Abstract: When pressurized, the heavy fermion compound $\text{CeNiC}_2$ reveals a rich electronic phase diagram and shows unconventional superconductivity with a transition temperature $T_c \approx 3.7\text{ K}$, the highest among Ce-based heavy fermion superconductors. Understanding the appearance of superconductivity in the vicinity of the magnetic quantum critical point is still lacking. Given that the physical properties of $\text{CeNiC}_2$ are sensitive to subtle changes in interatomic distances, information on atomic coordinates may offer essential insights into local lattice arrangements and the mechanisms behind exotic phase transitions. To find a correlation between local lattice environments and physical properties, we investigate its crystal structure from ambient pressure to 18.6 GPa via single-crystal X-ray diffraction. The pressure dependence of lattice parameters reveals anisotropic linear compressibility following $|\kappa_a| > |\kappa_c| > |\kappa_b|$, and a large bulk modulus $B_0 \approx 134\text{ GPa}$. Although atomic coordinates remain relatively stable, the directions of the first and second nearest neighbors for both Ce-Ce and Ni-Ni atoms switch at $\sim 7\text{ GPa}$. Notably, this is the same pressure where the antiferromagnetic ordering temperature reaches its maximum. Our results suggest that this nearest-neighbor interchange may play a key role in the suppression of magnetic order and the enhancement of the Kondo effect.
Introduction
In condensed matter physics, heavy fermion compounds serve as a primary platform for studying exotic states of matter, including quantum criticality and unconventional superconductivity. $\text{CeNiC}_2$ is of particular interest because it exhibits the highest superconducting transition temperature ($T_c \approx 3.7\text{ K}$) among Cerium-based heavy fermion materials under pressure.
The electronic properties of these materials are governed by a delicate competition between the RKKY interaction, which promotes magnetic order, and the Kondo effect, which suppresses it. Both interactions are hyper-sensitive to interatomic distances. However, measuring precise atomic coordinates within a high-pressure diamond anvil cell (DAC) is notoriously difficult. This study provides a high-precision structural map of $\text{CeNiC}_2$ up to 18.6 GPa to bridge this knowledge gap.
Experimental Methods
High-quality $\text{CeNiC}_2$ single crystals were grown using the Czochralski pulling method. To probe the structure under extreme conditions, the researchers utilized a Diamond Anvil Cell (DAC) to reach pressures nearly 200,000 times atmospheric pressure. Single-crystal X-ray diffraction (XRD) patterns were captured using a laboratory Mo-K$\alpha$ radiation source. The crystal structure was refined using the SHELXL software suite, allowing for the tracking of lattice constants ($a, b, c$) and internal atomic coordinates ($x, y, z$) for Ce, Ni, and C atoms.
Results and Discussion
Anisotropic Lattice Compression
The crystal structure of $\text{CeNiC}_2$ (space group $Amm2$) consists of $\text{NiC}_2$ layers in the $bc$-plane separated by Cerium atoms. A primary finding of this study is the highly anisotropic nature of the material's compressibility.
As shown in Figure 1, the $a$-axis is significantly more compressible than the $b$ or $c$ axes. The linear compressibility follows the relationship $|\kappa_a| (3.70\times10^{-3} \text{ GPa}^{-1}) > |\kappa_c| (1.97\times10^{-3} \text{ GPa}^{-1}) > |\kappa_b| (1.39\times10^{-3} \text{ GPa}^{-1})$. This anisotropy is attributed to the "stiffness" of the $\text{NiC}_2$ layers in the $bc$-plane, which resist compression more effectively than the gaps between layers along the $a$-axis. The measured bulk modulus ($B_0 \approx 134\text{ GPa}$) indicates a relatively stiff material overall.
The 7 GPa "Neighbor Swap"
The most striking discovery is the "switching" of neighbor directions at approximately 7 GPa. While the internal atomic coordinates remain relatively stable, the rapid compression of the $a$-axis causes a reordering of the local lattice environment.
At ambient pressure, the first nearest neighbor (FNN) for a given Cerium atom is located within the $bc$-plane. However, because the $a$-axis compresses so much faster, by 7 GPa, the Cerium atom in the adjacent layer (along the $a$-axis) becomes the closest neighbor. As illustrated in Figure 6, the distances for both Ce-Ce and Ni-Ni pairs cross at this critical pressure point.
This 7 GPa mark is significant because it coincides perfectly with the pressure where the antiferromagnetic ordering temperature ($T_{ICAF}$) reaches its maximum in the electronic phase diagram. This suggests that the "neighbor swap" strengthens inter-plane magnetic exchange until it begins to compete with in-plane interactions, eventually leading to the suppression of magnetism and the emergence of superconductivity at higher pressures.
Conclusion
This study demonstrates that the exotic electronic properties of $\text{CeNiC}_2$ under pressure are intimately linked to subtle structural changes. The discovery of the nearest-neighbor direction switch at 7 GPa provides a structural basis for the observed peak in magnetic ordering. Future work involving synchrotron XRD or neutron diffraction could further refine the positions of light elements like Carbon and directly probe the magnetic moment orientations relative to these structural shifts.
Summary updated