Joint Beamforming and 3D Location Optimization for Multi-User Holographic UAV Communications

Chandan Kumar Sheemar, Asad Mahmood, Christo Kurisummoottil Thomas, George C. Alexandropoulos, Jorge Querol, Symeon Chatzinotas, Walid SaadarXiv 2025 · DOI · arXiv

TL;DR

This paper introduces a novel framework for 6G aerial networks by equipping UAVs with Reconfigurable Holographic Surfaces (RHS) instead of bulky traditional antennas. By jointly optimizing the drone's 3D position and its hybrid beamforming patterns, the researchers achieved significant boosts in network data rates while maintaining the low-power, lightweight profile essential for drone operations.

What Problem Does This Paper Address?

As we look toward 6G, Unmanned Aerial Vehicles (UAVs) are expected to act as "flying base stations" to provide on-demand connectivity. However, two major hurdles remain: energy constraints and hardware weight.

Traditional Phased Array Antennas (PAAs) require complex, power-hungry phase-shifting circuits and heavy hardware. This paper proposes using Reconfigurable Holographic Surfaces (RHS). Unlike PAAs, an RHS uses a feed mechanism to generate a reference wave that interacts with a metasurface. By modulating the "holographic pattern" on this surface, the drone can steer highly directional beams with much lower power consumption and a thinner, lighter physical profile.

The core challenge the authors tackle is the "joint optimization problem": finding the mathematical "sweet spot" where the drone’s 3D location, its digital processing, and its holographic surface patterns all work together to maximize the total data rate (sum-rate) for multiple ground users.

Methods

The authors propose a hybrid beamforming architecture that combines low-dimensional digital beamforming (at the baseband) with large-dimensional holographic beamforming (at the metasurface). To solve the complex, non-convex optimization problem, they developed an Iterative Alternating Optimization (AO) algorithm:

  1. Digital Beamforming: Uses a Zero-Forcing (ZF) approach to cancel out interference between different users.
  2. Holographic Beamforming: Employs a Gradient Ascent technique to optimize the real-valued weights of the holographic elements, ensuring they stay within physical limits (0 to 1).
  3. 3D Position Optimization: This is a highlight of the paper. The authors derived an exact gradient for the UAV's 3D movement. Unlike previous works that simplified the drone's movement, this model accounts for the specific response of a Uniform Planar Array (UPA), path loss, and angular variations (elevation and azimuth) simultaneously.

Datasets

This study relies on numerical simulations rather than a static external dataset.

  • Setup: 100 random realizations of ground users in a $100m \times 100m$ area.
  • Parameters: Carrier frequency of 30 GHz (mmWave), UAV altitude bounds of 10m to 50m, and RHS sizes of $8 \times 8$ (64 elements) and $10 \times 10$ (100 elements).
  • Benchmarks: The "Proposed" method was compared against a "Benchmark" scheme where digital beamforming and positioning are optimized, but holographic amplitudes are selected randomly.

Key Insights and Ideas

  • Holography vs. Phase Shifting: The paper shifts the paradigm from controlling phase shifts to controlling the amplitude of a holographic interference pattern. This is computationally different and hardware-efficient.
  • The "Center of Gravity" Effect: In 2-user scenarios, the optimization naturally drives the UAV to a point equidistant from both users to balance path loss. In 4-user scenarios, the UAV intelligently maneuvers toward regions with higher user density to maximize the collective signal strength.
  • Monotonic Convergence: The proposed algorithm is designed to ensure that the network sum-rate increases (or stays the same) at every single iteration, guaranteeing that the system eventually settles on a locally optimal configuration.

Key Results

  • Significant Sum-Rate Gains: The proposed joint optimization consistently outperformed the benchmark. For example, at an SNR of 30dB with 100 holographic elements, the proposed method achieved a sum-rate of approximately 43 bps/Hz, compared to significantly lower values for the random-weight benchmark.
  • Scalability: Increasing the number of holographic elements ($M$) from 64 to 100 provided a clear performance boost, proving that higher-resolution metasurfaces translate directly to better interference management and beam gain.
  • Robustness at Low SNR: Even in "noisy" environments (low SNR), the joint optimization managed to maintain a functional sum-rate by leveraging the directional gain of the RHS, whereas simpler systems struggled with inter-user interference.

Limitations and Future Work

  • Perfect CSI Assumption: The study assumes the UAV has perfect Channel State Information (CSI). In the real world, channel estimation for holographic surfaces is notoriously difficult due to the high number of elements.
  • Static Users: The current model treats ground users as stationary. Future work could extend this to trajectory optimization, where the UAV must track moving users in real-time.
  • Energy vs. Rate: While RHS is low-power, the paper focuses on maximizing the data rate. A multi-objective optimization that explicitly balances data rate against the drone's propulsion energy would be a logical next step for long-endurance missions.

Summary updated

Abstract

This paper pioneers the field of multi-user holographic unmanned aerial vehicle (UAV) communications, laying a solid foundation for future innovations in next-generation aerial wireless networks. The study focuses on the challenging problem of jointly optimizing hybrid holographic beamforming and 3D UAV positioning in scenarios where the UAV is equipped with a reconfigurable holographic surface (RHS) instead of conventional phased array antennas. Using the unique capabilities of RHSs, the system dynamically adjusts both the position of the UAV and its hybrid beamforming properties to maximize the sum rate of the network. To address this complex optimization problem, we propose an iterative algorithm combining zero-forcing digital beamforming and a gradient ascent approach for the holographic patterns and the 3D position optimization, while ensuring practical feasibility constraints. The algorithm is designed to effectively balance the trade-offs between power, beamforming, and UAV trajectory constraints, enabling adaptive and efficient communications, while assuring a monotonic increase in the sum-rate performance. Our numerical investigations demonstrate that the significant performance improvements with the proposed approach over the benchmark methods, showcasing enhanced sum rate and system adaptability under varying conditions.
BibTeX
@misc{sheemar2025joint,
  author = {Chandan Kumar Sheemar and Asad Mahmood and Christo Kurisummoottil Thomas and George C. Alexandropoulos and Jorge Querol and Symeon Chatzinotas and Walid Saad},
  title = {{Joint Beamforming and 3D Location Optimization for Multi-User Holographic UAV Communications}},
  year = {2025},
  eprint = {2502.17428},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2502.17428},
  howpublished = {arXiv},
}
Figure