Inverse Transformation Optics and Reflection Analysis for Two-Dimensional Finite-Embedded Coordinate Transformation

Pu Zhang, Yi Jin, Sailing HeIEEE Journal of Selected Topics in Quantum Electronics 2010 · DOI · arXiv

Abstract

Inverse transformation optics is introduced and used to calculate the reflection at the boundary of a transformation medium under consideration. The transformation medium for a practical device is obtained from a 2-D finite-embedded coordinate transformation (FECT), which is discontinuous at the boundary. For an electromagnetic excitation of particular polarization, many pairs of original medium (in a virtual space $V'$) and inverse transformation can give exactly the same anisotropic medium through the conventional procedure of transformation optics. Nonuniqueness of these pairs is then exploited for the analysis and calculation of the boundary reflection. The reflection at the boundary of the anisotropic FECT medium (associated with the corresponding vacuum virtual space $V$) is converted to the simple reflection between two isotropic media in virtual space $V'$ by a selected inverse transformation continuous at the boundary. A reflectionless condition for the boundary of the FECT medium is found as a special case. The theory is verified numerically with the finite element method.

Introduction

Transformation Optics (TO) provides a powerful mathematical framework for designing materials that can control electromagnetic waves in unprecedented ways, enabling applications like invisibility cloaks and wave-steering devices. TO works by mapping a simple "virtual space" (typically vacuum) to a "physical space" filled with complex, anisotropic, and inhomogeneous materials.

A significant challenge in practical implementations is the Finite Embedded Coordinate Transformation (FECT). Unlike idealized theoretical models, practical FECT devices often involve coordinate transformations that are discontinuous at the interface with the surrounding environment. These discontinuities lead to unwanted electromagnetic reflections, which can severely degrade device performance. Calculating these reflections is traditionally complex due to the anisotropic nature of the materials. This work introduces "Inverse Transformation Optics" to simplify this analysis and derive conditions for reflectionless boundaries.

Methodology: Inverse Transformation Optics

The core innovation of this research is the reversal of the standard TO approach. Instead of mapping from a virtual space to a physical material, the authors propose mapping the physical anisotropic material back into a carefully chosen virtual space ($V'$).

Schematic of the inverse transformation mapping process between virtual and physical spaces.

The method relies on the non-uniqueness of the mapping between an anisotropic medium and a virtual space. Multiple combinations of an "original medium" and a "transformation" can yield the same physical material. By exploiting this freedom, the authors select a specific inverse transformation that remains continuous at the boundary. This choice mathematically transforms the complex reflection problem at the physical boundary into a much simpler Fresnel reflection between two isotropic media in the virtual space $V'$. For reflection analysis, a "local view" is adopted, where the boundary is linearized using a Taylor expansion, treating the medium as locally homogeneous.

Results and Discussion

The analytical framework led to the derivation of an explicit reflectionless condition for FECT media. For a 2D system, the boundary is reflectionless for any incidence angle if the Jacobian matrix elements ($j_{ab}$) of the transformation satisfy: $$\frac{j_{xx}^2 + j_{xy}^2}{(j_{xx}j_{yy} - j_{xy}j_{yx})^2} = j_{zz} = 1$$

To validate this, the authors used 2D Finite Element Method (FEM) simulations. Figure 3 illustrates the relationship between the deviation ($\delta$) from the ideal reflectionless condition and the resulting reflection coefficient ($|R|$).

Norm of reflection coefficient |R| and original medium permittivity as a function of deviation $\delta$.

As shown in the plot, when $\delta = 0$, the reflection coefficient drops to zero, confirming the theoretical prediction. When the condition is intentionally violated (e.g., $\delta = -0.25$), the theory accurately predicts the resulting reflection (e.g., $|R| \approx 0.5$), which matches numerical simulations.

Conclusion

This paper presents a robust method for analyzing and eliminating reflections at the boundaries of FECT-based transformation media. By utilizing inverse transformation optics and exploiting the non-uniqueness of coordinate mappings, complex anisotropic reflection problems are reduced to simpler isotropic ones. While currently focused on 2D TE polarization, the framework is generalizable to 3D systems and TM polarization, offering a valuable tool for the design of advanced electromagnetic devices such as beam shifters and rotators.

Summary updated

Abstract

Inverse transformation optics is introduced, and used to calculate the reflection at the boundary of a transformation medium under consideration. The transformation medium for a practical device is obtained from a 2-D finite-embedded coordinate transformation (FECT), which is discontinuous at the boundary. For an electromagnetic excitation of particular polarization, many pairs of original medium (in a virtual space <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">V</i> ') and inverse transformation can give exactly the same anisotropic medium through the conventional procedure of transformation optics. Nonuniqueness of these pairs is then exploited for the analysis and calculation of the boundary reflection. The reflection at the boundary of the anisotropic FECT medium (associated with the corresponding vacuum virtual space <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">V</i> ) is converted to the simple reflection between two isotropic media in virtual space <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">V</i> ' by a selected inverse transformation continuous at the boundary. A reflectionless condition for the boundary of the FECT medium is found as a special case. The theory is verified numerically with the finite element method.
BibTeX
@article{zhang2010inverse,
  author = {Pu Zhang and Yi Jin and Sailing He},
  title = {{Inverse Transformation Optics and Reflection Analysis for Two-Dimensional Finite-Embedded Coordinate Transformation}},
  journal = {IEEE Journal of Selected Topics in Quantum Electronics},
  year = {2010},
  doi = {10.1109/jstqe.2009.2031163},
}
Figure