Jellyfish-Inspired Soft Robot Driven by Fluid Electrode Dielectric Organic Robotic Actuators

Caleb Christianson, Christopher Bayag, Guorui Li, Saurabh Jadhav, Ayush Giri, Chibuike Agba, Tiefeng Li, Michael T. TolleyFrontiers in Robotics and AI 2019 · DOI

TL;DR

This paper presents a novel jellyfish-inspired soft robot that uses fluid electrode dielectric organic robotic actuators (FEDORAs) for silent, low-power underwater locomotion. By mimicking the efficient swimming strategy of jellyfish and employing a unique actuator design, the robot achieves untethered swimming, paving the way for less disruptive underwater exploration.

What Problem Does This Paper Address?

Traditional underwater robots, often built from rigid materials and propelled by noisy propellers or jet thrusters, face several limitations. Their significant power consumption necessitates large batteries, limiting miniaturization. The noise and vibration they generate are detrimental for studying sensitive marine life or conducting acoustic research. Furthermore, rigid robots pose a risk to delicate underwater environments. Soft robotics offers a promising alternative, enabling robots to adapt better to their surroundings and interact more safely. While previous work explored soft robots with dielectric elastomer actuators (DEAs), achieving untethered, efficient, and silent locomotion remained a challenge. This paper addresses the need for a soft, untethered robot that can swim efficiently and silently, inspired by the natural elegance and energy conservation of jellyfish.

Methods

The core innovation lies in the design and application of Fluid Electrode Dielectric Organic Robotic Actuators (FEDORAs). These actuators consist of a dielectric elastomer membrane sandwiched between two conductive fluid electrodes. When a voltage is applied, electrostatic forces cause the membrane to deform. Crucially, the researchers developed a "frameless" DEA approach, eliminating the need for rigid frames to maintain strain.

For this jellyfish robot, they created a unimorph actuator structure by combining an active DEA layer with a passive, strain-limiting layer. This configuration causes the actuator to bend when voltage is applied, mimicking the pulsing action of a jellyfish bell. To achieve untethered operation, they developed a compact, waterproof high-voltage power supply integrated onto the robot. The robot's design draws inspiration from jellyfish locomotion, utilizing an axisymmetric array of these FEDORAs. They also incorporated a swim bladder for buoyancy control.

A key aspect of their method involves using a mechanical model to optimize actuator dimensions and a fluid dynamic analysis of jellyfish locomotion to guide their design choices, particularly regarding actuation frequency.

Datasets

Not discussed in the paper. The experiments involved custom-fabricated actuators and robots, with data collected through video analysis and direct measurements of force, deflection, and speed.

Key Insights and Ideas

  • Fluid Electrodes for Silent, Compliant Actuation: Using conductive fluids (like tap water) as electrodes eliminates the stiffness and complexity associated with solid electrodes, enabling truly soft and silent actuation. This is a significant advantage for bio-inspired robotics and sensitive environments.
  • Jellyfish-Inspired Unimorph Actuators: The unimorph design, combining an active DEA with a passive strain-limiting layer, effectively mimics the power stroke and passive recovery of a jellyfish bell, simplifying control and enabling efficient propulsion.
  • Prestrain without Rigid Frames: The paper demonstrates a clever method of imparting prestrain to the DEA by using the inherent curvature of its backing liner. This enhances actuator performance without requiring rigid frames, a common limitation in DEA applications.
  • Untethered, Low-Power Underwater Locomotion: The successful integration of a compact power supply and FEDORAs allows for untethered, silent swimming, a critical step towards practical underwater soft robots.
  • Cost of Transport (COT) as a Key Metric: The paper emphasizes COT as a measure of locomotion efficiency, highlighting that jellyfish are exceptionally efficient. Their robot achieves a significantly lower COT than traditional soft robots, approaching the efficiency of some biological swimmers.

Key Results

  • Actuator Performance: The actuators achieved a maximum deflection of 10 mm and a maximum force of 6.1 mN.
  • Tethered Swimming: The tethered robot achieved a maximum speed of 1.8 mm/s with a Cost of Transport (COT) of 260.
  • Untethered Swimming: The untethered robot achieved an average speed of 3.2 mm/s with a COT of 35.
  • Power Consumption: The untethered robot consumed an average of 0.25 W, with an estimated battery life of 2.7 hours for a 180 mAh battery.
  • Silent Operation: The FEDORA actuators operate silently, a stark contrast to propeller-driven robots.

Limitations and Future Work

  • Speed Limitations: The achieved speeds (1.8 mm/s tethered, 3.2 mm/s untethered) are significantly slower than natural jellyfish of similar size. This limits their applicability in high-flow or high-speed environments.
  • Efficiency Gap: While improved, the robot's COT is still considerably higher than that of natural jellyfish.
  • Lack of Advanced Control: The current robot primarily relies on a simplified swimming strategy. Future work will focus on incorporating sensors and developing more sophisticated control for programmable and lateral movement.
  • Actuator Optimization: Further optimization of actuator layer thicknesses and the use of thicker passive layers could potentially increase force and speed.
  • Prestrain Model: The current mechanical model does not fully account for the prestrain introduced by the liner, leading to discrepancies between model predictions and experimental results.

The authors envision future work focusing on improving speed, efficiency, and incorporating advanced sensing and control capabilities to enable more complex underwater missions.

Summary updated

Abstract

Robots for underwater exploration are typically comprised of rigid materials and driven by propellers or jet thrusters, which consume a significant amount of power. Large power consumption necessitates a sizeable battery, which limits the ability to design a small robot. Propellers and jet thrusters generate considerable noise and vibration, which is counterproductive when studying acoustic signals or studying timid species. Bioinspired soft robots provide an approach for underwater exploration in which the robots are comprised of compliant materials that can better adapt to uncertain environments and take advantage of design elements that have been optimized in nature. In previous work, we demonstrated that frameless DEAs could use fluid electrodes to apply a voltage to the film and that effective locomotion in an eel-inspired robot could be achieved without the need for a rigid frame. However, the robot required an off-board power supply and a non-trivial control signal to achieve propulsion. To develop an untethered soft swimming robot powered by DEAs, we drew inspiration from the jellyfish and attached a ring of frameless DEAs to an inextensible layer to generate a unimorph structure that curves toward the passive side to generate power stroke, and efficiently recovers the original configuration as the robot coasts. This swimming strategy simplified the control system and allowed us to develop a soft robot capable of untethered swimming at an average speed of 3.2 mm/s and a cost of transport of 35. This work demonstrates the feasibility of using DEAs with fluid electrodes for low power, silent operation in underwater environments.
BibTeX
@inproceedings{christianson2019jellyfish,
  author = {Caleb Christianson and Christopher Bayag and Guorui Li and Saurabh Jadhav and Ayush Giri and Chibuike Agba and Tiefeng Li and Michael T. Tolley},
  title = {{Jellyfish-Inspired Soft Robot Driven by Fluid Electrode Dielectric Organic Robotic Actuators}},
  booktitle = {Frontiers in Robotics and AI},
  year = {2019},
  doi = {10.3389/frobt.2019.00126},
}
Figure