TL;DR
This study investigates how varying ground stress levels impact the physical and mechanical properties of gneiss, a common rock in underground engineering. The findings reveal that high geostress enhances pre-peak strength and stiffness but weakens post-peak behavior, leading to more brittle failure. This research provides crucial insights for designing safer and more stable underground structures in high-stress gneiss environments.
What Problem Does This Paper Address?
Underground engineering projects, such as tunnels and mines, are increasingly being constructed in complex geological conditions, including areas with high ground stress. Gneiss, a prevalent rock type in these environments, exhibits significant changes in its physical and mechanical properties under such conditions. However, a comprehensive understanding of how different initial geostress levels specifically influence the behavior of gneiss, particularly its failure modes and mechanical response, remains a critical research gap. Ignoring these geostress-induced changes can lead to instability and safety concerns in underground constructions. This paper aims to fill this gap by systematically analyzing the effects of high geostress on gneiss properties.
Methods
The researchers conducted a series of physical and mechanical tests on gneiss samples collected from two distinct geological environments: a deep-buried section with high in-situ stress and a shallow-buried section with conventional stress.
The methodology involved:
- Physical Property Tests: Measuring volumetric weight and longitudinal wave velocity of gneiss samples under both high and conventional geostress conditions.
- Uniaxial Compression Tests: Applying axial loads to cylindrical gneiss specimens until failure using an RMT-150 rock test system. Longitudinal wave velocity was measured before and after failure.
- Triaxial Compression Tests: Subjecting gneiss samples to varying confining pressures (5, 10, 15, 20, and 25 MPa) using a WDT-1500 multifunctional material testing machine to simulate different stress states.
The tests were designed to analyze stress-strain curves, determine key mechanical parameters (yield strength, peak strength, residual strength, elastic modulus), and observe failure modes.
Datasets
The study utilized gneiss samples collected from a tunnel site on the Baohan Expressway in Hanzhong City, Shaanxi Province, China. Samples were categorized into two groups based on their in-situ stress environment:
- High Geostress Group (G-series): Collected from a deep-buried section (approx. 950 m depth) with high in-situ stress.
- Conventional Geostress Group (C-series): Collected from a shallow-buried section (approx. 150 m depth) with conventional stress.
No new benchmark datasets were introduced; the study relied on in-situ rock samples.
Key Insights and Ideas
- Geostress as a "Compactor": High geostress appears to "compact" gneiss, leading to increased volumetric weight and longitudinal wave velocity. This suggests a denser internal structure and fewer defects under high stress.
- Pre-Peak Strength Boost, Post-Peak Weakness: The most striking finding is that high geostress significantly improves gneiss's resistance to deformation before it reaches its peak strength (higher yield and peak strength, increased elastic modulus). However, after reaching peak strength, the rock's ability to withstand further stress diminishes more rapidly, leading to lower residual strength and more severe damage.
- Brittle Transformation: High geostress shifts the failure mode of gneiss from ductile (plastic) failure to brittle failure. This is characterized by more extensive fracturing, smoother fracture surfaces, and a tendency for the rock to break into more debris.
- Energy Release and Secondary Damage: The paper suggests that high geostress stores more energy within the gneiss. Upon failure, this stored energy is released, causing secondary damage and contributing to the more pronounced brittle failure observed.
- Confining Pressure Amplifies Effects: The influence of confining pressure on gneiss behavior is amplified under high geostress conditions, particularly in terms of pre-peak deformation resistance and post-peak stress loss.
Key Results
- Physical Properties: High geostress increased volumetric weight by 0.49% and longitudinal wave velocity by 13.17% compared to conventional geostress.
- Mechanical Properties (Uniaxial):
- Yield strength increased by 30.32% and peak strength by 19.51% under high geostress.
- Residual strength decreased by 7.75% under high geostress.
- Elastic modulus increased by 10% under high geostress.
- Failure Mode (Uniaxial): High geostress resulted in tension-shear composite failure (brittle), with main fracture surfaces at ~30° to the loading direction. Conventional geostress led to shear failure (plastic), with fracture surfaces at ~20°.
- Mechanical Properties (Triaxial): Under triaxial conditions, high geostress consistently showed higher yield strength, peak strength, and elastic modulus across all confining pressures. However, residual strength was lower in high geostress conditions. Stress loss after peak load was also significantly greater in high geostress gneiss.
- Brittleness: Brittleness was observed to increase with higher confining pressure in high geostress areas.
Limitations and Future Work
- Limited Sample Scope: The study focused on gneiss from a specific location. While representative, the findings might not be universally applicable to all gneiss types or geological settings.
- Focus on Static Loading: The tests primarily involved static loading conditions. The behavior of gneiss under dynamic loading (e.g., seismic events) in high geostress environments was not explored.
- Future Work Suggestions: The authors suggest that their findings can inform the design and optimization of underground engineering support systems in high geostress gneiss strata. They also propose using the observed changes in wave velocity and failure modes as indicators for geological prediction and lithology assessment in high-stress areas. Further research could explore the dynamic mechanical properties and long-term creep behavior of gneiss under high geostress.
Summary updated