INVESTIGATION OF THE INFLUENCE OF ELECTROMAGNETIC FIELD AND ENERGY-MECHANICAL PROCESSING ON THE PRODUCTION OF METALLIC COBALT NANOPOWDER BY HYDROGEN REDUCTION

Van Minh Nguyen, Yu. V. Konyukhov, D. I. RyzhonkovIzvestiya 2018 · DOI

Abstract

Nanopowders (NP) based on cobalt have significant prospects for use in various fields of science, engineering, industry and medicine. In this work the authors have studied the kinetics of the production of metallic cobalt nanopowder by hydrogen reduction of oxide material Co 3 O 4 in an electromagnetic field, an d with an energy-mechanical pro cessing (EMP) in eddy layer created by ferromagnetic bodies subjected to such field. Cobalt oxide Co 3 O 4 N P was obtained by thermal decom position of the hydroxide compound Co(OH) 2 chemical-precipitated from 10 % aqueous solutions of nitrate cobalt Co(NO 3 ) 2 and sodium hydroxide NaOH under the conditions of pH = 9 and t = 20 °C. The production of metallic cobalt nanoparticles by the hydr ogen reduc tion of Co 3 O 4 NP was carried out on the apparatus of eddy layer (AED) of UAP-3 model modified with an internal hea ting furnace and a flow reactor . The amplitude value of induction of magnetic field inside the reactor was 0.16 T. The experimental temperatures of the reduction process were chosen based on the result of a thermo gravimetric analysis (TGA) of the initial cobalt hydroxide sample. The kinetic parameters of hydroge n reduction processes under li near heating and in isothermal conditions were calculated using the Freeman-Carroll and McKewan models, respectively. The authors have found a decrease in the rate of obtaining Co nanopowder in the electromagnetic field (up to 14 % at 250 °C) due to the decrease in the adsorption ability of hydrogen atoms on the surface of the formed metallic nanoparticles. EMP in the eddy layer leads to an increase in the reduction rate by 4 – 5 times due to the effect of mechanical activation of the material. The properties of the initial material and the obtained products were investigated using the methods of thermogra vimetry, X-ray diffractometry, electron microscopy and measurement of the specific surface area by low-temperature nitrogen adsorption. It was shown that reduction of the samples in the electromagnetic field facilitate the formation of mo re finer-dispersed Co nanoparti cles, than in the case without the field. The EMP in the eddy layer leads to the aggregation of the formed metallic nanoparticles and the formation of granules of micron size.
BibTeX
@inproceedings{nguyen2018investigation,
  author = {Van Minh Nguyen and Yu. V. Konyukhov and D. I. Ryzhonkov},
  title = {{INVESTIGATION OF THE INFLUENCE OF ELECTROMAGNETIC FIELD AND ENERGY-MECHANICAL PROCESSING ON THE PRODUCTION OF METALLIC COBALT NANOPOWDER BY HYDROGEN REDUCTION}},
  booktitle = {Izvestiya},
  year = {2018},
  doi = {10.17073/0368-0797-2018-2-96-101},
}

Loading related content...

Figure