Investigation on Formability of Sintering PP Part by Selective Laser Sintering
Lists
Only you see this
Abstract
The forming of PP powder was explored by selective laser sintering (SLS) through HRPS-Ⅲ Rapid Prototyping system. The effects of laser power, scanning speed and the thickness of single layer on the warp deformation of PP parts were studied. The results showed that the warp deformation decreased with decrease of the laser power and increased with the increase from 0.15mm of the thickness of single layer. With the change of scanning speed, the size tolerance of the PP part exhibited a minimum. When the laser power was 12.5W, scanning speed 1800mm/s and thickness of single layer 0.15mm,the PP powder could be sintered to manufacture part, with warp value of 0.22mm.
BibTeX
@inproceedings{zheng2006investigation,
author = {Haizhong Zheng},
title = {{Investigation on Formability of Sintering PP Part by Selective Laser Sintering}},
booktitle = {China},
year = {2006},
}Loading related content...