Integration of Geological Model and Numerical Simulation Technique to Characterize the Remaining Oil of Fractured Biogenic Limestone Reservoirs

Xintong Yu, Zhihong Kang, Yunpeng Li, Xuechun Lin, Lei Xie, Jiaqi LiArabian 2024 · DOI

Abstract

Fine geological modeling is the cornerstone of accurate reservoir numerical simulations, particularly in complex environments like fractured biogenic limestone. These reservoirs possess abundant storage spaces and intricate flow paths, yet their inherent heterogeneity poses significant challenges for characterizing pore volume and remaining oil. This study presents an integrated workflow utilizing a dual-porosity and dual-permeability (DPDP) model, guided by a discrete fracture network (DFN) and calibrated via the optimized discrete adjoint (ODA) algorithm. By fusing core, logging, and seismic data, the research identifies six distinct remaining oil distribution patterns, providing a strategic framework for late-stage oilfield development.

Introduction

In the mature stages of oilfield development, identifying bypassed or "remaining" oil is critical for maintaining production levels. Fractured biogenic limestone reservoirs—formed from the skeletal remains of marine organisms—represent some of the most complex geological targets. These reservoirs are characterized by a dual-medium system: a rock matrix with low permeability but high storage capacity, and a network of natural fractures and dissolved cavities that provide high-conductivity flow paths.

Traditional single-porosity models often fail to capture the dynamic interaction between these two media, leading to inaccurate predictions of water breakthrough and oil recovery. This investigation addresses these challenges by integrating high-resolution geological modeling with advanced numerical simulation techniques to map the remaining oil in the South Dagang Fracture Tectonic Zone.

Methodology: A Multi-Scale Integrated Approach

1. Tectonic Refinement and DFN Modeling

The foundation of the study is a refined tectonic model. The researchers combined core analysis, Formation MicroScanner (FMI) logging, and seismic "ant-body" attributes to interpret low-level sequence faults. This data fusion allowed for the construction of a Discrete Fracture Network (DFN) model. Unlike continuum models, the DFN treats fractures as individual geometric entities with specific orientations, lengths, and apertures, providing a more realistic representation of the reservoir's plumbing system.

2. Dual-Porosity Dual-Permeability (DPDP) Simulation

To simulate fluid flow, a DPDP model was established. This approach treats the matrix and the fractures as two overlapping continua. The model tracks pressure and saturation in both systems independently, linked by a "sigma factor" (shape factor) that governs the fluid exchange between the matrix and the fractures. This is essential for modeling waterflooding, where injected water often travels rapidly through fractures, leaving significant amounts of oil trapped in the matrix blocks.

3. Parameter Calibration via ODA Algorithm

To ensure the model's reliability, the researchers employed the Optimized Discrete Adjoint (ODA) algorithm. This mathematical framework allows for the efficient calibration of model parameters by minimizing the difference between simulated results and observed production data. The model was validated against the historical performance of 124 wells, achieving a history match rate of over 95%.

Key Insights: The Thickness-Fracture Correlation

A significant finding of the study is the strong linear correlation between the thickness of the biogenic limestone and the density of tectonic fractures. Areas with thicker limestone accumulations were found to have higher fracture-matrix conductivity multipliers. Paleomagnetic studies further revealed that the majority of these fractures (over 80%) are high-angle (dips >60°) and oriented primarily in the NEE-SWW direction. This directional bias creates preferential flow paths that must be accounted for in well placement strategies.

Characterizing Remaining Oil Distribution Patterns

By analyzing the simulation results, the researchers categorized the remaining oil into six distinct "modes":

  1. Tectonically Controlled: Oil trapped in local structural highs or undulations.
  2. Localized Low-Permeability: Bypassed oil in tight zones where the injection pressure is insufficient to displace the hydrocarbons.
  3. Fracture-Controlled: Oil remaining in areas where the fracture network is underdeveloped, limiting connectivity.
  4. Fault-Controlled: Hydrocarbons trapped against sealing faults that act as barriers to flow.
  5. Imperfect Well Network: Areas with insufficient well spacing where the current drainage radius does not reach.
  6. Reservoir Non-Homogeneity: Oil bypassed due to general lithological variations and facies changes.

Conclusion and Practical Application

The integration of DFN geological modeling and DPDP numerical simulation offers a robust methodology for managing mature fractured reservoirs. The calculated geological reserves showed a minimal 0.21% error compared to traditional volumetric methods, confirming the model's accuracy.

Practically, this workflow guided the deployment of nine new wells in the South Dagang zone. Predictive analysis indicates that these strategic placements could increase daily oil production by approximately 80 tons. This study underscores the necessity of mastering advanced simulation technologies and integrating multi-source data to unlock the remaining potential of complex limestone reservoirs.

Summary updated

Abstract

Abstract Fine geological modeling leads to accurate reservoirs numerical simulations. Fractured biogenic limestone has abundant storage spaces and flow paths to accumulate oil and gas. The complexity and diversity of fractured biogenic limestone also lead to challenges in accurately characterizing its pore volume and remaining oil. This investigation aimed to enhance the understanding of fractured biotite reservoir properties via geological modeling. Numerical simulations were used to characterize the remaining oil during the late stage of field development. Considering the differences in porosity and permeability between fractures and matrix, a facies-controlled stochastic modeling technique was used to establish a dual-porosity and dual-permeability (DPDP) model for numerical simulation. Core information, logging data, and multiple seismic attributes were combined to guide low-level sequence fault interpretation for tectonic refinement. Based on classified seismic inversion, sedimentary phases were reconstructed. A discrete fracture network (DFN) model was obtained based on fracture occurrences and density models. The optimized discrete adjoint (ODA) algorithm was utilized to calibrate model parameters. The findings revealed that dense tectonic fractures develop in thick biogenic limestone areas. Combined with advanced reservoir simulation technology, these findings suggest that areas of thicker biogenic limestone were consistent with areas of higher fracture matrix conductivity multipliers. The remaining oil distribution patterns were investigated, and to deploy new wells was guided. Therefore, it is essential to better understand the tectonic characteristics of fractured biogenic limestone reservoirs and their remaining oil distribution patterns by integrating multiple sources of information and mastering advanced reservoir simulation technology for oilfield development.
BibTeX
@inproceedings{yu2024integration,
  author = {Xintong Yu and Zhihong Kang and Yunpeng Li and Xuechun Lin and Lei Xie and Jiaqi Li},
  title = {{Integration of Geological Model and Numerical Simulation Technique to Characterize the Remaining Oil of Fractured Biogenic Limestone Reservoirs}},
  booktitle = {Arabian},
  year = {2024},
  doi = {10.1007/s13369-024-09675-2},
}
Figure