Joint ADS-B in 5G for Hierarchical Aerial Networks: Performance Analysis and Optimization

Ziye Jia, Yiyang Liao, Chao Dong, Lijun He, Qihui Wu, Lei ZhangPIMRC 2024 · DOI · OpenReview

Abstract

Unmanned aerial vehicles (UAVs) are widely applied in multiple fields, which emphasizes the challenge of obtaining UAV flight information to ensure the airspace safety. UAVs equipped with automatic dependent surveillance-broadcast (ADS-B) devices are capable of sending flight information to nearby aircrafts and ground stations (GSs). However, the saturation of limited frequency bands of ADS-B leads to interferences among UAVs and impairs the monitoring performance of GS to civil planes. To address this issue, the integration of the 5th generation mobile communication technology (5G) with ADS-B is proposed for UAV operations in this paper. Specifically, a hierarchical structure is proposed, in which the high-altitude central UAV is equipped with ADS-B and the low-altitude central UAV utilizes 5G modules to transmit flight information. Meanwhile, based on the mobile edge computing technique, the flight information of sub-UAVs is offloaded to the central UAV for further processing, and then transmitted to GS. We present the deterministic model and stochastic geometry based model to build the air-to-ground channel and air-to-air channel, respectively. The effectiveness of the proposed monitoring system is verified via simulations and experiments. This research contributes to improving the airspace safety and advancing the air traffic flow management.

Introduction

As unmanned aerial vehicles (UAVs) become ubiquitous, the systems used to track them are reaching a breaking point. Currently, aircraft rely on Automatic Dependent Surveillance-Broadcast (ADS-B) to broadcast positions on the 1090 MHz frequency. While reliable, this bandwidth is limited. If thousands of small UAVs simultaneously broadcast on this frequency, they risk drowning out signals from civil airliners, leading to packet collisions and monitoring blind spots.

While 5G offers massive bandwidth and low latency, it is not yet integrated into global air traffic control. This paper proposes a hybrid solution: a hierarchical aerial network that leverages both 5G and ADS-B to scale UAV monitoring without compromising aviation safety.

Hierarchical Network Architecture

The proposed system organizes UAVs into a two-layer hierarchy to manage frequency saturation:

  1. High-Altitude Layer ($V_h$): A central UAV equipped with ADS-B communicates directly with Ground Stations (GS).
  2. Low-Altitude Layer ($V_l$): A central UAV utilizes 5G modules to transmit aggregated data.
Hierarchical aerial network structure showing high-altitude (ADS-B) and low-altitude (5G) layers.

In this model, "sub-UAVs" do not communicate directly with the ground. Instead, they offload data to "Central UAVs" acting as hubs. These hubs utilize Mobile Edge Computing (MEC) to process flight information locally.

Technical Methodology

The researchers employed a dual-modeling approach to characterize the complex communication environment:

  • Air-to-Ground (A2G) Links: A deterministic curved-earth multi-ray (CEMR) model was used to account for the earth's curvature and signal reflections. Analysis showed that while Rice fading is significant at low altitudes, the signal stabilizes as the central UAV rises above 4 km.
  • Air-to-Air (A2A) Links: Stochastic Geometry (Poisson Point Process) was used to model interference between swarms. Findings indicate that when UAV density exceeds ~30 units in a local area, the Signal-to-Interference-plus-Noise Ratio (SINR) drops toward 0 dB, defining a clear capacity limit.

MEC-Based Data Optimization

To reduce bandwidth consumption, Central UAVs run an algorithm based on Minkowski distance to:

  • Filter Redundancy: Packets that do not provide new movement information are abandoned to save bandwidth.
  • Supplement Data: If packets are lost due to interference, the system uses weighted averages of previous positions to "fill in the blanks," ensuring trajectory continuity.

Experimental Results and Analysis

The system was validated using a testbed featuring SIM8262E-M2 5G modules, PT050X ADS-B devices, and Raspberry Pi 4B units.

Data Efficiency and Trajectory Smoothing

Real-world testing demonstrated that the MEC algorithm successfully filtered out 52.55% of redundant packets. Furthermore, the system reconstructed broken flight paths by adding supplementary packets, transforming jittery data into continuous trajectories.

Coverage and Power Optimization

Simulation results for coverage probability highlight an "energy-efficient" sweet spot. As shown in the figure below, increasing transmission power beyond 16W yields diminishing returns in coverage probability across various SINR thresholds ($\theta$).

Coverage probability vs. transmitting power of sub-UAVs for various SINR thresholds.

Conclusion

This research demonstrates that 5G can serve as a high-capacity "sidecar" for low-altitude UAV operations, reserving ADS-B for high-altitude coordination. By processing data at the "edge," the system significantly reduces the load on ground stations. Future work will focus on optimizing the energy consumption of 5G modules and MEC processing to extend UAV battery life.

Summary updated

Abstract

Unmanned aerial vehicles (UAVs) are widely applied in multiple fields, which emphasizes the challenge of obtaining UAV flight information to ensure the airspace safety. UAVs equipped with automatic dependent surveillance-broadcast (ADSB) devices are capable of sending flight information to nearby aircrafts and ground stations (GSs). However, the saturation of limited frequency bands of ADS-B leads to interferences among UAVs and impairs the monitoring performance of GS to civil planes. To address this issue, the integration of the 5th generation mobile communication technology (5G) with ADS-B is proposed for UAV operations in this paper. Specifically, a hierarchical structure is proposed, in which the high-altitude central UAV is equipped with ADS-B and the low-altitude central UAV utilizes 5G modules to transmit flight information. Meanwhile, based on the mobile edge computing technique, the flight information of sub-UAVs is offloaded to the central UAV for further processing, and then transmitted to GS. We present the deterministic model and stochastic geometry based model to build the air-to-ground channel and air-to-air channel, respectively. The effectiveness of the proposed monitoring system is verified via simulations and experiments. This research contributes to improving the airspace safety and advancing the air traffic flow management.
BibTeX
@inproceedings{jia2024joint,
  author = {Ziye Jia and Yiyang Liao and Chao Dong and Lijun He and Qihui Wu and Lei Zhang},
  title = {{Joint ADS-B in 5G for Hierarchical Aerial Networks: Performance Analysis and Optimization}},
  booktitle = {PIMRC},
  year = {2024},
  doi = {10.48550/arxiv.2405.00733},
}
Figure