InP-based Geiger-mode avalanche photodiode arrays for three-dimensional imaging at 1.06 μm

Mark A. Itzler, Mark Entwistle, Mark Owens, Xudong Jiang, Ketan M. Patel, Krystyna Slomkowski, Tim Koch, Sabbir Rangwala, Peter F. Zalud, Young Yu, John R. Tower, Joseph FerraroProceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE 2009 · DOI

TL;DR

This paper introduces a novel 32x32 focal plane array (FPA) of InP-based Geiger-mode avalanche photodiodes (GmAPDs) for 3D laser radar imaging at 1.06 µm. These arrays achieve high single-photon sensitivity and enable precise time-of-flight measurements, paving the way for more robust and detailed 3D imaging applications.

What Problem Does This Paper Address?

Traditional 2D imaging relies on inferring object shapes from intensity variations, which can be ambiguous and require complex processing. Three-dimensional (3D) imaging, by providing range information for each pixel, offers a more direct and unambiguous way to characterize objects and scenes. This is particularly useful for applications like imaging through camouflage or foliage, where traditional methods struggle. While 3D imaging has advanced, achieving high sensitivity, especially with single-photon detection, and integrating this into large-format arrays with high performance has remained a challenge. This paper addresses the need for highly sensitive, large-format 3D imagers by developing and characterizing InP-based Geiger-mode avalanche photodiode arrays.

Methods

The core of this work is the development of a 32x32 focal plane array (FPA) using InGaAsP/InP Geiger-mode avalanche photodiodes (GmAPDs). Key methodological aspects include:

  • Planar-Passivated Buried-Junction GmAPD Platform: The authors employ a novel planar-geometry GmAPD device structure with a buried p-n junction. This design, unlike previous mesa-based approaches, is claimed to offer better uniformity, operational stability, and long-term reliability.
  • Custom Readout Integrated Circuits (ROICs): To complement the photodiode arrays, custom CMOS ROICs were designed and fabricated. These ROICs perform per-pixel avalanche detection and time-of-flight (ToF) measurements, crucial for 3D imaging. They incorporate 13-bit counters for precise timing and support high frame rates.
  • Hybridization and Packaging: The photodiode arrays are hybridized to the ROICs using indium bump flip-chip bonding. The resulting chip stack is then integrated into a package with a thermoelectric cooler (TEC) to enable operation at low temperatures (down to 240 K), which is beneficial for reducing dark current.
  • Characterization Techniques: The paper details extensive characterization, including:
  • Wafer-level I-V characteristics: To assess the uniformity of breakdown voltage (Vb) across the array.
  • Dark Count Rate (DCR) and Photon Detection Efficiency (PDE) measurements: To evaluate the detector's sensitivity and noise performance as a function of excess bias and temperature.
  • Optical Crosstalk Analysis: Investigating how light emitted from one avalanche event can trigger a neighboring pixel, using both dark count data and single-pixel illumination.
  • FPA-level imaging: Demonstrating the system's capability by imaging a broadened optical beam.

Datasets

Not discussed in the paper. The paper focuses on the development and characterization of a novel hardware system.

Key Insights and Ideas

  • Planar GmAPDs for FPAs: The successful implementation of planar-geometry GmAPDs in a 32x32 array is a significant step, offering a potentially more scalable and uniform platform compared to previous mesa-based designs.
  • Narrow Breakdown Voltage Distribution: Achieving a breakdown voltage variation of less than 0.35 V across 1024 pixels is critical for FPA yield and uniform performance. This uniformity is a testament to the fabrication process.
  • High Single-Photon Sensitivity: The demonstrated 40% photon detection efficiency (PDE) at an excess bias of 3.3 V, coupled with low dark count rates (2 kHz average), highlights the system's capability for sensitive 3D imaging with minimal optical power.
  • Controlling Optical Crosstalk: The paper provides valuable insights into optical crosstalk, a key challenge for SPAD arrays. The authors show that while crosstalk exists, it can be mitigated through isolation trenches and that its behavior is anisotropic, particularly for nearest neighbors, due to the trench geometry. This anisotropy is an interesting finding that can be leveraged for further design optimization.
  • Anisotropic Crosstalk Origin: The observed anisotropy in crosstalk, with vertical neighbors experiencing higher crosstalk than horizontal ones, is directly linked to the V-groove geometry of the isolation trenches. This suggests that precise control over fabrication processes can influence and potentially minimize crosstalk.

Key Results

  • 32x32 GmAPD FPAs: Successful development and characterization of 32x32 InGaAsP/InP GmAPD focal plane arrays.
  • Breakdown Voltage Uniformity: A breakdown voltage distribution width of 0.35 V across 1024 pixels, with a standard deviation of 0.056 V, representing a variation of less than 0.1% relative to the mean (~85.1 V).
  • Performance at 248 K:
    • Average dark count rate (DCR) of 2 kHz.
  • Photon detection efficiency (PDE) of 40% at an excess bias of 3.3 V.
  • Dark count rate standard deviation of less than 1 kHz.
  • Optical Crosstalk: Worst-case crosstalk probability per pixel for nearest neighbors is less than 1.6%. Anisotropy observed, with vertical nearest neighbors showing ~1.6% crosstalk and horizontal ~0.8%.
  • Custom ROIC: Developed ROICs provide 13-bit timestamp data and support frame rates exceeding 200 kHz.

Limitations and Future Work

  • Crosstalk Anisotropy: While the anisotropy is characterized and linked to trench geometry, further work is needed to fully understand and potentially optimize the optical transmission through these features for better crosstalk mitigation.
  • Temperature Dependence: The paper notes that DCR increases significantly with temperature. While a TEC is included, operation at higher ambient temperatures might still pose challenges.
  • Microlens Arrays: The paper mentions the inclusion of GaP microlens arrays for enhanced collection efficiency in fully assembled modules but defers further description to a later publication. The performance impact of these microlenses is not detailed here.
  • Further Optimization: The authors suggest that further improvements in fabrication and design could lead to even higher PDE and lower DCR, as well as more refined crosstalk control. The development of modules with microlens arrays is also a clear next step.

Summary updated

Abstract

We report on the development of 32 x 32 focal plane arrays (FPAs) based on InGaAsP/InP Geiger-mode avalanche photodiodes (GmAPDs) designed for use in three-dimensional (3-D) laser radar imaging systems at 1064 nm. To our knowledge, this is the first realization of FPAs for 3-D imaging that employ a planar-passivated buried-junction InP-based GmAPD device platform. This development also included the design and fabrication of custom readout integrate circuits (ROICs) to perform avalanche detection and time-of-flight measurements on a per-pixel basis. We demonstrate photodiode arrays (PDAs) with a very narrow breakdown voltage distribution width of 0.34 V, corresponding to a breakdown voltage total variation of less than +/- 0.2%. At an excess bias voltage of 3.3 V, which provides 40% pixel-level single photon detection efficiency, we achieve average dark count rates of 2 kHz at an operating temperature of 248 K. We present the characterization of optical crosstalk induced by hot carrier luminescence during avalanche events, where we show that the worst-case crosstalk probability per pixel, which occurs for nearest neighbors, has a value of less than 1.6% and exhibits anisotropy due to isolation trench etch geometry. To demonstrate the FPA response to optical density variations, we show a simple image of a broadened optical beam.
BibTeX
@inproceedings{itzler2009inp,
  author = {Mark A. Itzler and Mark Entwistle and Mark Owens and Xudong Jiang and Ketan M. Patel and Krystyna Slomkowski and Tim Koch and Sabbir Rangwala and Peter F. Zalud and Young Yu and John R. Tower and Joseph Ferraro},
  title = {{InP-based Geiger-mode avalanche photodiode arrays for three-dimensional imaging at 1.06 μm}},
  booktitle = {Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE},
  year = {2009},
  doi = {10.1117/12.820564},
}

Loading related content...

Figure