Abstract
An indoor robot navigation system is investigated, where an intelligent reflecting surface (IRS) is employed to enhance the connectivity between the access point (AP) and a mobile robotic user. The considered system is optimized for minimization of the travelling time/distance of the mobile robotic user from a given starting point to a predefined final location, while satisfying constraints on the communication quality. To tackle this problem, a radio map based approach is proposed to exploit location-dependent channel propagation knowledge. Specifically, a channel power gain map is constructed, which characterizes the spatial distribution of the maximum expected effective channel power gain of the mobile robotic user for the optimal IRS phase shifts. Based on the obtained channel power gain map, the communication-aware robot path planing problem is solved as a shortest path problem by exploiting graph theory. Numerical results show that: 1) Deploying an IRS can significantly extend the coverage of the AP and reduce the travelling distance of the mobile robotic user; 2) 2- or 3-bit IRS phase shifters can achieve nearly the same performance as continuous IRS phase shifters.
Introduction
As 5G and Beyond 5G (B5G) networks evolve, robots are increasingly designed as connected entities that offload heavy computational tasks to edge servers via Access Points (APs). However, indoor environments present significant challenges due to signal-blocking obstacles like walls and machinery. If a robot enters a "dead zone," it loses connectivity and functionality. Traditional path planning focuses on physical collision avoidance, but "communication-aware" path planning must also navigate around these invisible signal obstacles. The complexity arises because signal quality depends on both the robot's location and the configuration of the network infrastructure, such as Intelligent Reflecting Surfaces (IRS).
Methodology
The proposed framework utilizes a radio-map-based approach to decouple the robot's movement from real-time IRS phase-shift optimization. The process involves three main steps:
- Channel Power Gain Map Construction: The 2D space is discretized into a grid. For each cell, the maximum expected effective channel power gain is calculated, assuming optimal IRS phase shifts for that specific location.
- Feasibility Mapping: A "feasible map" is generated by identifying cells that meet a minimum signal strength threshold ($\gamma$). Cells failing this threshold or containing physical obstacles are marked as non-traversable.
- Graph-Based Path Planning: The feasible map is treated as an undirected weighted graph where cells are vertices and edges represent physical distances. Dijkstra’s algorithm is then applied to find the shortest path from the start to the destination within the connected zones.
The IRS acts as a "virtual AP," bending signals around obstacles to provide coverage in Non-Line-of-Sight (NLoS) areas. This "path straightening" effect allows robots to take more direct routes that would otherwise be disconnected.
Results and Discussion
The system was evaluated in a simulated 20m x 20m Indoor Factory (InF) environment following 3GPP standards. Key findings include:
- Coverage Extension: The IRS provided a 2.6 dB performance gain in the minimum achievable signal threshold compared to the system without an IRS.
- Distance Reduction: Robots assisted by an IRS traveled up to 18.87% less distance compared to those without IRS assistance, as they could bypass long detours required to maintain connectivity.
- Hardware Efficiency: 2-bit or 3-bit phase shifters performed nearly as well as continuous phase shifters, indicating that high-performance navigation is achievable with cost-effective hardware.
Conclusion
This study demonstrates that IRS can effectively eliminate wireless dead zones for indoor robots. By using radio maps, the complex coupling between location and signal optimization is resolved, enabling efficient path planning. Future work will address dynamic environments with moving obstacles, multi-robot coordination, and the impact of imperfect Channel State Information (CSI).
Summary updated