Inverse orbital Hall effect and orbitronic terahertz emission observed in the materials with weak spin-orbit coupling

Ping Wang, Feng Zheng, Yuhe Yang, Delin Zhang, Quancheng Liu, Zedong Xu, Zhiyan Jia, Yong Wu, Guoqiang Yu, Xiaoguang Xu, Yong JiangarXiv 2023 · DOI · arXiv

Abstract

The Orbital Hall effect (OHE), originating in materials with weak spin-orbit coupling (SOC), has emerged as a compelling alternative to traditional spin-based phenomena for next-generation electronic applications. This paper demonstrates the inverse orbital Hall effect (IOHE) and the resulting orbitronic terahertz (THz) emission in light metals, specifically Titanium (Ti) and Manganese (Mn). By utilizing a ferromagnetic Cobalt (Co) layer as a source, we show that generated orbital currents can be converted into charge currents within Ti and Mn layers via the IOHE. Furthermore, the introduction of a Tungsten (W) interlayer significantly enhances THz emission by providing additional orbital-to-charge conversion pathways. Our findings demonstrate that the cooperation between the IOHE and the inverse spin Hall effect (ISHE) allows for the precise manipulation of THz signals, providing a foundation for efficient orbitronic devices and high-performance THz emitters.

Introduction

In the field of spintronics, the conversion between spin currents and charge currents is typically mediated by the Inverse Spin Hall Effect (ISHE) in heavy metals characterized by strong spin-orbit coupling (SOC), such as Platinum (Pt) or Tungsten (W). However, electrons also possess orbital angular momentum, which gives rise to the Orbital Hall Effect (OHE). While the OHE is often overshadowed by spin-related effects in heavy metals, it is remarkably potent in "light" metals where SOC is weak.

Until recently, the practical application of orbital currents was limited by the difficulty of converting them back into measurable charge currents—the Inverse Orbital Hall Effect (IOHE). This study addresses this gap by demonstrating that materials like Titanium (Ti) and Manganese (Mn) can efficiently facilitate IOHE, enabling the generation of "orbitronic" terahertz radiation.

Experimental Methodology

The researchers fabricated thin-film heterostructures using magnetron sputtering to investigate these effects. The primary configurations included:

  • Bilayers: Cobalt (Co) paired with Ti or Mn (e.g., Co/Ti, Co/Mn).
  • Trilayers: Co/W/Ti and Co/Ti/W, designed to study the interaction and stacking-order dependence of spin and orbital currents.

To characterize these materials, the team employed THz emission spectroscopy. A femtosecond laser pulse excites the ferromagnetic Co layer, generating a "superdiffusive" injection of both spin ($J_S$) and orbital ($J_L$) currents into the adjacent layers. As these currents enter the Ti or Mn layers, the IOHE converts the orbital momentum into a transient transverse charge current ($J_C$). This rapid charge displacement radiates a THz pulse, which is then detected using electro-optic sampling with a ZnTe crystal. By analyzing the polarity and amplitude of these pulses, the researchers could isolate the contributions of the orbital Hall effect.

Mechanisms of Orbitronic Emission

In these heterostructures, the Cobalt layer serves as the primary engine. Due to its internal spin-orbit correlation, Co efficiently generates the orbital currents required to drive the IOHE in the Ti/Mn layers.

A key discovery in this work is the role of Tungsten (W) as an orbital current amplifier. When a thin W layer is inserted between the Co and the light metal (Ti or Mn), it provides a massive boost to the THz signal—often exceeding an order of magnitude compared to simple bilayers. This enhancement occurs because the W layer generates an additional, large orbital current ($J_{L,W}$) that flows into the Ti/Mn layer, where it is converted to charge via the IOHE.

Furthermore, the researchers demonstrated that the stacking order allows for the manipulation of the THz pulse phase. By placing Ti between Co and W, the ISHE (from the W layer) and the IOHE (from the Ti layer) can be made to either cooperate or compete, allowing for precise control over the resulting electromagnetic waveform.

Key Results and Discussion

The experimental results provide several critical insights into the nature of orbital transport:

  1. Confirmation of IOHE: The observation of clear THz signals in Co/Ti and Co/Mn structures, with polarities consistent with orbital-to-charge conversion, confirms the existence of the IOHE in these light metals.
  2. Orbital Diffusion Lengths: The study extracted the orbital diffusion length ($\lambda_{OD}$) for these materials. Titanium exhibited a remarkably long $\lambda_{OD}$ of approximately 40 nm, suggesting that orbital information can be preserved over significant distances in light metals. In contrast, Manganese showed a much shorter diffusion length.
  3. Performance Enhancement: The Co/W/Ti trilayer structures outperformed standard spintronic bilayers, proving that hybrid orbitronic-spintronic architectures can achieve higher efficiency than traditional designs.
  4. Tunability: The THz amplitude was found to be highly dependent on the thickness of the light metal layer, with efficiency peaking at specific thicknesses (e.g., 10 nm for Ti), providing a clear path for device optimization.

Conclusion

This research successfully demonstrates that materials with weak spin-orbit coupling, previously overlooked in traditional spintronics, are highly effective for orbitronic applications. By harnessing the inverse orbital Hall effect in Ti and Mn, the authors have developed a new class of efficient THz emitters. Future work will likely focus on expanding the library of orbitronic materials—potentially including alloys or 2D materials—and integrating these emitters into compact devices for high-speed communication and medical imaging. The discovery of long orbital diffusion lengths and the ability to enhance signals via heavy-metal interlayers marks a significant step toward the realization of practical orbitronic technology.

Summary updated

Abstract

The Orbital Hall effect, which originates from materials with weak spin-orbit coupling, has attracted considerable interest for spin-orbitronic applications. Here, we demonstrate the inverse effect of the orbital Hall effect and observe orbitronic terahertz emission in the Ti and Mn materials. Through spin-orbit transition in the ferromagnetic layer, the generated orbital current can be converted to charge current in the Ti and Mn layers via the inverse orbital Hall effect. Furthermore, the inserted W layer provides an additional conversion of the orbital-charge current in the Ti and Mn layers, significantly enhancing the orbitronic terahertz emission. Moreover, the orbitronic terahertz emission can be manipulated by cooperating with the inverse orbital Hall effect and the inverse spin Hall effect in the different sample configurations. Our results not only discover the physical mechanism of condensed matter physics but also pave the way for designing promising spin-orbitronic devices and terahertz emitters.
BibTeX
@misc{wang2023inverse,
  author = {Ping Wang and Feng Zheng and Yuhe Yang and Delin Zhang and Quancheng Liu and Zedong Xu and Zhiyan Jia and Yong Wu and Guoqiang Yu and Xiaoguang Xu and Yong Jiang},
  title = {{Inverse orbital Hall effect and orbitronic terahertz emission observed in the materials with weak spin-orbit coupling}},
  year = {2023},
  eprint = {2305.05830},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2305.05830},
}
Figure