TL;DR
This paper demonstrates the first successful integration of a high-speed radio-over-fiber (RoF) communication system with a distributed fiber optic sensor (BOTDR) using a single optical fiber. This integration significantly reduces infrastructure costs by allowing both data transmission and structural health monitoring to share the same fiber, achieving acceptable communication performance and precise temperature sensing.
What Problem Does This Paper Address?
The increasing demand for high data rates in mobile communication (5G and beyond) necessitates robust and efficient network infrastructure. Simultaneously, structural health monitoring of critical infrastructure relies on distributed fiber optic sensors to detect issues like strain or temperature changes over long distances. However, deploying separate fiber optic cables for communication and sensing is costly and complex. This paper addresses the challenge of integrating these two distinct functionalities onto a single optical fiber link, aiming to reduce infrastructure costs while maintaining the performance of both systems.
Methods
The core of this work is the simultaneous transmission of a radio-over-fiber (RoF) communication signal and a Brillouin Optical Time-Domain Reflectometry (BOTDR) sensing signal over a single 25 km single-mode silica fiber.
- Communication System: The RoF system utilizes three advanced modulation formats: Quadrature Phase-Shift Keying (QPSK), 16-Quadrature Amplitude Modulation (16-QAM), and 64-QAM, all modulated onto an Orthogonal Frequency Division Multiplexing (OFDM) signal. These signals are transmitted at a carrier frequency of 2.6 GHz with a 10 MHz bandwidth. The performance is evaluated using the Error Vector Magnitude (EVM), a standard metric for digital modulation quality.
- Sensing System: The BOTDR system employs a distributed-feedback (DFB) laser at a slightly different wavelength (1546.12 nm) to avoid interference. It uses a 50 ns pulse width, providing a spatial resolution of 5 meters. The system is designed for strain and temperature monitoring.
- Integration Technique: A multiplexer combines the communication and sensing signals before they are sent through the shared fiber. At the receiver, a band-pass filter (BPF) is crucial for separating the communication signal from the sensing signal, preventing interference and ensuring data integrity. The authors investigate the impact of this filter on communication performance.
Datasets
Not discussed in the paper. The experiments were conducted using laboratory equipment and a 25 km spool of single-mode silica fiber.
Key Insights and Ideas
- Cost-Effective Infrastructure: The most significant insight is the feasibility of sharing a single optical fiber for both high-speed data communication and distributed sensing, dramatically reducing deployment costs and complexity.
- Interference Management is Crucial: The performance of the communication system (measured by EVM) is significantly degraded by the presence of the sensing signal without proper filtering. The use of a band-pass filter at the receiver is essential for isolating the communication signal and achieving acceptable EVM values.
- BOTDR's Robustness: The BOTDR sensing system demonstrates remarkable resilience to the presence of the active communication signal. The temperature measurement accuracy remains high, indicating that the communication traffic does not significantly compromise the sensing capabilities.
- Modulation Format Impact: While the paper focuses on QPSK for detailed analysis, the results for 16-QAM and 64-QAM suggest that higher-order modulation formats can also be integrated, though they might be more sensitive to residual interference.
Key Results
- Communication Performance: With the band-pass filter, the QPSK modulated signal achieved an EVM of 3.5% at 10 dBm data power and 18 dBm sensing power, which is within 3GPP requirements. Without the filter, the EVM increased to 14.5% under the same conditions, highlighting the filter's importance.
- Sensing Performance: The BOTDR system achieved a low temperature measurement error of ±0.49 °C at the end of the 25 km fiber, even with the communication signal present. The spatial resolution of 5 meters was confirmed.
- Temperature Sensitivity: The Brillouin gain spectrum (BGS) showed a temperature sensitivity of 1.07 ± 0.013 MHz/°C.
Limitations and Future Work
- Wavelength Spacing: The current implementation uses a relatively large wavelength spacing between the communication and sensing signals. The authors suggest that further investigation into narrower wavelength spacing is needed to fully understand and optimize the cross-impact.
- Modulation Format Sensitivity: While higher-order modulation formats (16-QAM, 64-QAM) were tested, their performance was not analyzed as extensively as QPSK, especially concerning the impact of sensing power and filtering.
- Future Work: The authors propose exploring integration with Dense Wavelength Division Multiplexing (DWDM) and Coarse Wavelength Division Multiplexing (CWDM) to increase bandwidth and data rates. They also suggest integrating other advanced sensing techniques like Raman amplification and wavelength diversity for further performance enhancements.
Summary updated