Intelligent Vehicle Path Tracking Control Method Based on Curvature Optimisation

Qing Ye, Chaojun Gao, Yao Zhang, Zeyu Sun, Ruochen Wang, Chen Long2023 · DOI

TL;DR

This paper introduces a novel intelligent vehicle path tracking control method that optimizes curvature to simultaneously improve tracking accuracy and vehicle body stability. By integrating a fuzzy sliding mode controller with a genetic algorithm-based curvature optimization, the system effectively addresses the inherent trade-off between these two critical performance metrics, especially under challenging driving conditions.

What Problem Does This Paper Address?

Intelligent vehicles (IVs) rely on precise motion control for safe and comfortable operation. A key aspect of this is path tracking, where the vehicle follows a predefined trajectory. However, a fundamental challenge in IV path tracking is the conflict between achieving high tracking accuracy and maintaining vehicle body stability. Improving one often degrades the other, particularly at high speeds or on roads with sharp curves. Existing methods often prioritize accuracy, neglecting stability, or employ complex algorithms that are difficult to implement in real-world scenarios. This paper aims to resolve this conflict by developing a control strategy that explicitly considers and optimizes for both accuracy and stability.

Methods

The proposed approach combines a fuzzy sliding mode controller (FSMC) with a curvature optimization system.

  • Path Tracking Control System: This core system utilizes a three-degrees-of-freedom vehicle dynamics model (including roll dynamics), a preview error model to capture driver-like behavior, and an FSMC for generating steering commands. The FSMC itself comprises an equivalent controller, a switching controller, and a fuzzy controller to manage system states and adapt to uncertainties.
  • Curvature Optimization System: This novel component analyzes vehicle body stability under various conditions (yaw rate, lateral acceleration, roll angle) to determine stability boundary conditions. A genetic algorithm (GA) is then employed to find an optimized path curvature that is closest to the original desired path while staying within these stability constraints. The GA involves encoding, population initialization, fitness function definition (balancing tracking error and stability), selection, crossover, and mutation operators. The optimized curvature is then fed back into the path tracking controller.

Datasets

Not discussed in the paper. The study relies on simulations and Hardware-in-the-Loop (HIL) testing with defined vehicle parameters and simulated driving scenarios.

Key Insights and Ideas

  • Curvature as a Control Lever: The paper highlights that optimizing the desired path curvature itself, rather than solely adjusting the control algorithm, can be a powerful way to balance tracking accuracy and stability.
  • Genetic Algorithm for Optimization: Using a GA for curvature optimization is effective because it can explore a wide range of possibilities and find a solution that satisfies multiple, potentially conflicting, objectives (accuracy and stability).
  • Stability Constraints are Crucial: Explicitly defining and enforcing stability boundary conditions (based on yaw rate, lateral acceleration, and roll angle) is essential for preventing vehicle instability, especially under extreme maneuvers.
  • Trade-off Management: The research demonstrates that while optimizing for stability might slightly reduce peak tracking accuracy in some extreme cases (e.g., high speed, sharp turns), it ensures overall safer and more controlled vehicle behavior.

Key Results

The proposed method demonstrated significant improvements in both tracking accuracy and vehicle stability across various simulated scenarios:

  • Low Speed/Low Curvature (vx = 10 m/s, ρ = 0.15 m⁻¹): Lateral deviation reduced by 84.10%, with a modest 2.00% increase in stability parameters.
  • Low Speed/Higher Curvature (vx = 10 m/s, ρ = 0.2 m⁻¹): Lateral deviation reduced by 66.80%, with a 4% improvement in stability.
  • High Speed/Low Curvature (vx = 15 m/s, ρ = 0.15 m⁻¹): Stability improved by 20–30%, with some loss in tracking accuracy (lateral deviation of 0.7821 m, still within acceptable limits) as stability constraints were triggered.
  • HIL Tests: Verification through Hardware-in-the-Loop testing confirmed the simulation results, showing that the optimized controller effectively improves tracking accuracy and ensures body stability under real-world-like conditions.

Limitations and Future Work

  • Model Simplification: The vehicle dynamics model used is a three-degrees-of-freedom model that ignores longitudinal motion, suspension dynamics, and unsprung mass. This simplification might affect performance in highly dynamic scenarios.
  • Real-world Complexity: While HIL tests provide a good validation, the paper acknowledges that accurately simulating real-world complexities like controller time delays and external interferences remains a challenge.
  • Future Work: The authors suggest that further research could explore more complex vehicle models and investigate the impact of various external factors on the control system's performance. The current study focuses on constant speed, and extending it to variable speed scenarios would be a valuable next step.

Summary updated

BibTeX
@misc{ye2023intelligent,
  author = {Qing Ye and Chaojun Gao and Yao Zhang and Zeyu Sun and Ruochen Wang and Chen Long},
  title = {{Intelligent Vehicle Path Tracking Control Method Based on Curvature Optimisation}},
  year = {2023},
  doi = {10.3390/s23104719},
}

Loading related content...

Figure