Intelligent Reflective Surface Assisted Integrated Sensing and Wireless Power Transfer

Zheng Li, Zhengyu Zhu, Zheng Chu, Yingying Guan, De Mi, Fan Liu, Lie‐Liang YangarXiv 2023 · DOI · arXiv

TL;DR

This paper proposes using Intelligent Reflecting Surfaces (IRS) to simultaneously sense targets and wirelessly power IoT devices in smart transportation environments. By jointly optimizing transmitter beamforming and IRS phase shifts, the authors demonstrate how to overcome signal blockages and path loss, creating a more efficient and self-sustaining "Beyond 5G" network.

What Problem Does This Paper Address?

As we move toward "Beyond 5G" (B5G) and 6G, wireless networks are expected to do more than just transmit data. Two emerging priorities are Integrated Sensing (using radio waves like radar to detect objects) and Wireless Power Transfer (WPT) (charging IoT devices without cables).

However, combining these into an Integrated Sensing and Wireless Power Transfer (ISWPT) system faces two major hurdles:

  1. Path Loss and Blockage: High-frequency signals weaken quickly over distance, and urban obstacles (like buildings or vehicles) can easily block the Line-of-Sight (LoS) needed for both sensing and charging.
  2. The Performance Trade-off: There is a fundamental "tug-of-war" between sensing and energy harvesting. Optimizing for one often degrades the other.

The authors tackle these challenges by introducing an Intelligent Reflecting Surface (IRS)—essentially a "smart mirror" that can steer wireless signals around obstacles and focus them precisely where they are needed.

Methods

The researchers modeled a system where a multi-antenna transmitter sends signals to $M$ targets and $K$ energy-harvesting devices (EHDs). To manage the complexity of controlling both the transmitter's beam and the IRS's reflections, they proposed two main approaches:

  • Joint Optimization Framework: They formulated a mathematical problem to maximize a weighted sum of harvested energy and sensing beampattern gain. A trade-off factor ($\rho$) allows operators to prioritize either sensing or power.
  • SDP Algorithm: Using Alternating Optimization (AO), they split the problem into two sub-problems (beamforming and phase shifts). They applied Semi-Definite Programming (SDP) to relax complex constraints, making the problem solvable with standard optimization tools.
  • Low-Complexity (LC) Algorithm: Recognizing that SDP can be computationally expensive for large surfaces, they developed a faster alternative. This uses Successive Convex Approximation (SCA) for the transmitter and the Majorization-Minimization (MM) algorithm for the IRS phase shifts.

Datasets

This study relies on numerical simulations rather than a physical dataset. The authors used standard wireless channel models, specifically:

  • Rician Fading Channels: To model the combination of direct and reflected signal paths.
  • Path-Loss Models: Following the $Pl = \varsigma d^{-\chi}$ formula to simulate signal decay over distance.
  • Parameters: The simulation used a transmitter with 12 antennas, an IRS with up to 70 elements, and targets located at specific angles (-45°, 0°, and 45°).

Key Insights and Ideas

  • The IRS as a Virtual LoS: The most significant insight is that an IRS can create a "virtual" line-of-sight. Even if a target or an IoT device is hidden behind a wall, the IRS can bounce the signal to reach them, effectively "seeing" around corners.
  • Fast Convergence: Surprisingly, both the high-complexity SDP and the low-complexity LC algorithms converge to a stable solution in just 2 to 3 iterations. This suggests the system could potentially adapt to changing environments in near real-time.
  • The Power of Optimization: The authors show that simply having an IRS isn't enough; you must optimize the phase shifts. Their optimized scheme significantly outperformed a "Random Phase Scheme" (RPS), proving that "smart" reflection is the key to efficiency.

Key Results

  • Energy Gains: The sum of harvested energy increased significantly as the number of IRS reflecting elements ($L$) increased. For example, moving from 20 to 70 elements dramatically boosted the power available to IoT devices.
  • Sensing Precision: The system successfully generated sharp "beampattern peaks" at the exact angles of the targets. However, as the priority shifted toward energy harvesting (higher $\rho$), these sensing peaks became slightly less focused.
  • IRS Superiority: In scenarios where the direct link was weak, the IRS-assisted system provided a massive performance boost compared to systems without an IRS, validating its role in overcoming environmental blockages.

Limitations and Future Work

  • Perfect CSI Assumption: The paper assumes "Perfect Channel State Information" (CSI), meaning the system knows exactly how the signal will behave in the environment. In reality, acquiring CSI for an IRS is notoriously difficult and overhead-heavy.
  • Static Targets: The current model assumes targets and EHDs are relatively stationary. Future work could explore how the system handles high-mobility scenarios, such as fast-moving vehicles in a smart city.
  • Hardware Impairments: The study uses an ideal model for IRS reflections. Real-world hardware often has phase errors or limited resolution (discrete phase shifts), which could impact performance.

Reference: Li, Z., Zhu, Z., Chu, Z., Guan, Y., Mi, D., Liu, F., & Yang, L.-L. (2023). Intelligent Reflective Surface Assisted Integrated Sensing and Wireless Power Transfer. arXiv:2309.06909v3.

Summary updated

Abstract

Wireless sensing and wireless energy are enablers to pave the way for smart transportation and a greener future. In this paper, an intelligent reflecting surface (IRS) assisted integrated sensing and wireless power transfer (ISWPT) system is investigated, where the transmitter in transportation infrastructure networks sends signals to sense multiple targets and simultaneously to multiple energy harvesting devices (EHDs) to power them. In light of the performance tradeoff between energy harvesting and sensing, we propose to jointly optimize the system performance via optimizing the beamforming and IRS phase shift. However, the coupling of optimization variables makes the formulated problem non-convex. Thus, an alternative optimization approach is introduced and based on which two algorithms are proposed to solve the problem. Specifically, the first one involves a semi-definite program technique, while the second one features a low-complexity optimization algorithm based on successive convex approximation and majorization minimization. Our simulation results validate the proposed algorithms and demonstrate the advantages of using IRS to assist wireless power transfer in ISWPT systems.
BibTeX
@misc{li2023intelligent,
  author = {Zheng Li and Zhengyu Zhu and Zheng Chu and Yingying Guan and De Mi and Fan Liu and Lie‐Liang Yang},
  title = {{Intelligent Reflective Surface Assisted Integrated Sensing and Wireless Power Transfer}},
  year = {2023},
  eprint = {2309.06909},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2309.06909},
}
Figure