Interfacing Spins in an InGaAs Quantum Dot to a Semiconductor Waveguide Circuit Using Emitted Photons

I. J. Luxmoore, Nicholas Andrew Wasley, A. J. Ramsay, A. C. T. Thijssen, Ruth Oulton, Maxime Hugues, Sachin Kasture, Venu Gopal Achanta, A. M. Fox, M. S. SkolnickPhysical 2013 · DOI

TL;DR

Researchers have developed a novel way to connect quantum dot spins to photonic circuits using two orthogonal waveguides. This breakthrough allows for the transfer and readout of spin information, paving the way for scalable quantum networks.

What Problem Does This Paper Address?

Quantum computers promise revolutionary capabilities, but building them requires efficiently controlling and connecting quantum bits (qubits). Quantum dots (QDs) are promising candidates for solid-state qubits due to their long coherence times and ability to be integrated into photonic circuits. However, a major hurdle is interfacing the QD's spin state with flying photonic qubits. The way spin is manipulated (using circularly polarized light) and the nature of standard waveguides (which only support linear polarization) create a fundamental mismatch. This prevents the efficient transfer of spin information across a chip using a single waveguide.

Methods

The core innovation is a "crossed photonic nanowire waveguide device." Here's how it works:

  • Spin-to-Path Encoding: A quantum dot at the intersection of two orthogonal waveguides emits photons. The polarization of these emitted photons is then converted into a "path-encoded" state. This means the photon's polarization information is translated into which waveguide it travels down.
  • Interference for Readout: For one device (device-A), the photons from the two waveguides are recombined. By observing interference patterns, researchers can deduce the original polarization state of the photon, and thus the spin state of the QD.
  • Direct Mapping (Device-B): In a second device (device-B), a surprising phenomenon was observed where circularly polarized photons were directly mapped to specific, antiparallel waveguides. This behavior, unexpected for a non-chiral structure, was attributed to the precise positioning of the QD within the waveguide intersection.
  • FDTD Simulations: Finite Difference Time Domain (FDTD) simulations were used to model the electromagnetic fields and understand how the QD's position affects the spin-to-path conversion.

Datasets

Not discussed in the paper.

Key Insights and Ideas

  • Bridging the Polarization Gap: The two-waveguide system elegantly solves the linear vs. circular polarization mismatch, enabling spin information to be carried by photons in a waveguide.
  • Path Encoding as a Solution: Translating spin information into the path a photon takes is a powerful strategy for on-chip quantum information transfer.
  • QD Position is Crucial: The precise location of the quantum dot within the waveguide intersection dramatically influences how spin information is encoded. This sensitivity, while initially surprising, offers a tunable parameter for device design.
  • Unexpected Chirality-like Behavior: Device-B's direct mapping of circular polarization to antiparallel waveguides, despite the non-chiral nature of the structure, highlights the complex interplay between QD position and photonic modes.

Key Results

  • Demonstrated Spin-to-Path Transfer: The researchers successfully demonstrated that the spin state of a QD can be coherently mapped to a path-encoded photon.
  • Spin Readout via Interference: For device-A, interference measurements confirmed the successful transfer and allowed for the readout of the QD spin state.
  • Direct Spin Readout in Device-B: Device-B showed a direct mapping of circular polarizations to specific waveguides, enabling in-plane spin readout without interferometry.
  • FDTD Simulations Validate Observations: Simulations accurately reproduced the experimental results, confirming the influence of QD position on spin-to-path conversion.

Limitations and Future Work

  • QD Position Sensitivity: While the QD position is key, it also means precise fabrication and control are necessary for optimal performance. The paper suggests that with characterization, the device can be corrected for QD position.
  • Scalability: The work provides a "blue-print" for scalable networks, but further steps are needed.
  • Future Directions: The authors propose enhancing light-matter interactions with nanocavities and integrating on-chip single-photon detectors. The ultimate goal is to demonstrate remote entanglement of on-chip spins.

Summary updated

Abstract

An in-plane spin-photon interface is essential for the integration of quantum dot spins with optical circuits. The optical dipole of a quantum dot lies in the plane and the spin is optically accessed via circularly polarized selection rules. Hence, a single waveguide, which can transport only one in-plane linear polarization component, cannot communicate the spin state between two points on a chip. To overcome this issue, we introduce a spin-photon interface based on two orthogonal waveguides, where the polarization emitted by a quantum dot is mapped to a path-encoded photon. We demonstrate operation by deducing the spin using the interference of in-plane photons. A second device directly maps right and left circular polarizations to antiparallel waveguides, surprising for a nonchiral structure but consistent with an off-center dot.
BibTeX
@inproceedings{luxmoore2013interfacing,
  author = {I. J. Luxmoore and Nicholas Andrew Wasley and A. J. Ramsay and A. C. T. Thijssen and Ruth Oulton and Maxime Hugues and Sachin Kasture and Venu Gopal Achanta and A. M. Fox and M. S. Skolnick},
  title = {{Interfacing Spins in an InGaAs Quantum Dot to a Semiconductor Waveguide Circuit Using Emitted Photons}},
  booktitle = {Physical},
  year = {2013},
  doi = {10.1103/physrevlett.110.037402},
}
Figure