Introducing The Small World: Developing The Mems/Nanotechnology Curriculum

Xingguo Xiong, Linfeng Zhang, Junling Hu, Lawrence V. Hmurcik2020 · DOI

Abstract

MEMS (Microelectromechanical Systems) and nanotechnology are believed to be the exciting drive to trigger the next wave of technology revolution. MEMS refer to systems in micro scale (1 micron to 1 millimeter) that integrate mechanical components, sensors, actuators, and electronics on a common silicon substrate through micromachining technology. Due to its low cost, small size, light weight and high resolution, MEMS has been widely used in automobiles, medical health care, aerospace, consumer products and RF communications. Nanotechnology refers to a field of applied science and technology about materials and devices in the atomic and molecular scale, normally 1 to 100 nanometers. It can offer better built, longer lasting, cleaner, safer and smarter products for home, communications, medicine, transportation, agriculture and many other fields. MEMS and nanotechnology can be combined to create a new exciting field of NEMS (Nanoelectromechanical system). In order to introduce engineering students into this amazing micro and nanotechnology field, we developed three corresponding graduate-level courses: Introduction to MEMS (EE446), Introduction to Nanotechnology (EE451), and Microelectronic Fabrication (EE448). This curriculum offers students comprehensive knowledge and experience in MEMS and nanotechnology.

Addressing the Interdisciplinary Gap

As the "feature size" of technology continues to shrink—from the microns of Microelectromechanical Systems (MEMS) to the nanometers of nanotechnology—traditional engineering education faces a bottleneck. These fields are inherently interdisciplinary, requiring knowledge of electrical, mechanical, and materials engineering, yet many curricula remain siloed.

The challenge lies in effectively introducing these "invisible" technologies to students. The goal of the University of Bridgeport’s program was to move beyond abstract theory and provide students with the design, simulation, and fabrication knowledge necessary to enter a global market expected to exceed $60 billion. To ground these concepts, the curriculum uses natural benchmarks to help students conceptualize the scale of the "Small World," comparing microscopic manmade devices to familiar biological entities like hair and red blood cells.

Natural benchmarks for scale, from insects and hair to red blood cells and DNA.

Curriculum Design and Methodology

The core of the program consists of a three-course sequence within the School of Engineering:

  1. CpE/EE 446 (Introduction to MEMS): Focuses on design, simulation, and case studies of micro-scale systems.
  2. EE 451 (Introduction to Nanotechnology): Covers nanoscience, molecular electronics, and the emerging field of NEMS.
  3. EE 448 (Microelectronic Fabrication): Provides a deep dive into physical processes like photolithography, etching, and thin-film deposition.

A key pedagogical innovation is the use of multimedia-first instruction. To overcome the difficulty of visualizing micro/nano-scale operations, faculty integrated industry-standard videos and short clips to demonstrate fabrication and device movement. Furthermore, the courses are accessible to students across Electrical, Computer, Mechanical, and Technology Management departments, fostering a cross-disciplinary environment.

The spectrum of manmade technology, illustrating the transition from the Microworld to the Nanoworld.

Key Insights: Simulation and Failure Analysis

Recognizing that constant cleanroom access is often impractical, the curriculum leverages high-fidelity simulation as a viable alternative. Students use ANSYS FEM (Finite Element Method) tools to model real-world devices, such as comb accelerometers, based on industry benchmarks like the Analog Devices ADXL150/250.

One of the most successful lab projects involves simulating faults. By modeling why a MEMS device fails—such as "point-stiction," where micro-parts adhere to a substrate—students gain a deeper understanding of reliability and yield analysis than they would by only modeling "perfect" devices. This approach effectively teaches the nuances of device behavior in a controlled, digital environment.

Program Results and Institutional Impact

The curriculum has seen overwhelming success since its inception:

  • High Demand: Each 30-seat course section filled almost immediately, frequently resulting in long waitlists and the creation of additional sessions.
  • Qualitative Success: Student evaluations have been exceptionally high, with participants describing the courses as transformative for their engineering perspective.
  • Research Pipeline: The program serves as a feeder for higher-level research; many students have transitioned into Master’s theses focusing on micro-mirror optimization and nanodevice fabrication.
  • State-wide Influence: The program has become a cornerstone for the Connecticut Nanotechnology Curriculum Committee, helping set standards for nano-education across the state.

Limitations and Future Work

While currently focused at the graduate level, the authors are planning to expand the impact of the "Small World" curriculum:

  • Undergraduate Integration: Introducing "Special Topics" or Senior Design modules for junior and senior undergraduates.
  • K-12 Outreach: Developing presentations for elementary and high schools to trigger early interest in STEM.
  • Formal Tracks: Establishing a formalized "MEMS/Nanotechnology Track" with specific research requirements.
  • Industry Feedback: Collecting long-term performance data from graduates entering professional micro/nano-fabrication environments to further refine the syllabus.

Summary updated

Abstract

MEMS (Microelectromechanical Systems) and nanotechnology are believed to be the exciting drive to trigger the next wave of technology revolution.MEMS refer to systems in micro scale (1 micron to 1 millimeter) that integrates mechanical components, sensors, actuators, and electronics on a common silicon substrate through micromachining technology.Due to its low cost, small size, light weight and high resolution, MEMS has been widely used in automobiles, medical health care, aerospace, consumer products and RF communications.Nanotechnology refers to a field of applied science and technology about materials and devices in the atomic and molecular scale, normally 1 to 100 nanometers.It can offer better built, longer lasting, cleanser, safer and smarter products for home, communications, medicine, transportation, agriculture and many other fields.MEMS and nanotechnology can be combined to create a new exciting field of NEMS (Nanoelectromechanical system).In order to introduce engineering students into this amazing micro and nanotechnology field, we developed three corresponding graduate-level courses: Introduction to MEMS (EE446) and Introduction to Nanotechnology (EE451), and Microelectronic Fabrication (EE448).In addition, we have other related courses to support this program, such as EE 447: Semiconductor, EE 404: CMOS VLSI, EE 410: Bio-sensors, etc.This paper will discuss the course structure, syllabuses, course modules, student feedbacks, as well as future plans for this program.This curriculum offer students comprehensive knowledge and experience in MEMS and nanotechnology.Students use various CAD tools such as ANSYS FEM to design and simulate various MEMS/NEMS devices in the course projects.Multimedia technology is also used during the classroom teaching.We played vivid photos/videos to show the operation of MEMS/NEMS devices and state-of-the-art micro/nano fabrication processes in industry.Students demonstrated tremendous interest in this micro/nanotechnology program.The enrollment to these courses has been overwhelming and we have to create extra sessions to accommodate students with strong interest in this program.Our graduated students are well prepared for the industry in micro/nanotechnology fields.This program can also be helpful for the effort of the Connecticut Nanotechnology Curriculum Committee.
BibTeX
@misc{xiong2020introducing,
  author = {Xingguo Xiong and Linfeng Zhang and Junling Hu and Lawrence V. Hmurcik},
  title = {{Introducing The Small World: Developing The Mems/Nanotechnology Curriculum}},
  year = {2020},
  doi = {10.18260/1-2--4555},
}
Figure