveform Design: Optimized through the Augmented Lagrangian Method (ALM).
- fRIS Element Position Optimization: This critical step utilizes a Majorization-Minimization (MM) framework. High-order terms are linearized using Taylor expansions and linear-difference forms, making the problem tractable. A "circle packing" initialization strategy is employed to prevent physical collisions between movable elements.
Performance Evaluation
The proposed fRIS scheme was evaluated against several benchmarks, including conventional fixed RIS with the same number of elements (Conven SameNum) and dense fixed RIS with half-wavelength spacing (Conven HWL).
Numerical results indicate that the fRIS significantly outperforms conventional static RIS. Specifically, an fRIS with only 25 elements can match the performance of a dense static array containing 81 elements, demonstrating high hardware efficiency. The AM-based algorithm shows robust convergence, typically stabilizing within 20 iterations. Furthermore, the results highlight that joint optimization of both position and phase is essential, as it yields substantially lower objective function values compared to optimizing either parameter in isolation.
Conclusion and Future Directions
The integration of fluid RIS into ISAC systems provides a promising pathway for 6G, trading mechanical flexibility for reduced hardware complexity and improved performance. While the current study assumes Line-of-Sight (LoS) channels, future research will explore fRIS performance in rich-scattering environments and develop robust optimization techniques to account for mechanical inaccuracies in element positioning. Additionally, exploring "beyond diagonal" RIS architectures in tandem with movable elements remains a compelling area for further investigation.
Summary updated