TL;DR
This paper presents an integrated optoelectronic position sensor (iOE-PS) fabricated on a standard CMOS chip. This sensor can simultaneously measure the linear displacement and tilting angle of electrothermal MEMS scanning mirrors, a crucial capability that has been lacking in many existing systems, thereby enabling more complex and cost-effective MOEMS modules.
What Problem Does This Paper Address?
Scanning micromirrors are vital components in various applications like biomedical imaging, spectroscopy, and displays. However, many electrothermal MEMS scanning mirrors lack integrated position sensing capabilities. This absence significantly limits their application space, as precise control and feedback are often required. Existing methods for position sensing, such as capacitive or piezoresistive sensing, are not well-suited for electrothermal bimorph-based micromirrors due to their large displacements and material compositions. While other methods like inductive or optical sensing exist, they often suffer from challenges like miniaturization difficulties, large packaging sizes, or the need for complex assembly. This paper addresses the need for a compact, integrated, and accurate position sensing solution for electrothermal MEMS scanning mirrors.
Methods
The core innovation is the integrated optoelectronic position sensor (iOE-PS), fabricated on a standard 0.5 µm CMOS process. This single chip integrates:
- A laser diode (VCSEL): Acts as the light source.
- A Quadrant Photo-Detector (QPD): A monolithic receiver composed of four identical photodetectors.
- Driving circuits: For the VCSEL.
- Readout circuits: For the QPD.
- A band-gap reference: Provides stable voltage and current sources.
The iOE-PS chip is designed to be placed directly beneath the MEMS mirror. The principle of operation involves the VCSEL emitting light, which is reflected by the MEMS mirror. The reflected light spot's position on the QPD changes based on the mirror's vertical displacement and tilting angle. By analyzing the photocurrents generated by each of the four QPD segments, both displacement and tilt can be calculated. The paper details the optical design, including ray tracing and theoretical analysis to optimize parameters like PD spacing (W) and length (L), as well as the distance between the mirror and the iOE-PS chip (h). The QPD itself is based on a n+/N-Well/P-sub photodetector structure, optimized for responsivity and frequency response (up to 1 MHz).
Datasets
Not discussed in the paper. The paper focuses on the design, simulation, and experimental validation of the iOE-PS system.
Key Insights and Ideas
- Integration is Key: The primary breakthrough is the complete integration of the light source, detector, and associated electronics onto a single CMOS chip. This drastically reduces the complexity and cost of MEMS mirror modules.
- Dual Sensing Capability: The iOE-PS effectively measures both linear (piston) displacement and angular (tip-tilt) motion simultaneously, a significant advantage over single-axis sensors.
- CMOS Compatibility: Leveraging a standard CMOS process makes the iOE-PS fabrication cost-effective and scalable.
- Optical Design Optimization: The paper highlights the importance of carefully selecting parameters like PD spacing, PD area, and the distance between the mirror and the sensor to achieve optimal linear response and sensitivity for both displacement and tilt.
- Trade-offs in Sensing: The research demonstrates trade-offs between different optical parameters (e.g., divergence angle of the light source, PD dimensions) and their impact on the linearity and sensitivity of the position measurements.
Key Results
- The iOE-PS chip has a footprint of 5 mm × 5 mm.
- Each quadrant of the QPD has a photosensitive area of 500 µm × 500 µm.
- The system demonstrates a linear response for vertical displacement between 2.0 mm and 3.0 mm, with a sensitivity of 2.9 V/mm.
- The system exhibits a linear response for tilting angles from approximately -5° to +5°.
- The QPD has a measured frequency response of up to 1 MHz, which is sufficient for typical MEMS mirror testing frequencies (1 Hz to 10 kHz).
- The optical simulation and experimental results show good agreement, validating the design.
Limitations and Future Work
- Saturation Behavior: The paper notes that at larger displacements (beyond 3.0 mm), the QPD exhibits saturation behavior, leading to a non-linear response and reduced sensitivity. This is attributed to both light power attenuation per unit area and the device's inherent responsivity limits.
- Packaging: While the integration is on-chip, the paper mentions the iOE-PS chip is glued in a COB package and wire-bonded. Further development of compact packaging solutions is suggested to fully leverage the integrated nature of the system.
- Dynamic Range Determination: For real-world applications, users need to determine the specific monitoring scope beforehand to ensure operation within the linear ranges or to account for non-linear behavior.
- Future Work: The authors suggest that with further development of compact packaging, this iOE-PS method can enable large-scan-range electrothermal MEMS mirrors with integrated high-accuracy displacement and angle sensing, significantly expanding their application space through closed-loop feedback control.
Summary updated